Hampton Roads (SE Virginia) Rotary Club
10-24-05, 07:08 PM
#2877
I know Lou at Little Creek, he deals with rotaries, it all depends what you get done.
On the subject of vintage plates, my 73 RX-3 wagon has actual 73 Virginia plates. When I went to DMV, they told me 2 options... Actual classic/antique you can only drive it to shows, organized events and to the auto repair shop. Only 500 miles a year. Or if you get an inspection and sticker, you can use it as a daily driver, I chose the second because I didn't want to take a chance on it. I always get away without a cat because my cars are non-catalyst models. I show them the stickers in my hood and they scratch their heads....
On the subject of vintage plates, my 73 RX-3 wagon has actual 73 Virginia plates. When I went to DMV, they told me 2 options... Actual classic/antique you can only drive it to shows, organized events and to the auto repair shop. Only 500 miles a year. Or if you get an inspection and sticker, you can use it as a daily driver, I chose the second because I didn't want to take a chance on it. I always get away without a cat because my cars are non-catalyst models. I show them the stickers in my hood and they scratch their heads....
10-24-05, 09:05 PM
#2878
Rotary Freak
Thread Starter
Join Date: Sep 2001
Location: VA
Posts: 1,542
Likes: 0
Received 0 Likes
on
0 Posts
Originally Posted by JerryPerez
I know Lou at Little Creek, he deals with rotaries, it all depends what you get done.
On the subject of vintage plates, my 73 RX-3 wagon has actual 73 Virginia plates. When I went to DMV, they told me 2 options... Actual classic/antique you can only drive it to shows, organized events and to the auto repair shop. Only 500 miles a year. Or if you get an inspection and sticker, you can use it as a daily driver, I chose the second because I didn't want to take a chance on it. I always get away without a cat because my cars are non-catalyst models. I show them the stickers in my hood and they scratch their heads....
On the subject of vintage plates, my 73 RX-3 wagon has actual 73 Virginia plates. When I went to DMV, they told me 2 options... Actual classic/antique you can only drive it to shows, organized events and to the auto repair shop. Only 500 miles a year. Or if you get an inspection and sticker, you can use it as a daily driver, I chose the second because I didn't want to take a chance on it. I always get away without a cat because my cars are non-catalyst models. I show them the stickers in my hood and they scratch their heads....
As far as the non-catlyst, that is the reason several people would go and find a hood for first gen RX7 from an 79 which was a non-catalyst car. I have a non-catalyst exhaust system if anyone is looking for one.
10-25-05, 02:06 PM
#2879
Not a Racist
Join Date: Aug 2003
Location: virginia
Posts: 1,514
Likes: 0
Received 0 Likes
on
0 Posts
lol mine is 3 inches to a flowmaster
if anyone has any small parts they need sand blasted i could do it if you buy the sand lol i havent set up my workshop yet so yeah
but actualy i can pretty much sandblast anything
if anyone has any small parts they need sand blasted i could do it if you buy the sand lol i havent set up my workshop yet so yeah
but actualy i can pretty much sandblast anything
10-25-05, 02:11 PM
#2880
Rotary Freak
iTrader: (1)
Join Date: Oct 2003
Location: Hampton, Va
Posts: 2,506
Likes: 0
Received 0 Likes
on
0 Posts
Finally!!!! I've got new plug wires, ones that actually fit. Bought the 10mm Magnecors. Also got new O rings for my oil pedestal. Hey Brian, whatcha doin' this week???
Not quite sure yet. I know I'll be working at least 1 day this weekend. Maybe friday night I could come by and I could hook you up.
