Midwest RX-7 Forum Serving KY, IN, IL, MO, MI, WI, IA, MN, ND, SD, NE, KS

**STEVE KAN TUNING IN ST.LOUIS**March29th-30th 2008**Car Show**Strippers**

Thread Tools
 
Search this Thread
 
Old 10-02-07 | 03:00 PM
  #1  
Viking War Hammer's Avatar
Thread Starter
*** Bless The USA
iTrader: (8)
 
Joined: Jan 2007
Posts: 7,140
Likes: 0
From: Saint Louis / Illinois
**STEVE KAN TUNING IN ST.LOUIS**March29th-30th 2008**Car Show**Strippers**

Steve Kan Tuning Information

Steve Kan will be in St.Louis from March 21th to March 24th. He'll be tuning on the 22-23 which falls on a saturday and sunday. His rate is $350 for a basic tune which requires a deposit of $200. Listed below is the pricing structure for custom tunes.

$350 - Stock turbo up to 12psi of boost (pump gas only) 1 map
$400 - Aftermarket turbo up to 16psi of boost (pump gas only) 1 map
$450 - Aftermarket turbo from 16psi - 25psi of boost (race gas and/or auxiliary injection only) 1 map
$600 - aftermarket turbo up to 25psi of boost (pump gas and race gas tune) 2 maps

Deposits can be sent to my address. I'll hand the deposits over to Steve when he arrives.

(Make checks out to Steve Kan)

Eric Cheatham
11 Lincolnshire BLVD
Belleville IL, 62221

__________________________________________________ ______________


Tuning list:

1. Bob Willis (Deposit Recieved)
2. Manvero (Deposit Received)
3. Juiceh (Deposit Received)
4. Viking **** Hammer (Deposit Received)



DYNO INFORMATION

Dyno time is $85/Hr

Tuxedo Park Racing is located in the same building as Penthouse Club.

Address is:

Tuxedo Park Racing
1401 Mississippi Ave
Bay #3
East St. Louis IL, 62201


Here is what they will offer us:

1. Two mechanics.
2. We will have access to all of his facilities for the weekend.
3. Intercomp scales will be available for corner weights.
4. A Lift and tools will be available incase a problem were to arise.
5. Fabrication/Machine shop/Welding is available in case it’s needed.
6. Brand new Dynopack 3000 w/wideband and boost transducer.

Dyno List: (Dyno at Tuxedo Park Racing)

1. Bob Willis
2. Manvero
3. Juiceh
4. Viking **** Hammer


__________________________________________________ ______________

Everyone needs to make a checklist before Steve Kan arrives. This is what he said in an earlier post.

"Here're some items to inspect/replace before the dyno. New plugs (less than 1k miiles), new fuel filter (less than 5k miles), inspect spark plug wires, oil change, full tank of whatever gas you normally run, inspect tires (no nails or anything that can fly out during the dyno), inspect coolant fluid (change if necessary), clean air filter, put all the mods in that you plan to run before coming to the dyno (I don't think there'll be enough time to install them on the same day)."


If you want to be added to the list, please let me know asap.
Old 10-02-07 | 03:19 PM
  #2  
Juiceh's Avatar
Saiga-12 Power!
iTrader: (4)
 
Joined: Oct 2004
Posts: 4,384
Likes: 0
From: N of Chicago
What happened to Feb?
Old 10-02-07 | 03:23 PM
  #3  
Viking War Hammer's Avatar
Thread Starter
*** Bless The USA
iTrader: (8)
 
Joined: Jan 2007
Posts: 7,140
Likes: 0
From: Saint Louis / Illinois
Originally Posted by Juiceh
What happened to Feb?
I needed more time
Old 10-02-07 | 03:52 PM
  #4  
zinx's Avatar
_________________________
iTrader: (3)
 
Joined: Jul 2002
Posts: 1,723
Likes: 1
From: Indianapolis
Will he do more than 25 psi?
Old 10-02-07 | 03:58 PM
  #5  
Viking War Hammer's Avatar
Thread Starter
*** Bless The USA
iTrader: (8)
 
Joined: Jan 2007
Posts: 7,140
Likes: 0
From: Saint Louis / Illinois
Originally Posted by zinx
Will he do more than 25 psi?
He'll do whatever you want.

