Hampton Roads (SE Virginia) Rotary Club
#9327
#9328
I'm giving everyone a heads up on some parts that I will be selling. I have a half-bridge ported 12a engine that ran fine when I parked the car to do a 13B-RE twin-turbo engine swap. I will be cleaning it up and doing a compression check on it to make sure every thing still checks out. The engine setup includes a Rotary Extreme dual Weber DCD36 carburetor kit that need to be tuned, I'm great with a laptop and fuel injection, but hate carbs. I am also selling a good 5 speed transmission and long tube racing exhaust system with no cats. The clutch has less the 100 miles on it. I will sell all of it for $1,200.
This is going in
These parts are for sell, I'm in Newport News.
The Weber s in the middle are for sell, not the motorcycle throttle bodies at the bottom
This is going in
These parts are for sell, I'm in Newport News.
The Weber s in the middle are for sell, not the motorcycle throttle bodies at the bottom
#9329
Here is the engine when I installed it 2 years ago, it has less than a 1000 miles on it since being installed and was only run a on a dozen autocross events, no drag racing. The engine is dirty on the outside, but internally it's barely broken in.
flywheel was resurfaced before installing new HD clutch.
The new port size next to the stock port size.
ports
The exhaust system I'm selling
flywheel was resurfaced before installing new HD clutch.
The new port size next to the stock port size.
ports
The exhaust system I'm selling
#9330
yeah its a rotary
iTrader: (1)
Joined: Aug 2005
Posts: 795
Likes: 0
From: Va Beach or IN, indianapolis
rich do you still have those gsl-se front cover and oil pan up for sale? i was wondering if you have the oil pickup tube as well ? i dont think the 6 port pick up tube will work with the other pan.
#9331
I do not have the gsl-se front cover or oil pan. I am how ever giving away for free three 12A short block engines, condition unknown. I'm clearing out my garage to move to Florida and have a lot of 12A parts and 13b NA parts if any one wants something let me know.
#9340
#9341
Is anyone interested in a car that I built for langley's wacky Wednesday, I havent had any free time to do anything to it , email me for details ??? Serious inquiries only.
kenrogers@***.net
kenrogers@***.net
#9342
I don't know where jenros is but I believe I know where the freedom wash is... It's the big one off of indepenent hwy right? What date is the meet up? I may come out if I'm in town that weekend.
#9343
http://www.meetup.com/Hampton-Roads-...=list&offset=0
I guess it's at Awful Arthur's again so expect to meet up there if you can
#9344
yeah its a rotary
iTrader: (1)
Joined: Aug 2005
Posts: 795
Likes: 0
From: Va Beach or IN, indianapolis
Yea it's by Independence...also that meetup is on the 18th of December. Here is the link for the meetup site.
http://www.meetup.com/Hampton-Roads-...=list&offset=0
I guess it's at Awful Arthur's again so expect to meet up there if you can
http://www.meetup.com/Hampton-Roads-...=list&offset=0
I guess it's at Awful Arthur's again so expect to meet up there if you can
#9345
dont use meetup site its not kept up to date. not to sure how often they meet being the colder time of the year i dont think it picks back up till feb? there is another meetup site that is on facebook you might want to give a try. hampton roads rotary club i think it was?
#9346
maybe one of you can help me out. i dont have a mazda but i have a rotary powered beetle. ive been working on getting the engine running and i can get it to run and drive, but i have white smoke coming out from what im guessing is coolant. i really have no history on the engine so im not sure if that is the only problem or really how many miles it has. its a 13b from an 84 or 85. it also has a dellorto carb, racing beat intake manifold and a complete turbo set-up. im not enough of a rotary expert to mess with this engine anymore. does anyone know anybody that buys and sells these engines? not looking for power, i just want a reliable 12a or 13b to stick in there.
#9347
alright dudes I hate to do it but my GSLt2 must go
I dont drive it enough to justify owning it, it needs an owner that can make it into an even better car
1990 t2 motor and trans brand new housings when I got it
stage 3 BNR
Custom Driveshaft
New Tires 90% tread
Removed emissions but will pass state inspection
Megasquirted
apexi turbo timer
greddy blow off valve
msd ignition
Racing beat springs
Tokico 5 setting shocks
rx8 shift ****
Battery relocated behind seat with cutoff switch
the car was gonna be a track car, love it to death but needs someone to restore it, needs tuning and some TLC but will run.
id love to get 3000 for it but will consider reasonable offers
heres a video of me doing a not ***** out pull on it, i was always afraid to take it full throttle. as the few times i did itd get a little loose
http://s131.photobucket.com/albums/p...%20for%20sale/
also still trying to part out my 91 car with black interior and selling my bro's 88 gxl
I dont drive it enough to justify owning it, it needs an owner that can make it into an even better car
1990 t2 motor and trans brand new housings when I got it
stage 3 BNR
Custom Driveshaft
New Tires 90% tread
Removed emissions but will pass state inspection
Megasquirted
apexi turbo timer
greddy blow off valve
msd ignition
Racing beat springs
Tokico 5 setting shocks
rx8 shift ****
Battery relocated behind seat with cutoff switch
the car was gonna be a track car, love it to death but needs someone to restore it, needs tuning and some TLC but will run.
id love to get 3000 for it but will consider reasonable offers
heres a video of me doing a not ***** out pull on it, i was always afraid to take it full throttle. as the few times i did itd get a little loose
http://s131.photobucket.com/albums/p...%20for%20sale/
also still trying to part out my 91 car with black interior and selling my bro's 88 gxl
#9350
maybe one of you can help me out. i dont have a mazda but i have a rotary powered beetle. ive been working on getting the engine running and i can get it to run and drive, but i have white smoke coming out from what im guessing is coolant. i really have no history on the engine so im not sure if that is the only problem or really how many miles it has. its a 13b from an 84 or 85. it also has a dellorto carb, racing beat intake manifold and a complete turbo set-up. im not enough of a rotary expert to mess with this engine anymore. does anyone know anybody that buys and sells these engines? not looking for power, i just want a reliable 12a or 13b to stick in there.
Va