NE RX-7 Forum Serving ME, NH, VT, MA, RI, CT, NY, NJ, DE, PA, OH, WV, MD and VA

3/30 Dyno Day N.Y>

Thread Tools
 
Search this Thread
 
Old 02-27-08 | 10:08 PM
  #1  
Youngsity1986's Avatar
Thread Starter
Youngsity1986
 
Joined: Dec 2006
Posts: 82
Likes: 0
From: Northeast
NY 3/30 Dyno Day N.Y>

Since the last Dyno event in December I know a few guys here wanted to be on the Dyno and get tuned again. I live walking distance from this place so I went over there and spoke to the guy. I was able to get March 30th so hopefully the weather is a bit nicer then. So far everything is set for a min of 5 cars. If we get more he might be able to cut a better deal. The dyno is a Dynojet and it's in the ground.. no more going up ramps.. were allowed to drive our own cars. If you want to go just state whether or not you want pulls or a tune. I'm setting a cap for 15-20 dyno cars pending on what gets done. All cars are welcome. Pm me if theres any questions.



Place: Speedworld in Baldwin 598 Sunrise Hwy 11510
Date: March 30th
* = Dynoing Cars

For 3 pulls: $75

For Tuning: $125 p/hr


There are going to be a few supra's there so I nets some rotary's to represent


Pm me if anything. . .
Old 03-01-08 | 05:18 AM
  #2  
Youngsity1986's Avatar
Thread Starter
Youngsity1986
 
Joined: Dec 2006
Posts: 82
Likes: 0
From: Northeast
bump
Old 03-01-08 | 11:33 AM
  #3  
ALL IN's Avatar
Full Member

iTrader: (1)
 
Joined: Sep 2006
Posts: 202
Likes: 0
From: Eat Out
Why is everything on the 30th, lol.
Old 03-01-08 | 01:37 PM
  #4  
2wankel's Avatar
Strength & Unity
iTrader: (1)
 
Joined: Jul 2004
Posts: 1,946
Likes: 0
From: CT
CT

Originally Posted by ALL IN
Why is everything on the 30th, lol.
Well lets take a look…

A new CT club posts…
Dyno Day Sunday March 30, 2008 on 02-25-08, 09:58 AM

A day later this pops up…
Meeting @ palasades$ mall 3/30/08 on 02-26-08, 08:46 PM

That means that the first post was still somewhere around the top. So you would think that someone would have noticed a meet scheduled already that day.

Two days later a Dyno on the same day...
3/30 Dyno Day N.Y> 02-27-08, 10:08 PM

This goes deeper than what everyone on the NE forums sees. Lets just say we had a falling out with another club who is affiliated with a much, much larger club. Since we formed VMRC it seems that every move we make this said club counters it. I don’t know if the N.Y. Dyno Day is another attempt to counter our meet, but I can only go by the pattern that I observed since we formed our club. If this is just a coincidence than I appoligize, but I can only wonder why would anyone post a meet that is in the general area, on the same day, that another club has already publicly posted.

You be the judge.
Old 03-01-08 | 04:45 PM
  #5  
treceb's Avatar
Rotary Enthusiast
 
Joined: Jul 2001
Posts: 1,320
Likes: 1
From: Santurce
well lets see. you have a dyno day way out in CT. then someone from central/south jersey posts about a meet just across the jersey border in NY and then someone posts about a general, not rotary specific, dyno/tuning day in out in long island. and theres a tuning session on saturday the 29th in jersey. maybe its all just coincidence...

PS im in no way affiliated with nyra, njra or ctra.
PPS if i still had my 85 SE id join your club.
Old 03-01-08 | 04:57 PM
  #6  
GAMBEAN's Avatar
bi polar rotor loner
iTrader: (2)
 
Joined: Jun 2002
Posts: 527
Likes: 0
From: Orlando, Fl
I'll let some heads know around the way.
Old 03-01-08 | 05:20 PM
  #7  
chrism1's Avatar
rotary misfit at heart

 
Joined: Aug 2005
Posts: 1,055
Likes: 0
From: East Rutherford, NJ
OK I started the meet in the Palisades for the 30th and I have no idea who you are 2wankel....I have no beef with you nor do I want any so I dont understand what is going on....I have friends all across the area and I cant help it if they want to come to the meet I am planning.....I did not try to besmirch any of your people if that is what you are inferring
Old 03-01-08 | 05:34 PM
  #8  
chrism1's Avatar
rotary misfit at heart

