Ft Wayne IN Rotor social club's next meet
#3901
burn to burn
iTrader: (3)
yea im a big fanboy lmao what exactly am i a fan of? get with it, the way it sounds, if anyone here is.. it's you poorboy for good ol blake here. i know he needs all the support he can get but damn.
infer is basically a partly educated guess, still a conclusion based on an assumption.
pretty sure its in the definition
the process of deriving the strict logical consequences of assumed premises.
http://dictionary.reference.com/browse/inference
so i like to cause problems yet you couldn't care less and it doesn't bother you.. sounds like one of your typical contradictions to me.
Yea enough bs even I reach my annual limit. You make it seem like im putting in some real effort in here and you need to speak for yourself because there are a lot of people on here who know me at least somewhat, if you knew me which you don’t, you would see the whole iceberg not just this tip, but I can’t blame you that’s kind of intentional on my part. I don't measure my knowledge against others and haven't even attempted to because it’s not my job to educate others. Infact if you ask anyone who knows me closely they’ll all tell you I don’t hand out knowledge very often. When you work for what you know i don’t see the point in giving it away. if i wanted to do that I’d be a professor and be getting paid to do it. As for the community college bs yea i tried one out for a year after graduating from a university but i don't see what that has to do with anything. Don’t mistake disrespect with being upset. I was never upset with you. All I thought when overhearing you was ok another ignorant guy, not my problem ill never hear from him anyway. And if anything it was humorous. But ill go ahead and give you the benefit of the doubt and assume you were bullshitting even though it didn’t seem like it. Infact the other keith even said you were a pretty cool guy to hang out with and he’s one of my best friends. Ya I do stir up **** on purpose to liven it up in here and a lot of what I said, as I said before, was just bsing. Like the whole dyno queen comment. Take that as you will.
infer is basically a partly educated guess, still a conclusion based on an assumption.
pretty sure its in the definition
the process of deriving the strict logical consequences of assumed premises.
http://dictionary.reference.com/browse/inference
so i like to cause problems yet you couldn't care less and it doesn't bother you.. sounds like one of your typical contradictions to me.
Yea enough bs even I reach my annual limit. You make it seem like im putting in some real effort in here and you need to speak for yourself because there are a lot of people on here who know me at least somewhat, if you knew me which you don’t, you would see the whole iceberg not just this tip, but I can’t blame you that’s kind of intentional on my part. I don't measure my knowledge against others and haven't even attempted to because it’s not my job to educate others. Infact if you ask anyone who knows me closely they’ll all tell you I don’t hand out knowledge very often. When you work for what you know i don’t see the point in giving it away. if i wanted to do that I’d be a professor and be getting paid to do it. As for the community college bs yea i tried one out for a year after graduating from a university but i don't see what that has to do with anything. Don’t mistake disrespect with being upset. I was never upset with you. All I thought when overhearing you was ok another ignorant guy, not my problem ill never hear from him anyway. And if anything it was humorous. But ill go ahead and give you the benefit of the doubt and assume you were bullshitting even though it didn’t seem like it. Infact the other keith even said you were a pretty cool guy to hang out with and he’s one of my best friends. Ya I do stir up **** on purpose to liven it up in here and a lot of what I said, as I said before, was just bsing. Like the whole dyno queen comment. Take that as you will.
#3902
RX-347
iTrader: (2)
Keith,
2 things. 1. Inference is similar to assumption, but requires more strict knowledge of the subject at hand. Not above reproach, but more stringent in its requirements vs. a simple assumption, which has no requirement of knowledge on the subject.
2. I really, honestly have no problem with you at all. You keep giving me **** on here, so I'll give it back. Just like the other Keith who gave me **** on here a while back, I was happy to give him some free parts when he needed some, and like most people I've met, he was a cool guy in person. You're not even close to doing anything that merits me taking issue with you, life is way to short to get stressed out about what other people think. There is a big difference between throwing someone flack on the internet and harboring some kind of valid malice towards them.
Also, don't mistake me joking around and talking **** as the maximum of my intellectual capability. I'm often accused of lacking a (fairly large) bit in humility, but I don't lack in intelligence. You're welcome to believe me or not, I don't think it'll negatively impact my existence any if you think I'm an idiot, I still know better. FWIW, you don't come across as a fool (you're well spoken) though I get the feeling that you haven't spent a lot of time in law or debate classes. :P
And I'm 100% with you stirring up **** to liven it up. The entertainment value of some random fecal slinging keeps this thread alive, hahaha.
edit: And one last thing. I post pictures of my car because I enjoy seeing pictures of other people's work. I find that the collective capability of everyone is much larger than my own, and the best place to look for ideas is to see what others have already done. There aren't many new ideas, just adjustments of existing ones. Honestly, I'd rather more people posted up pictures and ideas of what they were working on. Past responses here and elsewhere would support my opinion that others share this view. My .02.
