ProjectR13B

iTrader: (1)

i might be able to make it. i seem to never be able to make it to any meets because of work, but i dont work sat. anymore.

and renegade, i hope i dont have your teacher tomorrow night then. your probably in a different math than i am though, im in 105.

and i will not be at langly, i would have made it for the last couple of hours, but i have a full class tonight because we did all the introduction b/s on monday.

ProjectR13B

iTrader: (1)

oh and anytone who wants my S4, $300 or best off for you local folk, and if you need help i will make an attempt to help tow it home for you. the most towing ive done though is with my S5 and that was only 4 blocks using a tow rope and having my dad steer and brake the car.

calvin

Rich, I forgot to post the link to the race wheel place that makes the inexpensive FB wheels.

http://www.diamondracingwheels.com/

Here is the page with the 4x110 rims.

http://www.diamondracingwheels.com/RoadRaceSeries.htm

13x7 lightweights for $59 each.... can't complain too much..

turbo2SE

iTrader: (1)

what is wrong with the s4? or what does it need? i forgot and where in hampton is located at?? im doing a little shopping around .

Chris i might get that fb but that might be like next month? so if you are ready to buy it go for it man.

Rich would this turbo work say if i didnt go the rebuild rought?
funny thing is i dont see a waiste gate on it ....
http://cgi.ebay.com/ebaymotors/ws/eB...RK%3AMEWA%3AIT

RacerXtreme7

iTrader: (2)

NO, that turbo is way too small. Your not going to find a turbo that will bolt on to the stock manifolds. It'll have to be a hybrid or, you'll need to go full single turbo build with manifolds, custom down pipe, new oil/water lines etc.

And those rebuild kits that were recommended earlier are NOT the correct ones. You need a T3/T4 rebuild kit, NOT a T25.

I'll see all you guys at the track tonight. HOPEFULLY I wont be there too late, I have to be somewere else for a while. Is everyone going to be in the pits tonight, or some in the stands (assumming ken and Rich get their rides on the track tonight )?

~Mike..........

VaGambler

iTrader: (1)

Hry monty , wouldn't be quicker for you to email/ call the vendor and ask them it it will fit your application ???? It would really stink if someone gave you their opinion and they were wrong . You would probably get a faster reply also

Good luck either way

Va

turbo2SE

iTrader: (1)

ive called them like 5 times and they still havent returned any of my calls im emailing them atm.

VaGambler

iTrader: (1)

Hey Mike , Everyone usually goes in the stands . I am 99% i'll be there

C U Then

ProjectR13B

iTrader: (1)

it's a gxl and its a parts car. no clutch pedal assembly, blown engine, someone bought the seats, window switches, and window regulator. i do have an auto brake pedal i could throw in there, i wouldnt recommend driving the car because it has rust on the floor pan pretty bad, although is has been patched, its still there. if i could i would run it at langly because it has good suspension, good brakes, and a fairly strong lsd and tranny. i might even let it go for $250 if its to one of you guys ive been talking to alot or have met. just let me know if you want any other info on it monty, and good luck with your turbo rebuild.

8725 orcutt ave, 23666 hampton, va. im right down the street from sears. up hear.

rizzxx7

iTrader: (4)

Hey Calvin, I'm trying to pre-register on the autocross thing and I don't know what class I should put my car in or does it really matter since they will do all that during the inspection?

Johny zoom

iTrader: (5)

Good luck guys Givem hell I wish I was there. Pleast post results




Johny

turbo2SE

iTrader: (1)

calvin any ideas on where this is going to be planned at ? you dont have a location for this one yeat.

calvin

Just put down "unknown". I think you are going to be in SM (street Modified) but I am not sure enough to give you a good answer.

ProjectR13B

iTrader: (1)

i made a post on autocross.us and they told me basically what my class would be.

calvin

There is also a link to a DIY classing web page... basically check off mods and list type of car and it gives you the class. I have never used it...

Autocross.us is a great resource for autocrossers.

ProjectR13B

iTrader: (1)

i did the check off list aswell calvin haha. came up with the same thing. and your right it is a great website and everyone i've talked to so far have been very friendly and helpful, unlike the last time i used dragva.com and i only got one response to search when i asked about meeting local drifters

renagade_rotary

red is what i want

the color scheme for both my 7's are red and black

VaGambler

iTrader: (1)

Hey guys / Calvin ???? Does anyone know where I can find some suspension parts, I dont know if you have any sitting aound your garage you might want to sell . This is for a 83 GXL

Thanks in advance

calvin

What are you looking for in "suspension parts" I have some stuff, I have sold off most of my extras that I was not using, but I still have some. Give me a grocery list and I will see what I have.

So how did things go at the track last night?

RacerXtreme7

iTrader: (2)

Langley last night...........

Rich in his 1st gen 83 GXL gave it a good effort being the power output in the car is LOW, having hard street tires and considering Rich's time behind the wheel of the car was limited to the 7 minute drive from Kenny's to the track lol. His result in the time trials was a 25.XX minutes. Then 1st lose (To a Honda), sent to B class. B Race, bi-run RICH WON!! B main, Rich loses again to a Honda, out of the race. Grudge match..... Rich loses to a Honda again, driven by a girl. He nearly caught her and lost maybe by 3 ~5 feet. Rich enters burn out contest....... revs to 7k, dumps clutch.. tires start to roast... then slowly slows down. Car just doesn't have the power (original 12a STOCK complete with all emissions, AC, etc and 120k on the clock). Was a fun night, gotta give it to Rich for actually getting out there in a car hes only had litterally minutes behind the wheel in (Though he lost to 3 Hondas and a girl lol). We need tires for this car, anyone have some good 13" slicks or auto cross tires? A full exhaust would be nice too (Jerry, you reading this?)

Kenny's results. Time trials, I think was 23.XX minutes, you could tell he wasen't running very hard. Before the race we took the car for a ride around the block so I could watch his A/F and boost pressures while he kept his eyes on the road. His third gear would grind every up or down shift. First race, kenny loses (240 sx I think {I'm 3 beers deep at this point lol}), he's looking to get into the B class (*caugh* sandbagging again *wink*). B main Kenny gets eliminated due to not being able to use 3rd gear and getting beat by a (Damn, can't remember {beer # ??? by now}). BTW, Kenny is one hell of a launcher, comes off the line STRONG. Grudgematch later against Rich in his first gen. Kenny takes it by a huge margine.

Was a great night even though the 7's didn't win a darn thing. Kudo's to both guys for getting something running and getting their butts out there a racing and entertaining many .

For Kenny's car, 1st tranny needs work, then engine tunning (guess Ken, me, Rich need to read up on the WOLF manual and get the wide band hooked up). Then Some suspension tweaking.

Over the next few races these guys will be good competition.

~Mike...........

VaGambler

iTrader: (1)

anything that would help Rich with his 1st gen ,
tires/ exaust/ any suspension ????
just about anything ????

VaGambler

iTrader: (1)

Damn good job Mike !!!!!! I miss having a beer with you guys , but being in the pits was very interesting , hahaha .Randy was able to video most of the night , but we need to put it on the computer and Im not sure how this is going to happen ????

RacerXtreme7

iTrader: (2)

Hmmmm I'm a geek, but not a computer geek lol. I'm mechanical. I'm sure someone on here knows how to get the vid on here.

~Mike...........

calvin

Was Shawn there (my friend in the yellow/black stripes Miata). If so, do you know how he did?

ProjectR13B

iTrader: (1)

damn i wish i coulda been there. sounds like it was an interesting night. i got out of class at 8:30 so i could have made it if i would have thought about it.