Hampton Roads (SE Virginia) Rotary Club
#8451
hey i'm new to this forum and i'm thinking about getting a rx-7 but i wanted to try sitting in one first being that the closest one for sale is about a hundred miles away. or maybe someone can give me any idea how much room it has. i'm 5'11 250lbs, athletic big man. i had a rsx and that car had plenty of room for me. i researched and compared the interior numbers and they are pretty close so i'm not to worry but i wondering if i can get an idea before i go making a trip to check one out. i understand if any of you guys have this big thing about someone being behind your wheel, but i'm just looking for a little advice really. and by the way i stay in york county and use to go to a few of the car places so i've probably seen some of you guy's cars
*previous owner switched to the base seats when his r1 seats wore thin though if it matters. back half of car is also torn up due to installing a new battery and battery tray, which i haven't done, so its just missing the middle of the car in terms of plastics and such.
#8452
I'm heading up to nova this weekend (fri, to visit parents/help sister move) if you want I'll swing by and you can sit in my fd. see if it fits you. lmk
*previous owner switched to the base seats when his r1 seats wore thin though if it matters. back half of car is also torn up due to installing a new battery and battery tray, which i haven't done, so its just missing the middle of the car in terms of plastics and such.
*previous owner switched to the base seats when his r1 seats wore thin though if it matters. back half of car is also torn up due to installing a new battery and battery tray, which i haven't done, so its just missing the middle of the car in terms of plastics and such.
#8458
Anybody want to buy that fd that I found? I’m thinking that I’m going to sell it and pay off part of my school loan, and do some more work on my turbo fc.
Good:
Touring
73000 miles
Good compression
Boosts good
Good body.
Mostly stock
new tires
Bad:
no 5th gear (no grinding like a bad synkro (sp), just nothing there)
Rear bumper is burnt
Needs some miner body work and paint (there is some plastic in the fender that needs to be ground out and done right, nothing major)
Dash is painted red
Pm or call me if you are interested, I’m not sure how much to ask for it, so I will consider offers.
540 290 2788
Photos
http://www.flickr.com/photos/7876795...7604123708936/
I line close to ODU in Norfolk, and will be home on the evenings if you want to look at it
edit: see this thread for more info on the car
https://www.rx7club.com/3rd-generation-specific-1993-2002-16/new-fd-questions-727214/
Good:
Touring
73000 miles
Good compression
Boosts good
Good body.
Mostly stock
new tires
Bad:
no 5th gear (no grinding like a bad synkro (sp), just nothing there)
Rear bumper is burnt
Needs some miner body work and paint (there is some plastic in the fender that needs to be ground out and done right, nothing major)
Dash is painted red
Pm or call me if you are interested, I’m not sure how much to ask for it, so I will consider offers.
540 290 2788
Photos
http://www.flickr.com/photos/7876795...7604123708936/
I line close to ODU in Norfolk, and will be home on the evenings if you want to look at it
edit: see this thread for more info on the car
https://www.rx7club.com/3rd-generation-specific-1993-2002-16/new-fd-questions-727214/
Last edited by spacemanmort; 04-01-08 at 05:54 PM.
#8459
ah dont hate me but i saw this was mostly va stuff so i had to come in here, i need some work done to my turbo II and i figured id ask around on here instead of vadriven cause most of those guys are honda dudes, pm me if you can help please, and of course...ill pay you the $$$$ haha
#8461
well i need intercooler piping done, a new downpipe(racing beat one only fits stock turbo ) some gauges hooked up, air fuel ratio set, and a few other things i need to remember haha but i need somebody thats in virginia beach
#8462
Anybody want to buy that fd that I found? I’m thinking that I’m going to sell it and pay off part of my school loan, and do some more work on my turbo fc.
Good:
Touring
73000 miles
Good compression
Boosts good
Good body.
Mostly stock
new tires
Bad:
no 5th gear (no grinding like a bad synkro (sp), just nothing there)
Rear bumper is burnt
Needs some miner body work and paint (there is some plastic in the fender that needs to be ground out and done right, nothing major)
Dash is painted red
Pm or call me if you are interested, I’m not sure how much to ask for it, so I will consider offers.
540 290 2788
Photos
http://www.flickr.com/photos/7876795...7604123708936/
I line close to ODU in Norfolk, and will be home on the evenings if you want to look at it
edit: see this thread for more info on the car
https://www.rx7club.com/showthread.php?t=727214
Good:
Touring
73000 miles
Good compression
Boosts good
Good body.
Mostly stock
new tires
Bad:
no 5th gear (no grinding like a bad synkro (sp), just nothing there)
Rear bumper is burnt
Needs some miner body work and paint (there is some plastic in the fender that needs to be ground out and done right, nothing major)
Dash is painted red
Pm or call me if you are interested, I’m not sure how much to ask for it, so I will consider offers.
