Hampton Roads (SE Virginia) Rotary Club
#4777
Back to the DrawingBoard.
iTrader: (32)
Join Date: Aug 2004
Location: Va
Posts: 2,526
Likes: 0
Received 0 Likes
on
0 Posts
Originally Posted by Johny zoom
Good seeing Cal & yoshi again, and meeting everyone else.
To duane and Kenny, Couldn't make the meet because of the wife, or a girl?
I've heard of "**** block" but never a RX block. hahah
To Fransisco good luck on the move, I heard from a "friend" that you are leaving town because you are scared of a certian station wagon. ( can you tell I hung out w/ Jerry) ha.
Jerry Im betting on the wagon
Pretty uneventful drive home except terrible accident on 58 outside of suffok east bound was blocked and it appeared to have mutilpal fatalitys. (laying in the road)ugg.
and about 30 miles from home the fog sat in so I was cruising at 40 mph visibilty about 10 ft
Take care
Johny
To duane and Kenny, Couldn't make the meet because of the wife, or a girl?
I've heard of "**** block" but never a RX block. hahah
To Fransisco good luck on the move, I heard from a "friend" that you are leaving town because you are scared of a certian station wagon. ( can you tell I hung out w/ Jerry) ha.
Jerry Im betting on the wagon
Pretty uneventful drive home except terrible accident on 58 outside of suffok east bound was blocked and it appeared to have mutilpal fatalitys. (laying in the road)ugg.
and about 30 miles from home the fog sat in so I was cruising at 40 mph visibilty about 10 ft
Take care
Johny
#4778
Back to the DrawingBoard.
iTrader: (32)
Join Date: Aug 2004
Location: Va
Posts: 2,526
Likes: 0
Received 0 Likes
on
0 Posts
Originally Posted by VaGambler
sounds like a garage sale , what good stuff do you have ??? I get 1st dibs , give me a call Or comeon over .
#4784
Back to the DrawingBoard.
iTrader: (32)
Join Date: Aug 2004
Location: Va
Posts: 2,526
Likes: 0
Received 0 Likes
on
0 Posts
Originally Posted by Johny zoom
I know you can't wait to take off the damn front lic. plate, I keep mine under the seat ( I know I'm asking for it)
Sweet ride.
Sweet ride.
#4785
Rotary Freak
Thread Starter
Join Date: Sep 2001
Location: VA
Posts: 1,542
Likes: 0
Received 0 Likes
on
0 Posts
It was good to see everyone, thanks for comming. We had a pretty good time. Megan actually hung out with us for a while before we either got her mad or bored and she went and sat in the car :-).
Next month at Awful Arthurs. Everyone be there and see what you missed this week.
Next month at Awful Arthurs. Everyone be there and see what you missed this week.
#4786
Rotary Freak
iTrader: (1)
Join Date: Oct 2003
Location: Hampton, Va
Posts: 2,506
Likes: 0
Received 0 Likes
on
0 Posts
Originally Posted by calvin
It was good to see everyone, thanks for comming. We had a pretty good time. Megan actually hung out with us for a while before we either got her mad or bored and she went and sat in the car :-).
Next month at Awful Arthurs. Everyone be there and see what you missed this week.
Next month at Awful Arthurs. Everyone be there and see what you missed this week.
#4789
Rotary Freak
iTrader: (1)
Join Date: Mar 2004
Location: Grafton ,Va
Posts: 2,063
Likes: 0
Received 0 Likes
on
0 Posts
Originally Posted by renagade_rotary
hey kenny do you still have all your stuff you used for annodizing?
id like to get sumthin set up this summer
id like to get sumthin set up this summer
#4790
Rotary Freak
iTrader: (1)
Join Date: Mar 2004
Location: Grafton ,Va
Posts: 2,063
Likes: 0
Received 0 Likes
on
0 Posts
Originally Posted by FJDRX7
The car is up and running, time for a paint job.....in Georgia of course
#4791
Rotary Freak
Thread Starter
Join Date: Sep 2001
Location: VA
Posts: 1,542
Likes: 0
Received 0 Likes
on
0 Posts
BTW, Johnny, that accident you came across.... I heard about it on the news. It seems a woman stopped her car to try to help a dog that had been hit by a car. As it turns out, the dog was already dead, and the woman was hit and killed by another car. I appreciate trying to help out an animal on the road, but if you ever do it, especially on a road like Rt58 at night, just be careful about cars on the road. I don't think people realize how close and quickly cars come by. Where it happened is very near where my parents live and I always py special attention when I hear about acidents in that area. Mom's driving skills are not quite as sharp as they used to be, and she still drives just as aggressively as she ever did, so maybe I get a little worried whenever I hear about an accident in that general area.