He tuned mine to 30 psi last time and my current RX7 is 10 X more extreme.

I'm running 13,440 CC's worth of injector and plan on using it all
Old 10-02-07 | 04:05 PM
  #6  
zinx's Avatar
_________________________
iTrader: (3)
 
Joined: Jul 2002
Posts: 1,723
Likes: 1
From: Indianapolis
Originally Posted by Viking War Hammer
He'll do whatever you want.

He tuned mine to 30 psi last time and my current RX7 is 10 X more extreme.

I'm running 13,440 CC's worth of injector and plan on using it all
Methanol?
Old 10-02-07 | 04:11 PM
  #7  
Viking War Hammer's Avatar
Thread Starter
*** Bless The USA
iTrader: (8)
 
Joined: Jan 2007
Posts: 7,140
Likes: 0
From: Saint Louis / Illinois
Originally Posted by zinx
Methanol?
Aux Methanol injection like you.
Old 10-02-07 | 04:12 PM
  #8  
PDViper77's Avatar
HAHA V8
iTrader: (9)
 
Joined: Jul 2004
Posts: 2,953
Likes: 1
From: West Palm Beach - FL
I PM'D steve about a question I had. I will be down for this but quit moving the date cause I need to buy my plane tickets and once I buy them they are non-refundable.........
Old 10-02-07 | 04:13 PM
  #9  
Viking War Hammer's Avatar
Thread Starter
*** Bless The USA
iTrader: (8)
 
Joined: Jan 2007
Posts: 7,140
Likes: 0
From: Saint Louis / Illinois
Originally Posted by PDViper77
I PM'D steve about a question I had. I will be down for this but quit moving the date cause I need to buy my plane tickets and once I buy them they are non-refundable.........
You big baby. . . .

Give me some gas money.
Old 10-02-07 | 05:08 PM
  #10  
Viking War Hammer's Avatar
Thread Starter
*** Bless The USA
iTrader: (8)
 
Joined: Jan 2007
Posts: 7,140
Likes: 0
From: Saint Louis / Illinois
Attn !



ATTN !!!!!!


March 22-23 is Easter Weekend so this is not going to work with me and most people. So, the date has been changed to March 29-30.
Old 10-02-07 | 09:46 PM
  #11  
siguy2k's Avatar
SLEEPER
iTrader: (3)
 
Joined: Nov 2005
Posts: 1,140
Likes: 7
From: nebraska
He will tune a Apexi Neo too wont he?
Old 10-02-07 | 11:13 PM
  #12  
Busted7's Avatar
Will work for horsepower

 
Joined: Mar 2006
Posts: 1,865
Likes: 1
From: Springfield, MO
Good thinking Eric 4 injecters pump and 4 injecters methonal. I think your on to something big!!
Old 10-02-07 | 11:17 PM
  #13  
Viking War Hammer's Avatar
Thread Starter
*** Bless The USA
iTrader: (8)
 
Joined: Jan 2007
Posts: 7,140
Likes: 0
From: Saint Louis / Illinois
Originally Posted by Busted7
Good thinking Eric 4 injecters pump and 4 injecters methonal. I think your on to something big!!
Nope, I'll have the same type of fuel running through all 8 injectors
Old 10-05-07 | 09:09 PM
  #14  
teamrj83's Avatar
Full Member
 
Joined: Mar 2007
Posts: 197
Likes: 0
From: illinois
im down in 2weeks ill send my deposit.
Old 10-05-07 | 10:32 PM
  #15  
siguy2k's Avatar
SLEEPER
iTrader: (3)
 
Joined: Nov 2005
Posts: 1,140
Likes: 7
From: nebraska
So will he tune a apexi neo? if so ill probly be in. Thanks
Old 10-05-07 | 11:04 PM
  #16  
Viking War Hammer's Avatar
Thread Starter
*** Bless The USA
iTrader: (8)
 
Joined: Jan 2007
Posts: 7,140
Likes: 0
From: Saint Louis / Illinois
Originally Posted by siguy2k
So will he tune a apexi neo? if so ill probly be in. Thanks
Yes, he will. Just make sure you bring all documentation, software and hardware with you.