540 290 2788
Photos
http://www.flickr.com/photos/7876795...7604123708936/
I line close to ODU in Norfolk, and will be home on the evenings if you want to look at it
edit: see this thread for more info on the car
https://www.rx7club.com/showthread.php?t=727214
I have decided to ask $10,000 for the car, some might say that that is a bit high, but I’m gong on the fact that a roller can go for $5-6,000 and one in good shape for $15-20,000 so I’m shooting for the middle. If I don’t get that here I’m going to e-bay it.
I had several people ask for better pictures of the damage and of the inside, I will get that up on Sunday (I’m kind of busy this week), but I will say that the inside is good (except for the dash), with no missing pieces. And most people would not see the plastic in the fender if it were not chipped.
I am not considering trades.
#8463
I have decided to ask $10,000 for the car, some might say that that is a bit high, but I’m gong on the fact that a roller can go for $5-6,000 and one in good shape for $15-20,000 so I’m shooting for the middle. If I don’t get that here I’m going to e-bay it.
I had several people ask for better pictures of the damage and of the inside, I will get that up on Sunday (I’m kind of busy this week), but I will say that the inside is good (except for the dash), with no missing pieces. And most people would not see the plastic in the fender if it were not chipped.
I am not considering trades.
I had several people ask for better pictures of the damage and of the inside, I will get that up on Sunday (I’m kind of busy this week), but I will say that the inside is good (except for the dash), with no missing pieces. And most people would not see the plastic in the fender if it were not chipped.
I am not considering trades.
Actually, I don't know enough about your car to comment on the price...
#8464
Total Rotary Domination!
iTrader: (17)
Joined: Apr 2002
Posts: 1,916
Likes: 1
From: Hampton, Virginia
Hey guys, I have three GSLSE gas tanks that I would love to give to somebody. I don't want to throw them out. Excellent for you guys trying to turbo your first gen.
Free to a good home.
The 1971 Mazda R100 is not included.
Free to a good home.
The 1971 Mazda R100 is not included.
#8465
Va
#8467
I Have what's left of an 85 gs sitting in my parents driveway in Chesapeake and I'm trying to finish parting it out. Here's what it has left:
-rebuilt and streetported 12a with less than 1000 miles on it. Chris Rogers in VA Beach built it a few years back, and it hasn't seen much action. I paid 1600 to have it rebuilt, and I'm willing to take drastically less than that now.
-GSL-SE suspension. The rear has new axle seals and bearings, pads, and resurfaced rotors. The fronts haven't had anything done to it yet, and sat outside at one point.
-Glass, dash, oil cooler, transmission, summit fuel cell are all available. Give me a call or PM me about anything. Make an offer!
757-650-3199
Jake
-rebuilt and streetported 12a with less than 1000 miles on it. Chris Rogers in VA Beach built it a few years back, and it hasn't seen much action. I paid 1600 to have it rebuilt, and I'm willing to take drastically less than that now.
-GSL-SE suspension. The rear has new axle seals and bearings, pads, and resurfaced rotors. The fronts haven't had anything done to it yet, and sat outside at one point.
-Glass, dash, oil cooler, transmission, summit fuel cell are all available. Give me a call or PM me about anything. Make an offer!
757-650-3199
Jake
#8468
I was going on what I was told, I will reconsider and post a new price.
#8469
#8470
I posted in the Richmond section and got flamed a bit over the price, so you are not the only person that I am reacting to.
If you are going to be in Norfolk and have some time let me know, I would like you to swing by and give a quick assessment of the car.
If you are going to be in Norfolk and have some time let me know, I would like you to swing by and give a quick assessment of the car.
#8471
Yeah, but everyone bitches about the price of FD's. That's why our cars haven't kept up in price as we'd like. There's alot of variables in the "market" value for a car. But if sellers are willing to sell for a lower price, then the perceived value goes down. If you're in no hurry to sell the car, pick a price that you think is fair and eventually someone will buy it. I'll check what's going on this weekend and I'll try to stop by.
#8474
Hey guys!! does anyone have an upper/passenger side/front (whatver you want to call it) line for the oil cooler for an FC3S???
i call it the upper line, but i called mazda and they call it the passenger side line, and my friend called it the front line. it the short line that connects the oil cooler to the motor. i need this ASAP. im trying to keep it local so i can pick it up tommorrow!!! any help is appricited. thanks!!!
i call it the upper line, but i called mazda and they call it the passenger side line, and my friend called it the front line. it the short line that connects the oil cooler to the motor. i need this ASAP. im trying to keep it local so i can pick it up tommorrow!!! any help is appricited. thanks!!!