Ft Wayne IN Rotor social club's next meet
09-03-09, 11:00 PM
#2851
The Claps
Join Date: May 2007
Location: Vivvid Studio
Posts: 55
Likes: 0
Received 0 Likes
on
0 Posts
Nope, I switched back to 93 after the whole ignition ordeal.
I honestly think it's around 420-450rwhp as it sits.
It's running really fat so I can do these highway pulls with the v8s and bikes.
Last time I corner weighted it was sitting at a hefty 2820 without me in it, so I'd really benefit from that.
I'm just too lazy.
lol...
Fenders are NOT rolled. If they were rolled, I don't think they'd rub.
You'll see them tomorrow.
DO IT!!!!!
so you should be making over 500hp E85 right??I honestly think it's around 420-450rwhp as it sits.
It's running really fat so I can do these highway pulls with the v8s and bikes.
I'm just too lazy.
Where exactly are they close to rubbing at? From my measurements it looks like it would be the closest to rubbing width wise (on the shock or trailing arm), not so much height. But then again I am mildly retarded and easily distracted by shiney things. Are your fenders rolled?
Fenders are NOT rolled. If they were rolled, I don't think they'd rub.
You'll see them tomorrow.
DO IT!!!!!
09-04-09, 08:35 AM
#2852
hey man, i've been looking at an HKS T78 kit. what rpm does (or did) it spool up at? still debating on which kit to go with and if the 78 lags too much i'll go with something else
09-04-09, 09:52 AM
#2853
^^rotard for life^^
iTrader: (3)
Join Date: Sep 2004
Location: Orlando
Posts: 906
Likes: 0
Received 0 Likes
on
0 Posts
what a/r? as long as your not running something tiny and choking it you should be at least up where im at in hp. fd plates and intakes flow way better than the t2 stuff im using. i was trying to look up specs on the turbo and i think its actually sized pretty close to what im using right now. the 4082 that im using has a small compressor wheel, which i believe yours does too so we should be in similar power ranges.
and 2800lbs
we gotta fix that.... my fc is can get down to around 2300 with out me in it with a cage. so i have a saw, cut off wheels, and a desire to do some cutting so lets make your car light!!!!
and 2800lbs
we gotta fix that.... my fc is can get down to around 2300 with out me in it with a cage. so i have a saw, cut off wheels, and a desire to do some cutting so lets make your car light!!!!
09-04-09, 09:55 AM
#2854
^^rotard for life^^
iTrader: (3)
Join Date: Sep 2004
Location: Orlando
Posts: 906
Likes: 0
Received 0 Likes
on
0 Posts
where you guys hang out on fridays nights? over there by carlos o kellys stilll and when you roll in, wouldnt mind coming and shooting the proverbial rotary ****.....
09-04-09, 07:55 PM
#2856
Movie Star
iTrader: (11)
Join Date: Dec 2003
Location: Fort Wayne, Indiana
Posts: 982
Likes: 0
Received 0 Likes
on
0 Posts
If you're concerned about spool, I'd recommend a smaller turbo and/or ball bearing.
You should consult with who ever is going to tune your car.
It will make everything go a lot smoother.
I won't be out there till midnight.
Text me.
09-04-09, 11:33 PM
#2857
Are you looking for a running FB, or a shell to do a swap in? If it is the shell you need, pm me. Mine is about to go up for sale officially soon.
09-07-09, 01:24 AM
#2863
Junior Member
Join Date: Jul 2009
Location: laotto in
Posts: 20
Likes: 0
Received 0 Likes
on
0 Posts
hey whats up everyone just wondered when you guys were getting together again though it would be cool to hang out with some people with rx7's never really done the club thing but its always cool to check out cool cars and bull **** so let me know
09-07-09, 07:39 PM
#2865
Is there anybody out there who can paint with OK equipment. My challenger needs a decent layer and I suck, we could make a day/night of it, my property can take a lot of people, open fire, bbq, beer, who can help.
The Grassroots Challenge is in 4 weeks, car is almost ready except decent paint.
The Grassroots Challenge is in 4 weeks, car is almost ready except decent paint.
09-08-09, 09:56 AM
#2867
Fort Wayne Circle Track Supply has methanol CHEAP... but require you to buy in in bulk. Last I called they had 55 gallon drums for 120 bucks. ~2 bucks/gallon ain't bad. 
Beast's car fired up yesterday night. Still have a lot of work to do, but it's good progress. My car is getting close to where I'm happy with it. Still have some electrical to sort out and I want to put it up in the air this winter and straighten/reinforce the "frame rails" underneath since the previous owner smashed them nicely.
Beast's car fired up yesterday night. Still have a lot of work to do, but it's good progress. My car is getting close to where I'm happy with it. Still have some electrical to sort out and I want to put it up in the air this winter and straighten/reinforce the "frame rails" underneath since the previous owner smashed them nicely.
09-08-09, 01:59 PM
#2869
The Claps
Join Date: May 2007
Location: Vivvid Studio
Posts: 55
Likes: 0
Received 0 Likes
on
0 Posts
09-09-09, 02:16 PM
#2870
Movie Star
iTrader: (11)
Join Date: Dec 2003
Location: Fort Wayne, Indiana
Posts: 982
Likes: 0
Received 0 Likes
on
0 Posts
So Franky Fresh pmed me on fortwayneracing and said that he's willing to race this saturday.
He says that he was just at the track and trapped 121mph.
That's quick....seriously.
I'm looking forward to it.
He says that he was just at the track and trapped 121mph.
That's quick....seriously.
I'm looking forward to it.
09-10-09, 01:23 PM
#2874
The Claps
Join Date: May 2007
Location: Vivvid Studio
Posts: 55
Likes: 0
Received 0 Likes
on
0 Posts
a car door, a set of golf clubs, a bowling ball, and a dead hooker?
That's what was all in there last time we went racing.
We'll figure out who you'll line up with once we're out there.