10-26-05, 04:19 PM
#2884
Not a Racist
Join Date: Aug 2003
Location: virginia
Posts: 1,514
Likes: 0
Received 0 Likes
on
0 Posts
lol i just got home but on my way home i saw a supercharged out of state camaro
and my car wasnt runnin properly so i thought id give the guy an ego boost since he was with his girl(im a nice guy)
so i reved a few times my engine was cutting and stuff he pulled up to a stop light revved his engine and i restarted my car revved back and the bov went off
so he decides to fall back behind me for a bit and then i push down on the gas to put some extra fuel in the exhaust then let of rev pop it then KAPOW through a flame right onto his bumper so he tears off around me and thats the last i saw him
and my car wasnt runnin properly so i thought id give the guy an ego boost since he was with his girl(im a nice guy)
so i reved a few times my engine was cutting and stuff he pulled up to a stop light revved his engine and i restarted my car revved back and the bov went off
so he decides to fall back behind me for a bit and then i push down on the gas to put some extra fuel in the exhaust then let of rev pop it then KAPOW through a flame right onto his bumper so he tears off around me and thats the last i saw him
10-26-05, 05:31 PM
#2886
Rexistered User
iTrader: (8)
Join Date: Feb 2004
Location: San Diego, CA
Posts: 660
Likes: 0
Received 0 Likes
on
0 Posts
hey vagambler, remember me. you know where i can pick up some s5 body parts. like a front bumper, and both front fenders, call me 920 392 1079. you told me of a guy, but i lost his card, d'oh
10-26-05, 05:45 PM
#2887
Rotary Freak
iTrader: (1)
Join Date: Mar 2004
Location: Grafton ,Va
Posts: 2,063
Likes: 0
Received 0 Likes
on
0 Posts
Originally Posted by IM [H]ard
hey vagambler, remember me. you know where i can pick up some s5 body parts. like a front bumper, and both front fenders, call me 920 392 1079. you told me of a guy, but i lost his card, d'oh
757-592-5369
Cu
10-26-05, 05:47 PM
#2888
Rotary Freak
iTrader: (1)
Join Date: Mar 2004
Location: Grafton ,Va
Posts: 2,063
Likes: 0
Received 0 Likes
on
0 Posts
by the way did anyone fine those power steerring line , I was looking 4 , the idiot who sold me some has not shipped them out yet 9 3 weeks late ) So im still in need of a line
10-26-05, 09:22 PM
#2891
Rotary Freak
iTrader: (1)
Join Date: Mar 2004
Location: Grafton ,Va
Posts: 2,063
Likes: 0
Received 0 Likes
on
0 Posts
hey bud i just asked him and he says he will take 125.00 for the hoses and air box with the piping to the air box or $25.00 with the new filter he has for it .
Hope that helps
Hope that helps
10-26-05, 09:29 PM
#2892
Rotary Freak
iTrader: (1)
Join Date: Mar 2004
Location: Grafton ,Va
Posts: 2,063
Likes: 0
Received 0 Likes
on
0 Posts
Originally Posted by VaGambler
hey bud i just asked him and he says he will take 125.00 for the hoses and air box with the piping to the air box or $25.00 with the new filter he has for it .
Hope that helps
Hope that helps
Everything for $100.00 all 3 samco hoses and air box with hoses
Hope this helps
10-26-05, 10:11 PM
#2893
Rotary Freak
iTrader: (1)
Join Date: Oct 2003
Location: Hampton, Va
Posts: 2,506
Likes: 0
Received 0 Likes
on
0 Posts
How about just the airbox and the filter? I went ahead and bought a stock hose cheap. What kind of filter? Note I found an airbox with a K&N filter for 30 bucks on the forum.
10-26-05, 10:37 PM
#2895
Rotary Freak
iTrader: (1)
Join Date: Oct 2003
Location: Hampton, Va
Posts: 2,506
Likes: 0
Received 0 Likes
on
0 Posts
Is it a reusable filter? The kind that can be cleaned out? Else how many miles are on it?
If you want to just leave it to just us, give him my cell number: 757.332.1807
If you want to just leave it to just us, give him my cell number: 757.332.1807
Last edited by yuichiror; 10-26-05 at 10:39 PM.
10-26-05, 10:46 PM
#2896
Rotary Freak
iTrader: (1)
Join Date: Mar 2004
Location: Grafton ,Va
Posts: 2,063
Likes: 0
Received 0 Likes
on
0 Posts
Originally Posted by yuichiror
Is it a reusable filter? The kind that can be cleaned out? Else how many miles are on it?
If you want to just leave it to just us, give him my cell number: 757.332.1807
If you want to just leave it to just us, give him my cell number: 757.332.1807
good luck
10-27-05, 07:18 AM
#2897
Rotary Freak
iTrader: (1)
Join Date: Oct 2003
Location: Hampton, Va
Posts: 2,506
Likes: 0
Received 0 Likes
on
0 Posts
VA, send your friend my contact info or is he commin' to your place again tonight? I'd like to take a look at the hose set he wants to sell. I was going to buy the elbow from someone else, but it turns out he didn't have one.
10-27-05, 08:38 AM
#2898
Rotary Freak
iTrader: (1)
Join Date: Mar 2004
Location: Grafton ,Va
Posts: 2,063
Likes: 0
Received 0 Likes
on
0 Posts
Originally Posted by yuichiror
VA, send your friend my contact info or is he commin' to your place again tonight? I'd like to take a look at the hose set he wants to sell. I was going to buy the elbow from someone else, but it turns out he didn't have one.