Old 10-06-07 | 01:53 AM
  #17  
siguy2k's Avatar
SLEEPER
iTrader: (3)
 
Joined: Nov 2005
Posts: 1,140
Likes: 7
From: nebraska
Well I have the manual if thats what you mean. There is no software or hardware???
Originally Posted by Viking War Hammer
Yes, he will. Just make sure you bring all documentation, software and hardware with you.

Also when would the deposit need to be in? Thanks
Old 10-06-07 | 08:28 AM
  #18  
Viking War Hammer's Avatar
Thread Starter
*** Bless The USA
iTrader: (8)
 
Joined: Jan 2007
Posts: 7,140
Likes: 0
From: Saint Louis / Illinois
Originally Posted by siguy2k
Well I have the manual if thats what you mean. There is no software or hardware???

Also when would the deposit need to be in? Thanks
Just bring the manual, just in case he needs a reference.

Deposits are needed asap, I'll be holding them until Steve gets here so they won't be cashed until after the tuning date.
Old 10-07-07 | 04:46 PM
  #19  
PDViper77's Avatar
HAHA V8
iTrader: (9)
 
Joined: Jul 2004
Posts: 2,953
Likes: 1
From: West Palm Beach - FL
Eric, I sent you my deposit. Let me know when you get it. Thanks.

Oh and can he tune a fully built DSM with DSM Link? my buddy has all of the software and everything. Let me know cause if so he will send in his deposit too.
Old 10-07-07 | 04:58 PM
  #20  
Viking War Hammer's Avatar
Thread Starter
*** Bless The USA
iTrader: (8)
 
Joined: Jan 2007
Posts: 7,140
Likes: 0
From: Saint Louis / Illinois
Originally Posted by PDViper77
Eric, I sent you my deposit. Let me know when you get it. Thanks.

Oh and can he tune a fully built DSM with DSM Link? my buddy has all of the software and everything. Let me know cause if so he will send in his deposit too.
Yes
Old 10-07-07 | 06:45 PM
  #21  
CowsniperRX7's Avatar
Rear Admiral
iTrader: (3)
 
Joined: Jul 2002
Posts: 1,685
Likes: 0
From: St. Louis, MO
Strippers
Old 10-07-07 | 07:41 PM
  #22  
toplessFC3Sman's Avatar
Rotary Freak
iTrader: (1)
 
Joined: May 2006
Posts: 2,169
Likes: 5
From: Ann Arbor, MI
i've heard that he doesnt touch megasquirt systems... is this true?

So its steve's price, plus $85 per hour for the shop itself?
Old 10-08-07 | 08:34 AM
  #23  
Viking War Hammer's Avatar
Thread Starter
*** Bless The USA
iTrader: (8)
 
Joined: Jan 2007
Posts: 7,140
Likes: 0
From: Saint Louis / Illinois
Originally Posted by toplessFC3Sman
i've heard that he doesnt touch megasquirt systems... is this true?

So its steve's price, plus $85 per hour for the shop itself?
Yes, he tunes megasquirt

https://www.rx7club.com/showpost.php...6&postcount=28

Yes, dyno time is extra.
Old 10-08-07 | 04:03 PM
  #24  
PDViper77's Avatar
HAHA V8
iTrader: (9)
 
Joined: Jul 2004
Posts: 2,953
Likes: 1
From: West Palm Beach - FL
Originally Posted by CowsniperRX7
Strippers
Old 10-08-07 | 04:11 PM
  #25  
PDViper77's Avatar
HAHA V8
iTrader: (9)
 
Joined: Jul 2004
Posts: 2,953
Likes: 1
From: West Palm Beach - FL
Eric, I hope you like little love note I sent with the check. LOL


Quick Reply: **STEVE KAN TUNING IN ST.LOUIS**March29th-30th 2008**Car Show**Strippers**



All times are GMT -5. The time now is 02:26 PM.