Hampton Roads (SE Virginia) Rotary Club
#5676
Rotary Freak
iTrader: (1)
Join Date: Mar 2004
Location: Grafton ,Va
Posts: 2,063
Likes: 0
Received 0 Likes
on
0 Posts
Originally Posted by renagade_rotary
kenny didnt that wall get the better of that rex?
#5677
Rotary Freak
Thread Starter
Join Date: Sep 2001
Location: VA
Posts: 1,542
Likes: 0
Received 0 Likes
on
0 Posts
Pete, I am so far from the prep limit of CSP. I am not going to fully prep it, but I would like to get the torsen in the damn thing, that would go a long way towards making it better.
You know, I go to lots of effort to keep things up to date on:
http://rx7.meetup.com/55/events/
and
http://www.hamptonroadsrotaryclub.co...61a19902e78d29
There are 6 really cool events listed there, that you guys could check maybe once a month and mark them on your personal calendar. Then you might be able to plan for our events and made it occasionally. You know I don't list them there for my own good, I know about them and plan so I can go to as many as my life commitments will allow.......
Sorry, I am just in a really bad mood this morning.
what date in september
http://rx7.meetup.com/55/events/
and
http://www.hamptonroadsrotaryclub.co...61a19902e78d29
There are 6 really cool events listed there, that you guys could check maybe once a month and mark them on your personal calendar. Then you might be able to plan for our events and made it occasionally. You know I don't list them there for my own good, I know about them and plan so I can go to as many as my life commitments will allow.......
Sorry, I am just in a really bad mood this morning.
#5678
Rotary Freak
Thread Starter
Join Date: Sep 2001
Location: VA
Posts: 1,542
Likes: 0
Received 0 Likes
on
0 Posts
Check out the car the new member on the meetup site has. I would almost put up with a thrid gen if I could find a nice R1.
http://rx7.meetup.com/55/members/3056740/
http://rx7.meetup.com/55/members/3056740/
#5679
Senior Member
Join Date: Oct 2004
Location: norfolk,Va
Posts: 261
Likes: 0
Received 0 Likes
on
0 Posts
thats me james, calvin. i was wandering around the internet and decided to sign up/post some stuff on other hr rotary sites. I'm pretty sure you met me at the aik meet a few saturdays ago. You were an older gentleman, with curly hair i think. The one orgainzing and made plans for the wacky wednesday meet.( i missed because of dumb battery) I was the light skinned tall skinny guy. Brought along a white kid named aaron who's into rx7s. I'll try to make it out to the upcoming meets at aweful arthurs.
Last edited by MR2_spaceMONKEY; 07-27-06 at 01:14 PM.
#5682
Rotary Freak
iTrader: (5)
Join Date: Jun 2002
Location: Va
Posts: 1,549
Likes: 0
Received 0 Likes
on
0 Posts
https://www.rx7club.com/showthread.php?t=559457
Kenny go pick this up!!
Im sure Calvin is older but I don't know about the gentleman part. haha
Monty Isn't that a NON Turbo ecu?
Kenny go pick this up!!
Im sure Calvin is older but I don't know about the gentleman part. haha
Monty Isn't that a NON Turbo ecu?
#5683
Rotary Freak
Thread Starter
Join Date: Sep 2001
Location: VA
Posts: 1,542
Likes: 0
Received 0 Likes
on
0 Posts
James, I remember meeting you, and I am the one you thought. I just didn't get much of a chance to talk to you that night. I liked your car. Glad to see you around.
Did Jake run his RX7 last night. He said that he and Rich were there but didn't see anyone else. Apparently he ran and spun out, but I am not sure which car he was running.
Did Jake run his RX7 last night. He said that he and Rich were there but didn't see anyone else. Apparently he ran and spun out, but I am not sure which car he was running.
#5684
yeah its a rotary
iTrader: (1)
Join Date: Aug 2005
Location: Va Beach or IN, indianapolis
Posts: 795
Likes: 0
Received 0 Likes
on
0 Posts
Originally Posted by Johny zoom
https://www.rx7club.com/showthread.php?t=559457
Kenny go pick this up!!
Im sure Calvin is older but I don't know about the gentleman part. haha
Monty Isn't that a NON Turbo ecu?
Kenny go pick this up!!
Im sure Calvin is older but I don't know about the gentleman part. haha
Monty Isn't that a NON Turbo ecu?
#5685
Rotary Freak
Thread Starter
Join Date: Sep 2001
Location: VA
Posts: 1,542
Likes: 0
Received 0 Likes
on
0 Posts
Here you go guys. Infor from the horse's mouth about the next track event I plan on attending.
https://www.rx7club.com/forum/showthread.php?t=562980
Don't say I didn't tell you about it.
https://www.rx7club.com/forum/showthread.php?t=562980
Don't say I didn't tell you about it.
#5688
Rotary Freak
iTrader: (1)
Join Date: Mar 2004
Location: Grafton ,Va
Posts: 2,063
Likes: 0
Received 0 Likes
on
0 Posts
Originally Posted by calvin
James, I remember meeting you, and I am the one you thought. I just didn't get much of a chance to talk to you that night. I liked your car. Glad to see you around.
Did Jake run his RX7 last night. He said that he and Rich were there but didn't see anyone else. Apparently he ran and spun out, but I am not sure which car he was running.
Did Jake run his RX7 last night. He said that he and Rich were there but didn't see anyone else. Apparently he ran and spun out, but I am not sure which car he was running.