2 things. 1. Inference is similar to assumption, but requires more strict knowledge of the subject at hand. Not above reproach, but more stringent in its requirements vs. a simple assumption, which has no requirement of knowledge on the subject.
2. I really, honestly have no problem with you at all. You keep giving me **** on here, so I'll give it back. Just like the other Keith who gave me **** on here a while back, I was happy to give him some free parts when he needed some, and like most people I've met, he was a cool guy in person. You're not even close to doing anything that merits me taking issue with you, life is way to short to get stressed out about what other people think. There is a big difference between throwing someone flack on the internet and harboring some kind of valid malice towards them.
Also, don't mistake me joking around and talking **** as the maximum of my intellectual capability. I'm often accused of lacking a (fairly large) bit in humility, but I don't lack in intelligence. You're welcome to believe me or not, I don't think it'll negatively impact my existence any if you think I'm an idiot, I still know better. FWIW, you don't come across as a fool (you're well spoken) though I get the feeling that you haven't spent a lot of time in law or debate classes. :P
And I'm 100% with you stirring up **** to liven it up. The entertainment value of some random fecal slinging keeps this thread alive, hahaha.
edit: And one last thing. I post pictures of my car because I enjoy seeing pictures of other people's work. I find that the collective capability of everyone is much larger than my own, and the best place to look for ideas is to see what others have already done. There aren't many new ideas, just adjustments of existing ones. Honestly, I'd rather more people posted up pictures and ideas of what they were working on. Past responses here and elsewhere would support my opinion that others share this view. My .02.
#3903
burn to burn
iTrader: (3)
I agree with it all.
Hell no this is no measure of anyones intelligence, but i don't have to see your 100% to know you're on an ENTIRE different level than the guy down the road asking me what it would take to put a diesel in his trans am or the guy that tells me he honed his 98 dodge neon out to 3.4 liters. or the guy -the reason i despise dsm owners- who took a wire wheel to his talons cylinder walls to hone them out. it takes skill and knowledge to do the work you posted and it cant be faked.
I confess, I have not taken any of those classes ha
I might post a pic or 2...
Hell no this is no measure of anyones intelligence, but i don't have to see your 100% to know you're on an ENTIRE different level than the guy down the road asking me what it would take to put a diesel in his trans am or the guy that tells me he honed his 98 dodge neon out to 3.4 liters. or the guy -the reason i despise dsm owners- who took a wire wheel to his talons cylinder walls to hone them out. it takes skill and knowledge to do the work you posted and it cant be faked.
I confess, I have not taken any of those classes ha
I might post a pic or 2...
#3907
Lives on the Forum
Michigan News:
Dream Cruise/Autocross (Grand Rapids)
--------------------------------------------------------------------------------
The Grand Rapids Metro Cruise will take place the weekend following Detroit's Dream Cruise. The two events are very similar, but the GR event tends to be less crowded (= less time stuck in traffic). August 26th - 28th.
Our local club, Furrin Group, is also planning to have autocross races Friday and Saturday nights as part of the festivities. The lot we are looking at has great visibility, and is right on the main cruise route. This will be a Charity event, with passengers paying for rides during the race.
If anyone is coming from out of town, and would like to camp at my place, just let me know. My place is about 3 blocks from the cruise route, and my back yard is like a private park (very nice for camping).
I may try to organize a BBQ or something over the weekend as well as part of a Rotary Meet, depending on interest.
http://www.myautoevents.com/pls/mae/...event_id=11862
.
Dream Cruise/Autocross (Grand Rapids)
--------------------------------------------------------------------------------
The Grand Rapids Metro Cruise will take place the weekend following Detroit's Dream Cruise. The two events are very similar, but the GR event tends to be less crowded (= less time stuck in traffic). August 26th - 28th.
Our local club, Furrin Group, is also planning to have autocross races Friday and Saturday nights as part of the festivities. The lot we are looking at has great visibility, and is right on the main cruise route. This will be a Charity event, with passengers paying for rides during the race.
If anyone is coming from out of town, and would like to camp at my place, just let me know. My place is about 3 blocks from the cruise route, and my back yard is like a private park (very nice for camping).
