Got my CYM back from PFSupercars.....
#1
Thread Starter
Living life 9 seconds at a time
iTrader: (2)
Joined: Feb 2001
Posts: 6,541
Likes: 0
From: Abingdon, Md
Got my CYM back from PFSupercars.....
Hey guys. Its been awhile, but got my car back.
New motor consists of 2mm cryro'ed apex seals, guru motorsports 2 piece e-shaft, lightened rotors, 1/2" engine stud kit, and a large PFS street port.
Tranny is a PPG straight cut gear/dog box.
At 19psi it made 520rwhp; not too shabby for the street...
After I put up some times, I'll let you guys know what I put down at 38psi!!!
I've been driving it on the street all day. **** is plain nuts! Tranny is so loud, I need a advil, lol.....Gonna put a stock tranny in till summer, then swap back for racing.
Props to Ray Wilson for doing a great job and for putting up with me! lol..
New motor consists of 2mm cryro'ed apex seals, guru motorsports 2 piece e-shaft, lightened rotors, 1/2" engine stud kit, and a large PFS street port.
Tranny is a PPG straight cut gear/dog box.
At 19psi it made 520rwhp; not too shabby for the street...
After I put up some times, I'll let you guys know what I put down at 38psi!!!
I've been driving it on the street all day. **** is plain nuts! Tranny is so loud, I need a advil, lol.....Gonna put a stock tranny in till summer, then swap back for racing.
Props to Ray Wilson for doing a great job and for putting up with me! lol..
Last edited by ErnieT; 12-15-06 at 04:19 PM.
#4
Thread Starter
Living life 9 seconds at a time
iTrader: (2)
Joined: Feb 2001
Posts: 6,541
Likes: 0
From: Abingdon, Md
Originally Posted by Fd3BOOST
Glad to hear you got it back home. Hope all goes well and I see you down here in Spring. I'll buy the beers after you make it down the track in one piece.
It going to the body shop this week for my burn-out front end, feed spoiler, and feed carbon fiber sideskirts.
#5
got my car back from pfs the week before ernie got his back. ray is a great guy. stands by his work. hey ernie i want to put my cheapo mazdaspeed replica on where are you taking y ours. kvn
#7
Originally Posted by Fd3BOOST
Glad to hear you got it back home. Hope all goes well and I see you down here in Spring. I'll buy the beers after you make it down the track in one piece.
Trending Topics
#10
Thread Starter
Living life 9 seconds at a time
iTrader: (2)
Joined: Feb 2001
Posts: 6,541
Likes: 0
From: Abingdon, Md
Originally Posted by amp
sounds potent..
lemme know if you have no use for the stock spoiler and front bumper skin....
lemme know if you have no use for the stock spoiler and front bumper skin....
#13
OMG,
I was wondering why it was so warm out, Hell did freeze over LOL
I can’t wait to see that thing run down the track, And to see how deep into the 700’s you got @ 38psi. What did you set the redline up @.
I take it PPG is now making upgraded output shafts?
I was wondering why it was so warm out, Hell did freeze over LOL
I can’t wait to see that thing run down the track, And to see how deep into the 700’s you got @ 38psi. What did you set the redline up @.
I take it PPG is now making upgraded output shafts?
#14
Glad to see you are back in business. Tracks open in 2 months, I know you are anxious!!
Good luck w/ everything.
Anthony
Good luck w/ everything.
Anthony
Originally Posted by ErnieT
Hey guys. Its been awhile, but got my car back.
New motor consists of 2mm cryro'ed apex seals, guru motorsports 2 piece e-shaft, 1/2" engine stud kit, and a large PFS street port.
Tranny is a PPG straight cut gear/dog box.
At 19psi it made 520rwhp; not too shabby for the street...
After I put up some times, I'll let you guys know what I put down at 38psi!!!
I've been driving it on the street all day. **** is plain nuts! Tranny is so loud, I need a advil, lol.....Gonna put a stock tranny in till summer, then swap back for racing.
Props to Ray Wilson for doing a great job and for putting up with me! lol..
New motor consists of 2mm cryro'ed apex seals, guru motorsports 2 piece e-shaft, 1/2" engine stud kit, and a large PFS street port.
Tranny is a PPG straight cut gear/dog box.
At 19psi it made 520rwhp; not too shabby for the street...
After I put up some times, I'll let you guys know what I put down at 38psi!!!
I've been driving it on the street all day. **** is plain nuts! Tranny is so loud, I need a advil, lol.....Gonna put a stock tranny in till summer, then swap back for racing.
Props to Ray Wilson for doing a great job and for putting up with me! lol..
#15
Thread Starter
Living life 9 seconds at a time
iTrader: (2)
Joined: Feb 2001
Posts: 6,541
Likes: 0
From: Abingdon, Md
Originally Posted by Bacon
OMG,
I was wondering why it was so warm out, Hell did freeze over LOL
I can’t wait to see that thing run down the track, And to see how deep into the 700’s you got @ 38psi. What did you set the redline up @.
I take it PPG is now making upgraded output shafts?
I was wondering why it was so warm out, Hell did freeze over LOL
I can’t wait to see that thing run down the track, And to see how deep into the 700’s you got @ 38psi. What did you set the redline up @.
I take it PPG is now making upgraded output shafts?
And yes, as a matter a fact, PPG is now making the stock output shaft. Mine should be here in about 3 weeks. If your interested in one, pm me. You can put it in a stock tranny so that will be nice for people that don't want to shell out $6500 for the full dog box.
#17
congrats on getting it back. sounds like a monster! are you putting it away soon? or is that just for us New Englanders? id love to see pictures after you get it back from the body shop.
#18
Thread Starter
Living life 9 seconds at a time
iTrader: (2)
Joined: Feb 2001
Posts: 6,541
Likes: 0
From: Abingdon, Md
Originally Posted by ZumspdRX-7
congrats on getting it back. sounds like a monster! are you putting it away soon? or is that just for us New Englanders? id love to see pictures after you get it back from the body shop.
#21
soon as spring comes and have some aux. injection i'll be making that sweet drive down to ray. i cant say how nice the guy is on the phone i can only imagine how great he must be in person. anyone wanna recommend a injection kit?
#22
Originally Posted by mono4lamar
soon as spring comes and have some aux. injection i'll be making that sweet drive down to ray. i cant say how nice the guy is on the phone i can only imagine how great he must be in person. anyone wanna recommend a injection kit?
Last edited by BLitzed33; 12-17-06 at 06:24 PM.
#23
Thread Starter
Living life 9 seconds at a time
iTrader: (2)
Joined: Feb 2001
Posts: 6,541
Likes: 0
From: Abingdon, Md
Originally Posted by mono4lamar
soon as spring comes and have some aux. injection i'll be making that sweet drive down to ray. i cant say how nice the guy is on the phone i can only imagine how great he must be in person. anyone wanna recommend a injection kit?