 
Joined: Aug 2005
Posts: 1,055
Likes: 0
From: East Rutherford, NJ
not to mention your dates are incorrect my good man.....try 2/21 on mine so it seems you may have inadvertantly besmirched me some older rotarian attendee's

http://www.rx8club.com/showthread.php?t=2822
Old 03-01-08 | 06:25 PM
  #9  
2wankel's Avatar
Strength & Unity
iTrader: (1)
 
Joined: Jul 2004
Posts: 1,946
Likes: 0
From: CT
CT

Originally Posted by treceb
well lets see. you have a dyno day way out in CT. then someone from central/south jersey posts about a meet just across the jersey border in NY and then someone posts about a general, not rotary specific, dyno/tuning day in out in long island. and theres a tuning session on saturday the 29th in jersey. maybe its all just coincidence...

PS im in no way affiliated with nyra, njra or ctra.
PPS if i still had my 85 SE id join your club.
Hi treceb,

I know that everyone can't possibly keep track of other clubs dates and I realize that sometimes meets will happen at the same time. It's just a pattern that I've been seeing lately and its not just me other people have mentioned it to me, that is all.

Like I said before if its a coincidence than I appologize.
Old 03-01-08 | 06:40 PM
  #10  
2wankel's Avatar
Strength & Unity
iTrader: (1)
 
Joined: Jul 2004
Posts: 1,946
Likes: 0
From: CT
CT

Originally Posted by chrism1
not to mention your dates are incorrect my good man.....try 2/21 on mine so it seems you may have inadvertantly besmirched me some older rotarian attendee's

http://www.rx8club.com/showthread.php?t=2822

chrism1, I just answered the mans question and I also stated that if it was a coincidence than I appologize. So this beef thing I dont know where you got it from. I dont have beef with anyone, maybe people have beef with me for some unknown reason. Anybody that has met me knows that I'm a cool down to earth person.

I followed the link and read everything and from what I read the 21st there was no mention of it being official. You guys were talking about it. Just like we were talking about it with Elm City Imports and other various clubs way before the 21st. So to quote you, "you are incorrect my man."...

On 02-25-2008, 05:18 PM john64 posted...
"So this is def on for March 30th????"

Why was this question asked if it was already definate?


On 02-25-2008, 05:36 PM chrism1 posted...
"sounds like a plan in development"

A plan in developement is not saying its definate or official.


On 02-25-2008, 06:38 PM klepto posted...
"lets do it...why don't we start the official attendee list..."


On 02-25-2008, 07:12 PM chrism1 posted...
"pm the original poster and see if he will start a roll call!"


These posting does not sound like its was a definate meet.

This thread to me read as an official meet thread...
Meeting @ palasades$ mall 3/30/08on 02-26-08, 08:46 PM

I can also see that you edited your 02-21-2008, 12:45 PM post today (Last edited by chrism : 03-01-2008 at 04:59 PM.
) and added the link to this thread -----> Meeting @ palasades$ mall 3/30/08on 02-26-08, 08:46 PM

Why would you do that? It must be becuase it is the official thread and thats what I went with when I posted
or maybe I'm just a paranoid lunatic, ohh well.
Old 03-01-08 | 08:35 PM
  #11  
sc0rp7's Avatar
Rotary Adrenaline
iTrader: (3)
 
Joined: Dec 2004
Posts: 564
Likes: 4
From: Kennesaw, GA
WOW... thats all I can say... from what I know from here and there.... and the word goin round, you always seem to think that everyones out to get you... and your club... settle down, youre getting a little paranoid and egomaniacal... just my personal opinion there bud...

- Chris
Old 03-01-08 | 08:39 PM
  #12  
chiquirx7's Avatar
See you l@@king?
iTrader: (7)
 
Joined: Sep 2005
Posts: 2,335
Likes: 1
From: CT
and who ask you for your opinion
Old 03-01-08 | 09:03 PM
  #13  
chrism1's Avatar
rotary misfit at heart

 
Joined: Aug 2005
Posts: 1,055
Likes: 0
From: East Rutherford, NJ
i edit that post every day my friend with the updated list
Old 03-01-08 | 09:14 PM
  #14  
ALNY93R1's Avatar
Rotary Freak
iTrader: (12)
 
Joined: Mar 2002
Posts: 1,796
Likes: 1
From: New York
I don't get it, aren't we all supposed to have unity. This club , that club I personally don't give a **** as long as I could get together with a bunch of rotrorheads and have a great time.That's what it's all about, not a club competition.
Old 03-02-08 | 12:08 PM
  #15  
2wankel's Avatar
Strength & Unity
iTrader: (1)
 
Joined: Jul 2004
Posts: 1,946
Likes: 0
From: CT
CT

Originally Posted by sc0rp7
WOW... thats all I can say... from what I know from here and there.... and the word goin round, you always seem to think that everyones out to get you... and your club... settle down, youre getting a little paranoid and egomaniacal... just my personal opinion there bud...

