Ft Wayne IN Rotor social club's next meet
#1202
Banned. I got OWNED!!!
Join Date: May 2004
Location: Decatur, Indiana
Posts: 1,968
Likes: 0
Received 0 Likes
on
0 Posts
its kool, i just finally got everything back together. still need a few misc parts.
"ANYONE GOT A SET OF STOCK MOTOR MOUNT, S4 ALTERNATOR, OR MAIN ESHAFT PULLEY"
need this to finish up the car. Then it will be ready for ya Derek!!!!!
"ANYONE GOT A SET OF STOCK MOTOR MOUNT, S4 ALTERNATOR, OR MAIN ESHAFT PULLEY"
need this to finish up the car. Then it will be ready for ya Derek!!!!!
#1206
Mad Man
iTrader: (5)
Does anyone have any of the following
rotor housing's (good shape NA or turbo little to no chrome flaking)
S5 NA flywheel
S5 NA counter weight
Also just a note I have powdercoat setup now and will be able to do any part that can fit into a standard size oven. PM and I can let you know on pricing.
Chuck,
Did you guys already go get your tires from Indy??
rotor housing's (good shape NA or turbo little to no chrome flaking)
S5 NA flywheel
S5 NA counter weight
Also just a note I have powdercoat setup now and will be able to do any part that can fit into a standard size oven. PM and I can let you know on pricing.
Chuck,
Did you guys already go get your tires from Indy??
#1207
0000-09-0233
Join Date: Jun 2003
Location: Fort Wankel
Posts: 1,317
Likes: 0
Received 0 Likes
on
0 Posts
Ryan,
change of plans on the Indy thing... YAAAY!!!!!
actually way easier... dealing locally!!!! and prices are a bit cheaper!!
um, I have the S5 front C-weights, and Rear flywheel.. I'll dig them out tomorrow if you want them...
oh, yeah.. you aren't going to powder coat any rotor housings are you????
change of plans on the Indy thing... YAAAY!!!!!
actually way easier... dealing locally!!!! and prices are a bit cheaper!!
um, I have the S5 front C-weights, and Rear flywheel.. I'll dig them out tomorrow if you want them...
oh, yeah.. you aren't going to powder coat any rotor housings are you????
#1209
0000-09-0233
Join Date: Jun 2003
Location: Fort Wankel
Posts: 1,317
Likes: 0
Received 0 Likes
on
0 Posts
Originally Posted by fritts
Not unless they are used for displays (clocks, lamps). I actually have a bad rotor powdercoated sitting at my desk.
Who do we talk to on pricing now?
still wanting the RS-2's in the sizes below. The Kuhmo's are just a bit to large from the looks of it.
265/35R18
235/40R18
Who do we talk to on pricing now?
still wanting the RS-2's in the sizes below. The Kuhmo's are just a bit to large from the looks of it.
265/35R18
235/40R18
(I just mounted a set tuesday night.. onto a set of 8.5" Ray's wheel.. oh, so gorgeous..)
I'll check into the 265... for the front..
and uh.. post the pricing here later....
then from there.. I'll PM you the contact name / number..
not doing it here.. publicly.. because I/my dude.. is not a vendor.. and we're really just trying to help locals anyway.. no-matter what they drive.
that being said, if anyone needs tires, locally.. (fort wayne... surrounding areas.. etc.. ) PM me...
#1210
New Member
Hey guys. I am new to RX-7 club and live in the Fort. I was wondering if any of you knew of anyone looking for an engine and trany? I have a 93 that I am going to be puting a V8 in and no longer need the twin turbo motor nor trany. Also, does any one have an parts for a 93-95? Thanks for your time!
Josh
Josh
#1212
Mad Man
iTrader: (5)
I would give Banzai Racing a call if you can't find an individual locally. He might be able to use them.
Originally Posted by silver_rx-7_1993
Hey guys. I am new to RX-7 club and live in the Fort. I was wondering if any of you knew of anyone looking for an engine and trany? I have a 93 that I am going to be puting a V8 in and no longer need the twin turbo motor nor trany. Also, does any one have an parts for a 93-95? Thanks for your time!
Josh
Josh
#1214
The motor and trany have around 62,000 miles. I have been watching them on ebay go for around $2,000, but I will take any good offer! I thought that I would do $1,500 or best offer!
#1215
Are any of you from Fort Wayne? If so did you ever hang out at Hires or the old pepboys? I have a maroon 1993 Ford Mustang Cobra, and had a 4 door orange Ford Focus. I am in the process of building a new motor for the cobra and have the old one sitting in the shop. The Cobra made 628hp at the wheels so I thought that would be nice in my rx-7. But I have only found swaps for a ford motor for the 1st and 2nd gen cars!
#1217
I know there is probably a way to get that ford motor into an FD. Personally I have usually only seen (like you said 5.0 fb's and FC's) but you could check with hinson and grannys to see if they offer a cradle for your particular application. Also, check in with us at v8rx7forum.com.
Mmmm, I think there will now be like 3 or 4 LS1 RX-7's running around the Fort soon. Sweet.
Mmmm, I think there will now be like 3 or 4 LS1 RX-7's running around the Fort soon. Sweet.
#1219
Junior Member
Join Date: Mar 2007
Location: Fort Wayne I.N.
Posts: 12
Likes: 0
Received 0 Likes
on
0 Posts
Originally Posted by Azar
I know there is probably a way to get that ford motor into an FD. Personally I have usually only seen (like you said 5.0 fb's and FC's) but you could check with hinson and grannys to see if they offer a cradle for your particular application. Also, check in with us at v8rx7forum.com.
Mmmm, I think there will now be like 3 or 4 LS1 RX-7's running around the Fort soon. Sweet.
Mmmm, I think there will now be like 3 or 4 LS1 RX-7's running around the Fort soon. Sweet.
Maybe even More!!!!!
#1222
Originally Posted by rob81gsl
to many v8's im starting to go crazy over here!!! i'll put the challenge down now. my ROTARTY FC will be up and running soon, try and keep up....haha
#1223
Junior Member
Join Date: Mar 2007
Location: Fort Wayne I.N.
Posts: 12
Likes: 0
Received 0 Likes
on
0 Posts
If i can make over 500 hp all day on my little turbo bikes think what can make with a rx7
Last edited by Shamrock Racing; 03-24-07 at 09:05 AM. Reason: spelling
#1225
^^rotard for life^^
iTrader: (3)
Join Date: Sep 2004
Location: Orlando
Posts: 906
Likes: 0
Received 0 Likes
on
0 Posts
yeah its my new track car. will be somewhere around 400-450 HP at 2200 to 2400 lbs with me in the car. do the math it will be fast and fun!!! i'm working on building the turbo manifold and v-mount radiator/intercooler setup as well as we speak. i'll get some pics on here eventually