Megasquirt this is my n00b squirt thread
02-06-06 | 10:13 PM
#1
Thread Starter
Not a Racist
Joined: Aug 2003
Posts: 1,514
Likes: 0
From: virginia
this is my n00b squirt thread
i have a few questions ive read a few of the threads on here and i have some questions to ask
info on my car
i have an 83 gsl with a 1990 t2 swap
the only mods done to the motor are open exhaust (only have a flowmaster muffler with 3 inch pipe all the way back) and an apexi super intake removed emissions and a greddy type rs bov
now the first question is....can i buy an already built board like this one?
board
and if so what else would i need.
more questions to come
info on my car
i have an 83 gsl with a 1990 t2 swap
the only mods done to the motor are open exhaust (only have a flowmaster muffler with 3 inch pipe all the way back) and an apexi super intake removed emissions and a greddy type rs bov
now the first question is....can i buy an already built board like this one?
board
and if so what else would i need.
more questions to come
02-06-06 | 10:54 PM
#2
Senior Member
Joined: Nov 2003
Posts: 293
Likes: 3
From: Mich. USA
The board PCB3 will work with mods (read the FAQ) but MSII
is not yet developed for rotaries (again read the FAQ).
http://www.diyautotune.com/catalog/m...unit-p-56.html
This board built board will work... after you modify it.
Rotaries are a couple steps past your run of the mill megasquirt setup.
Just keep an eye on this forum and read up and you will get a good feel
for what it is necessary.
is not yet developed for rotaries (again read the FAQ).
http://www.diyautotune.com/catalog/m...unit-p-56.html
This board built board will work... after you modify it.
Rotaries are a couple steps past your run of the mill megasquirt setup.
Just keep an eye on this forum and read up and you will get a good feel
for what it is necessary.
Thread
Thread Starter
Forum
Replies
Last Post