- Chris
Originally Posted by ALNY93R1
I don't get it, aren't we all supposed to have unity. This club , that club I personally don't give a **** as long as I could get together with a bunch of rotrorheads and have a great time.That's what it's all about, not a club competition.

Well after what happened with the last club, lets say we dont trust them or their affiliation.

What can I say actions speak louder than words and it was already proven by their actions.

I'm also glad that you mention its not a club competition and I agree with you. We are an old school Mazda club 1985 and under. Yet we feel that their is competition for some unknown reason. It's not like we are tracking down members from 86 and up. We do let anyone hang out with us, but our members are only 1985 and under.
Old 03-02-08 | 12:11 PM
  #16  
2wankel's Avatar
Strength & Unity
iTrader: (1)
 
Joined: Jul 2004
Posts: 1,946
Likes: 0
From: CT
CT

Originally Posted by chrism1
i edit that post every day my friend with the updated list
My friend you claimed that you had your date for the 30th already set in stone on the 21st. I don't see any proof that you did. You can update your 21st thread all you want.
Old 03-02-08 | 12:58 PM
  #17  
chrism1's Avatar
rotary misfit at heart

 
Joined: Aug 2005
Posts: 1,055
Likes: 0
From: East Rutherford, NJ
ok so what i dont get is really what difference would it make?.....neither one of us knows each other and i already made it known that our meets have nothing to do with each other and neither do the dates.....are you a bit paranoid or something?......why do you kep going at me thinking im conspiring when i already said i wasnt?......wow and people say 8 owners have thier heads up thier asses and dont want to deal with others......your just proving its the other way around by alienating people....keep it up and you can have your half a dozen local owners...i can assure you with the attitude im getting i would never support anything you guys put out there
Old 03-02-08 | 01:29 PM
  #18  
2wankel's Avatar
Strength & Unity
iTrader: (1)
 
Joined: Jul 2004
Posts: 1,946
Likes: 0
From: CT
CT

Originally Posted by chrism1
ok so what i dont get is really what difference would it make?.....neither one of us knows each other and i already made it known that our meets have nothing to do with each other and neither do the dates.....are you a bit paranoid or something?......why do you kep going at me thinking im conspiring when i already said i wasnt?......wow and people say 8 owners have thier heads up thier asses and dont want to deal with others......your just proving its the other way around by alienating people....keep it up and you can have your half a dozen local owners...i can assure you with the attitude im getting i would never support anything you guys put out there
First off crism1 one, like I mentioned before. I was answering ALL INs question. You decided to post something directed at me. You felt you had to defend yourself. So you started the debate. You posted how you felt and I posted how I felt. Also whats this attitude you are talking about? I think I've been very respectful in stating my point of view. Are you saying I dont have the right to post my point of view.

I would rather have a half a dozen members who are real honest down to earth people. Than 100 shady people in our club.

I didn't ask you to support our club and now that you stated you won't that is fine with me. That is your opinion and I respect that. I realize that some people don't fit into certain clubs. Thats just how it is, you can't make everyone happy.

Lets just end it here.
Old 03-02-08 | 05:28 PM
  #19  
chrism1's Avatar
rotary misfit at heart

 
Joined: Aug 2005
Posts: 1,055
Likes: 0
From: East Rutherford, NJ
so in other words your saying the people i associate myself with are shady?....not cool...
Old 03-02-08 | 06:08 PM
  #20  
2wankel's Avatar
Strength & Unity
iTrader: (1)
 
Joined: Jul 2004
Posts: 1,946
Likes: 0
From: CT
CT

Originally Posted by chrism1
so in other words your saying the people i associate myself with are shady?....not cool...
If you want to interpret it in a negative way, thats on you. I haven't had the pleasure of meeting you, so I cannot comment on your character. Obviously from the second hand information you gathered, you have me all figured out.

Like I said before we don't need to go any further with this and this is my last post...