#4792
Total Rotary Domination!
iTrader: (17)
Well, I came back a few hours ago, I went and rode with Dan and his RHD RX-3. We made it to Dinwiddie, it was a beautiful day, I actually got pics of a few rotaries, went to a mini dragracing course, won about $50 in wax products which Dan won also and saw my old GLC with it new owner (a good friend of mine) run a 13.01 quarter mile. Not bad for test and tune. He has to work a few bugs out but he getting there. This guy decided on his own to start rebuilding and porting with a video a few years ago and he has done quite a bit for himself.
This is a street car once he put his exhaust back on, so if you see an orange GLC, don't mess with it. This goes for the bling, bling wish it was fast third gen. *cough* Francisco!!!!!!
This pic when it was starting to launch which he was up in the air taking off and shifting from first to second. He had all kinds of people coming to his pit to wonder what in the world was that thing who killed the 95 Toyota Supra????????
This is a street car once he put his exhaust back on, so if you see an orange GLC, don't mess with it. This goes for the bling, bling wish it was fast third gen. *cough* Francisco!!!!!!
This pic when it was starting to launch which he was up in the air taking off and shifting from first to second. He had all kinds of people coming to his pit to wonder what in the world was that thing who killed the 95 Toyota Supra????????
#4794
Originally Posted by JerryPerez
Well, I came back a few hours ago, I went and rode with Dan and his RHD RX-3. We made it to Dinwiddie, it was a beautiful day, I actually got pics of a few rotaries, went to a mini dragracing course, won about $50 in wax products which Dan won also and saw my old GLC with it new owner (a good friend of mine) run a 13.01 quarter mile. Not bad for test and tune. He has to work a few bugs out but he getting there. This guy decided on his own to start rebuilding and porting with a video a few years ago and he has done quite a bit for himself.
This is a street car once he put his exhaust back on, so if you see an orange GLC, don't mess with it. This goes for the bling, bling wish it was fast third gen. *cough* Francisco!!!!!!
]
This is a street car once he put his exhaust back on, so if you see an orange GLC, don't mess with it. This goes for the bling, bling wish it was fast third gen. *cough* Francisco!!!!!!
]
#4796
yeah that car is crazy. too bad he didnt have his 3 rotor out there or he would of owned that track. the other crew with that FD (blue one) said they have a 3 rotor set up but didnt use it coz of weight issues??
#4797
Total Rotary Domination!
iTrader: (17)
From what I been told the V6 and rotaries cars have a limit on what they can do. The FWD cars can put the biggest turbo and the V6 and rotaries can't do it. This is according to one of the racers out there. BTW, you have a nice white GXL, take care of it.
#4798
DIGG7ER
iTrader: (4)
Join Date: Apr 2001
Location: virginia beach, va.
Posts: 988
Likes: 0
Received 0 Likes
on
0 Posts
Originally Posted by FJDRX7
Yeap, not that hard to do, just time, i need the oil pan brace or the new ground zero oil pan "looks better"
#4799
Back to the DrawingBoard.
iTrader: (32)
Join Date: Aug 2004
Location: Va
Posts: 2,526
Likes: 0
Received 0 Likes
on
0 Posts
Originally Posted by rizzxx7
I have the brace and it completely stopped my leak, I heard people hitting stuff with the ground zero brace and putting holes in them so I just went and bought the brace but the bigger pan would be nice to have but we don't have the nicest roads out here.
#4800
Junior Member
iTrader: (1)
Join Date: Oct 2005
Location: Virginia
Posts: 49
Likes: 0
Received 0 Likes
on
0 Posts
Originally Posted by FJDRX7
The car is up and running, time for a paint job.....in Georgia of course
You can use the $50.00 of my bet of a spanking by Jerry's yellow number 1 to buy 50 cans of walmart spay paint and finish your car!!!