#5689
Rotary Freak
iTrader: (1)
Join Date: Mar 2004
Location: Grafton ,Va
Posts: 2,063
Likes: 0
Received 0 Likes
on
0 Posts
Originally Posted by ProjectR13B
I'm trying to get my car up and running asap. i'll come and run. as much as i wouldnt want to, if i hit the wall i hit the wall. i'm making a drift car, i expect to hit a few walls out at the track.
My softball season is about over 1-3 weeks . This will give me another 2 nights in the garage
#5690
No es bueno.
iTrader: (1)
i need my engine rebuilt, to order my oil cooler line and my header, and to order my clutch master cylinder and get a bit of clutch line, reinstall everything, and build the bracket for a manual tranny and get it put in, and mount some seats and put on an aluminum hood. and thats if i dont wait to get the rest of my exhaust. i also was planning on replacing my water pump and my motor mounts, and swapping my new brake master cylinder from my S4 to the S5. and i need to put in the manual gauge cluster and get three more bolts for my new steering wheel. oh and swap the rims for my vert rims. i am a bit behind haha.
Last edited by ProjectR13B; 07-27-06 at 06:33 PM. Reason: forgot something
#5691
Rotary Freak
iTrader: (5)
Join Date: Jun 2002
Location: Va
Posts: 1,549
Likes: 0
Received 0 Likes
on
0 Posts
Originally Posted by VaGambler
Damn man thanks a ton . I called the guy and I pick it up on Sat
Thanks a ton I owe ya Johny
Thanks a ton I owe ya Johny
Cool: Give me plenty of notice and Ill come watch you guys at Langley.
Why don't some more of you guys try to make it to the RBQ onthe 12th of Aug?. I know Calvin will be there and Im bringing 3 of my cars Two A.E. 's and " Tiffany"
Johny
Last edited by Johny zoom; 07-27-06 at 07:11 PM.
#5693
yeah its a rotary
iTrader: (1)
Join Date: Aug 2005
Location: Va Beach or IN, indianapolis
Posts: 795
Likes: 0
Received 0 Likes
on
0 Posts
Originally Posted by dbgeek
near to 2am and i finally get to go to bed. SO much for trying to get the work done before 5.
i know the felling with me trying to do everything with simple hand tools......pete normaly i would call but i dont want to run out of minutes lol as promissed im working on getting the money saved for that megasquirt from peter
as for that MAP you was talking about which one you talking about??
i dont think ill need a MAP after words since the megasquirt will not ever use it .
Last edited by turbo2SE; 07-28-06 at 01:02 AM.
#5694
Rotary Freak
Thread Starter
Join Date: Sep 2001
Location: VA
Posts: 1,542
Likes: 0
Received 0 Likes
on
0 Posts
Pete, everything just always goes that way. I have hundreds of those stories of getting race cars ready for the track the comming weekend, when you thought you had plenty of time, and no matter what getting ready always pushes you up to the last minute.
#5695
Rotary Freak
Thread Starter
Join Date: Sep 2001
Location: VA
Posts: 1,542
Likes: 0
Received 0 Likes
on
0 Posts
I am also going to start pushing the RBQ. It is a really good event that some of us should try to make. One day out at the race track, bring your wife, girlfriend, kids if you want. I will probably bring Shelby (my daughter, not my car) with me. It costs the same as the normal ticket for the race for the day, but they feed you, let you take parade laps around the track, and you get to watch some great racing. Bring a folding chair as that might make the event more enjoyable. If you haven't been to VIR, this is a good event to so see what the place looks like. Bring yourself, your car would be nice, but not mandatory, a camera would make it more enjoyable because you will see tons of cool stuff. You will also meet about a hundred other Mazda enthusiasts that you haven't met before. Not all of them are rotary, but most of them are.
Here are my pictures with my cheap little digital camera last year
http://www.racecarstuff.com/photos/v...05_msccnc_rbq/
Here is the link for information and to sign up:
http://rx7.meetup.com/55/events/4867954/
Here are my pictures with my cheap little digital camera last year
http://www.racecarstuff.com/photos/v...05_msccnc_rbq/
Here is the link for information and to sign up:
http://rx7.meetup.com/55/events/4867954/
Last edited by calvin; 07-28-06 at 08:43 AM.
#5696
Not a Racist
Join Date: Aug 2003
Location: virginia
Posts: 1,514
Likes: 0
Received 0 Likes
on
0 Posts
im taking
Math04
Accounting211
History 111
philosophy ethics 220
total of 14 credits for my first semester
next semester i think im going to switch from philosophy to photography
Math04
Accounting211
History 111
philosophy ethics 220
total of 14 credits for my first semester
next semester i think im going to switch from philosophy to photography
#5698
Not a Racist
Join Date: Aug 2003
Location: virginia
Posts: 1,514
Likes: 0
Received 0 Likes
on
0 Posts
oh btw an update on the megasquirt
we got it to start up and run smoother last night (well my dad did while i was at work)
saturday im working while hes gunna be home so he will be working on getting a datalog for startup and warm up
we got it to start up and run smoother last night (well my dad did while i was at work)
saturday im working while hes gunna be home so he will be working on getting a datalog for startup and warm up
#5699
yeah its a rotary
iTrader: (1)
Join Date: Aug 2005
Location: Va Beach or IN, indianapolis
Posts: 795
Likes: 0
Received 0 Likes
on
0 Posts
Originally Posted by renagade_rotary
oh btw an update on the megasquirt
we got it to start up and run smoother last night (well my dad did while i was at work)
saturday im working while hes gunna be home so he will be working on getting a datalog for startup and warm up
we got it to start up and run smoother last night (well my dad did while i was at work)
saturday im working while hes gunna be home so he will be working on getting a datalog for startup and warm up