Good luck with your meet and make sure you post some pics for all to enjoy.
Old 03-02-08 | 06:53 PM
  #21  
ROTARYROCKET7's Avatar
Eats, Sleeps, Dreams Rotary
 
Joined: Jun 2005
Posts: 3,154
Likes: 1
From: Queens, NYC
yo ken i dunno whats going on with you but i thought you were more level headed then this. Just because someone in NY that is NOT affiliated with NYRA is holding a dyno day you jump to the conclusion that we are planning something against your club in CT?

I dont see the need for you to even post this up, your THREAD JACKING this guys post and you need to apologize for that, if you want to bash NYRA, NJRA, or CTRA then get some ******* ballz and make your own dedicated post stop starting ****.

This is all a big coicidence and you need to stop feeling like anyone is trying to attack you. John already told you we have no issues with your club or anyone in it, but if you incist on sparking beef to get promotion then that’s on you.

Now i will re-iterate, this dyno day was put together by a member of the rotary community for people in LI, NY and the tristate area, if its on the same date as yours what do you want the kid to do, stop his? NO

Stop acting like a child.

Also chrism is predominantly on the 8 forum and has been working on this meet way before yours did, so regardless of the date it was set mainly by the 8 members and then as a courtesy gesture he posted on 7club to get all of the rotary guys in one place who want to hang out. In no way shape or form did he attack you or plan to **** block your meet, so STOP THIS BULLSHIT!

If you want to be a man about it then come correct with the stuff, assumptions can get you into a lot of trouble.

Now i apologize to YOUNGSITY for this thread jacking.

So no one is after your meet in CT. Plus its a free country, there can be as many meets on the same day, it all depends on which one you want to attend. Goodluck.

PM me if you have any other concerns

EDIT: oh PS. just to let you know the NYRA meet schedule has been up for weeks, so if anyone has anything to say about our dates in the future here is a COPY. Also CTRA schedule is posted too!!!





Jason NYC

Last edited by ROTARYROCKET7; 03-02-08 at 07:16 PM.
Old 03-02-08 | 08:46 PM
  #22  
2wankel's Avatar
Strength & Unity
iTrader: (1)
 
Joined: Jul 2004
Posts: 1,946
Likes: 0
From: CT
CT

Originally Posted by ROTARYROCKET7
yo ken i dunno whats going on with you but i thought you were more level headed then this. Just because someone in NY that is NOT affiliated with NYRA is holding a dyno day you jump to the conclusion that we are planning something against your club in CT?

I dont see the need for you to even post this up, your THREAD JACKING this guys post and you need to apologize for that, if you want to bash NYRA, NJRA, or CTRA then get some ******* ballz and make your own dedicated post stop starting ****.

This is all a big coicidence and you need to stop feeling like anyone is trying to attack you. John already told you we have no issues with your club or anyone in it, but if you incist on sparking beef to get promotion then that’s on you.

Now i will re-iterate, this dyno day was put together by a member of the rotary community for people in LI, NY and the tristate area, if its on the same date as yours what do you want the kid to do, stop his? NO

Stop acting like a child.

Also chrism is predominantly on the 8 forum and has been working on this meet way before yours did, so regardless of the date it was set mainly by the 8 members and then as a courtesy gesture he posted on 7club to get all of the rotary guys in one place who want to hang out. In no way shape or form did he attack you or plan to **** block your meet, so STOP THIS BULLSHIT!

If you want to be a man about it then come correct with the stuff, assumptions can get you into a lot of trouble.

Now i apologize to YOUNGSITY for this thread jacking.

So no one is after your meet in CT. Plus its a free country, there can be as many meets on the same day, it all depends on which one you want to attend. Goodluck.

PM me if you have any other concerns

EDIT: oh PS. just to let you know the NYRA meet schedule has been up for weeks, so if anyone has anything to say about our dates in the future here is a COPY. Also CTRA schedule is posted too!!

Jason NYC

Now, before you started flapping your gums, you should have read the entire post, thats all you have to do. It is a simple thing, I know you went to college. It's not hard!!!!


I answered ALL INs question, maybe I was wrong to do that maybe I wasn't. But you did mention its a free country so I guess I'm not wrong in answering ALL IN's question. I was just giving him the gist of what may be going on. So if you feel that you have to come in here and defend yourself than maybe I'm right. Especially since I didnt even mention CTRA or NYRA.


Again for 939392 time I also stated this in the same post..."If this is just a coincidence than I appoligize." but apparently you HAVEN'T READ THE ENTIRE POST and it seems you want to start something especially since I TRIED TO END THIS THREAD ON A POSITIVE NOTE.


