Hampton Roads (SE Virginia) Rotary Club
#8326
Rotary Freak
Thread Starter
Join Date: Sep 2001
Location: VA
Posts: 1,542
Likes: 0
Received 0 Likes
on
0 Posts
Saturday, February 16, 2008 at 4:00 PM
Where
AMF York Lanes
4200 George Washington Mem Hwy
Yorktown , VA 23692
(757) 890-0495
Organized by
calvinGSLSE
Details
Ok The location is correct. AMF York Lanes. At 4:00 PM.
Sorry I didn't get to setting up the date sooner. Bring you ***** (bowling ***** that is).
Be there or be square.
Lots of guys have said they would be there that are not on this site, so our turnout should be pretty good.
Where
AMF York Lanes
4200 George Washington Mem Hwy
Yorktown , VA 23692
(757) 890-0495
Organized by
calvinGSLSE
Details
Ok The location is correct. AMF York Lanes. At 4:00 PM.
Sorry I didn't get to setting up the date sooner. Bring you ***** (bowling ***** that is).
Be there or be square.
Lots of guys have said they would be there that are not on this site, so our turnout should be pretty good.
#8327
Senior Member
iTrader: (2)
Join Date: Mar 2006
Location: gloucester
Posts: 665
Likes: 0
Received 0 Likes
on
0 Posts
Check thread....looking to get my car Tuned.............please help
https://www.rx7club.com/ne-rx-7-forum-30/va-nc-md-looking-pfc-tune-730536/
https://www.rx7club.com/ne-rx-7-forum-30/va-nc-md-looking-pfc-tune-730536/
#8330
Rotary Freak
Join Date: May 2001
Location: Hampton Roads, VA
Posts: 2,340
Likes: 0
Received 0 Likes
on
0 Posts
Ren
#8331
yeah its a rotary
iTrader: (1)
Join Date: Aug 2005
Location: Va Beach or IN, indianapolis
Posts: 795
Likes: 0
Received 0 Likes
on
0 Posts
Calvin
do know when the club is going to have another meet at jenros im not sure when that event starts up again. and also wanted to know when we are doing another awful arther meets
do know when the club is going to have another meet at jenros im not sure when that event starts up again. and also wanted to know when we are doing another awful arther meets
#8333
Registered RX8 User
Join Date: Dec 2007
Location: Hampton, VA and Jacksonville,FL
Posts: 32
Likes: 0
Received 0 Likes
on
0 Posts
#8340
Full Member
Join Date: Nov 2007
Location: Gloucester, VA
Posts: 71
Likes: 0
Received 0 Likes
on
0 Posts
my car is completely mess up...i cant get it to start
is there anyone who can do a house call and try and get it running again
will pay cash, just dont want to a garage that doesnt know anything about the rotary
is there anyone who can do a house call and try and get it running again
will pay cash, just dont want to a garage that doesnt know anything about the rotary
#8341
yeah its a rotary
iTrader: (1)
Join Date: Aug 2005
Location: Va Beach or IN, indianapolis
Posts: 795
Likes: 0
Received 0 Likes
on
0 Posts
can you go into more detail as to why the car wont start? is it flooding? no spark? no fuel ? need more details bud. stock EFI?
#8343
yeah its a rotary
iTrader: (1)
Join Date: Aug 2005
Location: Va Beach or IN, indianapolis
Posts: 795
Likes: 0
Received 0 Likes
on
0 Posts
is the motor turning with the starter? does the motor turn freely?
do you know how to test your trailing and leading coil packs?
or do you have spare trailing and leading coil packs for testing? if not i have spare ones of those too.
do you know how to test your trailing and leading coil packs?
or do you have spare trailing and leading coil packs for testing? if not i have spare ones of those too.
#8345
yeah its a rotary
iTrader: (1)
Join Date: Aug 2005
Location: Va Beach or IN, indianapolis
Posts: 795
Likes: 0
Received 0 Likes
on
0 Posts
for some reason i want to think its a VAC leak...
can you keep the motor running by holding the gas pedal down? or will it still idle down and die that way also?
if you still cant get her running PM me your phonenumber. Id like to offer some help i might be able to help you out on the weekend.
my college has me hella busy with tons of homework.... " ATI". im working to getting my ASE certification.
can you keep the motor running by holding the gas pedal down? or will it still idle down and die that way also?
if you still cant get her running PM me your phonenumber. Id like to offer some help i might be able to help you out on the weekend.
my college has me hella busy with tons of homework.... " ATI". im working to getting my ASE certification.
#8346
Full Member
Join Date: Nov 2007
Location: Gloucester, VA
Posts: 71
Likes: 0
Received 0 Likes
on
0 Posts
thats what i have been thinking
we had the car so i would idle for a few minutes then kill its self
but after doing alot of test its hard to start..meaning it wont idle
im buying a turbo tomorrow and it should be in in a few days
we had the car so i would idle for a few minutes then kill its self
but after doing alot of test its hard to start..meaning it wont idle
im buying a turbo tomorrow and it should be in in a few days
#8347
Rotary Freak
iTrader: (1)
Join Date: Mar 2004
Location: Grafton ,Va
Posts: 2,063
Likes: 0
Received 0 Likes
on
0 Posts
ok lets start at this , what have you done to the car since the car last ran well ???
Have you in anyway done anything to the intake ????
you mentioned the turbo was not spooling up ??????? was this before you did the exaust work ???
Sorry for being so forward , but we could use all the info you could provide
Have you in anyway done anything to the intake ????
you mentioned the turbo was not spooling up ??????? was this before you did the exaust work ???
Sorry for being so forward , but we could use all the info you could provide
#8348
Full Member
Join Date: Nov 2007
Location: Gloucester, VA
Posts: 71
Likes: 0
Received 0 Likes
on
0 Posts
i put a apex gt spec system on it
crap started happening like the car would not run good as in not over 20 mph and it would take a long time for the car to rev up when i had full throtle
stock intake with mas
the turbo is now not spooling up , i think it is shoot there is oil everywhere in the piping
before i did anything to the car like a month ago when i would drive the car and when i would accerlate hard the car would bunny hop at high rpms and the turbo would bunny hop
a few of my friends and people on the fourm are saying its more then likely a VAC leak. i have checked just about everywhere but i cant find it
hopefully it will be the turbo seal is makign the car run like crap and when i replace it everything will go back to the normal,
i have checked the coils both trailing and leading
crank angle sensor
all rubber hoese
changed spark plus
tested alot of the electronis with multimeter
re-grounded the engine to the firewall
crap started happening like the car would not run good as in not over 20 mph and it would take a long time for the car to rev up when i had full throtle
stock intake with mas
the turbo is now not spooling up , i think it is shoot there is oil everywhere in the piping
before i did anything to the car like a month ago when i would drive the car and when i would accerlate hard the car would bunny hop at high rpms and the turbo would bunny hop
a few of my friends and people on the fourm are saying its more then likely a VAC leak. i have checked just about everywhere but i cant find it
hopefully it will be the turbo seal is makign the car run like crap and when i replace it everything will go back to the normal,
i have checked the coils both trailing and leading
crank angle sensor
all rubber hoese
changed spark plus
tested alot of the electronis with multimeter
re-grounded the engine to the firewall
#8350
Saying Hello...
Got pointed to this thread and thought I would drop in and say whats up. I live in Hampton Roads, but am new to the boards here. I am in the middle of a search for an FC RX7 (looking to find one somewhere in VA). Looking for a running, not heavily modified RX 5-speed. Want to use as a daily driver/wrench turning car (I just finished a vintage resto and am done with really old cars for now).