I may try to organize a BBQ or something over the weekend as well as part of a Rotary Meet, depending on interest.
http://www.myautoevents.com/pls/mae/...event_id=11862
.
Last edited by Kentetsu; 08-19-11 at 10:43 AM. Reason: Fixed link
#3908
Senior Member
iTrader: (5)
Join Date: Jan 2010
Location: Ft. Wayne
Posts: 565
Likes: 0
Received 0 Likes
on
0 Posts
keithrulz and digitalsolo thats cute that you guys made up. If you want me and my lady friend are looking for a couple to double date with if you are't to busy giving each other handies. lol
#3917
aka The BeasTT
iTrader: (5)
Join Date: Sep 2008
Location: Ft. Wayne, IN
Posts: 313
Likes: 0
Received 0 Likes
on
0 Posts
They don't have a load baring dyno either. Talk to Bryce and see if you can't get access to the dyno at the tech school in K-ville or I plan on using the dyno at RPM in Anderson
#3918
Movie Star
iTrader: (11)
Join Date: Dec 2003
Location: Fort Wayne, Indiana
Posts: 982
Likes: 0
Received 0 Likes
on
0 Posts
I tuned for drivability already, so I wont need the load bearing dyno anymore.
The inertia dyno will suffice for boost runs since I'm just going to do sweeps.
My engine's too fragile to tune cell by cell if I'm boosting.
On a side note:
NGK wideband FTW.
I literally just got home from tuning boost cells, so I might just skip the dyno and go straight to the track.
I've gotta lean it out a little more up top, but I can do that another day...it's too freakin hot.
The inertia dyno will suffice for boost runs since I'm just going to do sweeps.
My engine's too fragile to tune cell by cell if I'm boosting.
On a side note:
NGK wideband FTW.
I literally just got home from tuning boost cells, so I might just skip the dyno and go straight to the track.
I've gotta lean it out a little more up top, but I can do that another day...it's too freakin hot.
#3919
Movie Star
iTrader: (11)
Join Date: Dec 2003
Location: Fort Wayne, Indiana
Posts: 982
Likes: 0
Received 0 Likes
on
0 Posts
My buddy Chris is renting out Muncie the 21st of this month.
$35 per car.
9am-4pm plus free pass to test and tune that evening.
Grudge racing (no clock) can be set up for your car if you prefer.
Raincheck is the week after.
I'll be there.
This can be our "social meet."...not some boring ***, ******* marinating, parking lot prowling session.
We actually get to drive our cars rather than standing around talking about why Hermoine Granger doesn't hook up with Harry rather than Ron.
The soul-less ginger, that has no skills or game.
And how Harry needs to dump that ugly *** firecrotch Ginny and stick his magic stick in something worthy of "the chosen one."
anyways...
(260)750-3242
~Tony Magnum
Holla at a playa if you guys want to make/hang out and race.
$35 per car.
9am-4pm plus free pass to test and tune that evening.
Grudge racing (no clock) can be set up for your car if you prefer.
Raincheck is the week after.
I'll be there.
This can be our "social meet."...not some boring ***, ******* marinating, parking lot prowling session.
We actually get to drive our cars rather than standing around talking about why Hermoine Granger doesn't hook up with Harry rather than Ron.
The soul-less ginger, that has no skills or game.
And how Harry needs to dump that ugly *** firecrotch Ginny and stick his magic stick in something worthy of "the chosen one."
anyways...
(260)750-3242
~Tony Magnum
Holla at a playa if you guys want to make/hang out and race.
#3923
It means 12A all ways^
iTrader: (20)
Join Date: Jul 2008
Location: Northern IN
Posts: 769
Likes: 0
Received 0 Likes
on
0 Posts
Yeah the CrosRocket is up and running like a bad ***.... Buuut we were out beating on all day the other day and my dad got a little crazy with it and ended up in a ditch taking out a barb wire fence.
Took some front damage and other dings here and there but its still running and driving fine. So looks like its a winter body work project. Lol
Took some front damage and other dings here and there but its still running and driving fine. So looks like its a winter body work project. Lol
#3925
It means 12A all ways^
iTrader: (20)
Join Date: Jul 2008
Location: Northern IN
Posts: 769
Likes: 0
Received 0 Likes
on
0 Posts
No vids unfortunately. Im the guy that usually makes the vids and I was the one driving most of the time... But its all good, no one got hurt.
I wish I did make a vid of it cause seeing that little car going down the road with the scream of that R1 engine is pretty sweet.
I wish I did make a vid of it cause seeing that little car going down the road with the scream of that R1 engine is pretty sweet.