If you dont like to read than here is a condensed version of some of the things I stated in this thread...

"If this is just a coincidence than I appoligize..."

"I know that everyone can't possibly keep track of other clubs dates and I realize that sometimes meets will happen at the same time."

"Like I said before if its a coincidence than I appologize."

"I'm also glad that you mention its not a club competition and I agree with you."

"Good luck with your meet and make sure you post some pics for all to enjoy."




Also you are already too late apparently YOUNGSITY had two of the same threads and I bumped it up with an appology before you posted. Wow look here. Why dont you do some research before you come in here and stir things up. Again after I TRIED TO END THIS THREAD ON A POSITIVE NOTE.



As a matter of fact who are you to dictate (THE VERY REASON WHY MEMBERS LEFT) what I should do OR not do on the forum. Thats what we have moderators for!! If your looking for a job as a moderator than ask them. I've been nice and cordial in my posts and here you are coming in here like a big man and being vulgar at that. Didn't college teach you how to express yourself without being vulgar? Aren't you a leader in the rotary community? You should be ashamed of yourself. Leaders dont swear or attack someone's opinion. They talk it out and try to come to a resolution.

You need to work on that.
Old 03-02-08 | 10:07 PM
  #23  
sc0rp7's Avatar
Rotary Adrenaline
iTrader: (3)
 
Joined: Dec 2004
Posts: 564
Likes: 4
From: Kennesaw, GA
Ya know what bro? If you said you apologize if it was coincidence, then I think it would be safe to assume that it was a coincidence, judging by all of the posts in this thread, which got completely jacked into a bogus *** set of accusations... so, sit back and quit accusing people... do your own thing, and just act like every other one of us "shady" (as you so elegantly put it) people dont exist, as well as our threads... Have a nice life. deuces

- Chris


P. S. - I do honestly apologize to the original poster whos thread was tainted by all of this bull. I am not gonna even post in your other thread that was made, so it doesnt get cluttered similarly. Good luck on your dyno day, and maybe after my TII is running I'll show if you have another one.

Last edited by sc0rp7; 03-02-08 at 10:15 PM. Reason: OP apology
Old 03-02-08 | 10:42 PM
  #24  
chiquirx7's Avatar
See you l@@king?
iTrader: (7)
 
Joined: Sep 2005
Posts: 2,335
Likes: 1
From: CT
Originally Posted by ROTARYROCKET7
yo ken i dunno whats going on with you but i thought you were more level headed then this. Just because someone in NY that is NOT affiliated with NYRA is holding a dyno day you jump to the conclusion that we are planning something against your club in CT?

I dont see the need for you to even post this up, your THREAD JACKING this guys post and you need to apologize for that, if you want to bash NYRA, NJRA, or CTRA then get some ******* ballz and make your own dedicated post stop starting ****.

This is all a big coicidence and you need to stop feeling like anyone is trying to attack you. John already told you we have no issues with your club or anyone in it, but if you incist on sparking beef to get promotion then that’s on you.

Now i will re-iterate, this dyno day was put together by a member of the rotary community for people in LI, NY and the tristate area, if its on the same date as yours what do you want the kid to do, stop his? NO

Stop acting like a child.

Also chrism is predominantly on the 8 forum and has been working on this meet way before yours did, so regardless of the date it was set mainly by the 8 members and then as a courtesy gesture he posted on 7club to get all of the rotary guys in one place who want to hang out. In no way shape or form did he attack you or plan to **** block your meet, so STOP THIS BULLSHIT!

If you want to be a man about it then come correct with the stuff, assumptions can get you into a lot of trouble.

Now i apologize to YOUNGSITY for this thread jacking.

So no one is after your meet in CT. Plus its a free country, there can be as many meets on the same day, it all depends on which one you want to attend. Goodluck.

PM me if you have any other concerns

EDIT: oh PS. just to let you know the NYRA meet schedule has been up for weeks, so if anyone has anything to say about our dates in the future here is a COPY. Also CTRA schedule is posted too!!!





Jason NYC
Who died and made you moderator? What is it you cannot banned any one from this forum!
Old 03-03-08 | 06:44 AM
  #25  
chrism1's Avatar
rotary misfit at heart

 
Joined: Aug 2005
Posts: 1,055
Likes: 0
From: East Rutherford, NJ
wow this is so highschool...and here i thought most of us were adults



All times are GMT -5. The time now is 09:27 PM.