New to rotary TX
05-29-12, 11:11 AM
#1
From space
Thread Starter
Join Date: May 2012
Location: arlington tX
Posts: 8
Likes: 0
Received 0 Likes
on
0 Posts
New to rotary TX
Hello everyone
Recently purchased a (non running) 93 RX7. I figured I should join up here to learn a few things and to possibly share my general car knowledge as well.
Been tinkering with cars for a little while, this is my first rotary however. My last project was a j32(Acura V6) swapped Integra, was the first v6 swapped integra, and I Have owned everything from Honda's to Toyota's (AE86's and Supra) and even a couple of Fox body mustangs in the mix. I work for an engine company so I have a good knowledge base in just about every make the only thing we dont touch as you can guess is rotarys....
car will be a project but im in the middle of getting it started in it's current form just because. body is damn near perfect, interior needs some love and those wheels will be the first thing to go once it runs. but all in all, for what I paid I think I have a good starting point for something very sick in the future.
here are some pics of the last car
the FD
Recently purchased a (non running) 93 RX7. I figured I should join up here to learn a few things and to possibly share my general car knowledge as well.
Been tinkering with cars for a little while, this is my first rotary however. My last project was a j32(Acura V6) swapped Integra, was the first v6 swapped integra, and I Have owned everything from Honda's to Toyota's (AE86's and Supra) and even a couple of Fox body mustangs in the mix. I work for an engine company so I have a good knowledge base in just about every make the only thing we dont touch as you can guess is rotarys....
car will be a project but im in the middle of getting it started in it's current form just because. body is damn near perfect, interior needs some love and those wheels will be the first thing to go once it runs. but all in all, for what I paid I think I have a good starting point for something very sick in the future.
here are some pics of the last car
the FD
06-17-12, 08:18 PM
#3
Full Member
Join Date: Jun 2012
Location: san antonio tx
Posts: 48
Likes: 0
Received 0 Likes
on
0 Posts
welcome and HUGE PROPS on the dc... best thing i ever had was in my DA which was a superchraged gsr... then went over to nissans where my last two were a s14 and a swapped s12. had to sell and im now in a new motor mindset as well.. but yA WELCOME!!!
and once you wanna get rid of the wheels let me know
and once you wanna get rid of the wheels let me know
06-18-12, 12:44 PM
#4
From space
Thread Starter
Join Date: May 2012
Location: arlington tX
Posts: 8
Likes: 0
Received 0 Likes
on
0 Posts
welcome and HUGE PROPS on the dc... best thing i ever had was in my DA which was a superchraged gsr... then went over to nissans where my last two were a s14 and a swapped s12. had to sell and im now in a new motor mindset as well.. but yA WELCOME!!!
and once you wanna get rid of the wheels let me know
and once you wanna get rid of the wheels let me know
Thanks bud, The DC was really fun. The looks you got while driving it, especially here in dallas, were great.
I actually managed to get the FD to run this weekend, Still a long way to go. engine sounds really odd.
I'll post up a video later when I get home and maybe get some opinions on it.
06-18-12, 07:50 PM
#6
Junior Member
Join Date: Jun 2012
Location: Texas
Posts: 8
Likes: 0
Received 0 Likes
on
0 Posts
I'm in the same boat. Just joined today, with my new (to me) 1979 FB. No engine. No transmission. But a straight and (relatively) rust-free texas body.
Last edited by aliensporez; 06-18-12 at 07:53 PM.
Trending Topics
06-30-12, 10:34 PM
#9
Administrator
iTrader: (8)
Join Date: Nov 1998
Location: So. Arlington, TX!!!
Posts: 12,974
Likes: 0
Received 59 Likes
on
36 Posts
That's an interesting hood on that thar first car. What exactly "drove" you to pick up a non-running FD? Deal of the century? Still, glad you saved another RX-7! Thanks for taking the time to register and welcome aboard to RX-7 Club!
Here's the link to the South Forum board where some of the 3rdgen guru's in our area hang out. You might get some help here:
The South Forum
Mario III
Here's the link to the South Forum board where some of the 3rdgen guru's in our area hang out. You might get some help here:
The South Forum
Mario III
07-02-12, 11:07 AM
#14
From space
Thread Starter
Join Date: May 2012
Location: arlington tX
Posts: 8
Likes: 0
Received 0 Likes
on
0 Posts
That's an interesting hood on that thar first car. What exactly "drove" you to pick up a non-running FD? Deal of the century? Still, glad you saved another RX-7! Thanks for taking the time to register and welcome aboard to RX-7 Club!
Here's the link to the South Forum board where some of the 3rdgen guru's in our area hang out. You might get some help here:
The South Forum
Mario III
Here's the link to the South Forum board where some of the 3rdgen guru's in our area hang out. You might get some help here:
The South Forum
Mario III
As for the FD, I did get it for a really good deal IMO. I bought it being told it was some weird wiring stuff and injector issue but, assuming the worst ( blown seals ect). Ended up only taking a week or so of fixing some wring issues and replacing a coil pack and map sensor to get it running. Now im at a pretty tough crossroad on where to go next. Considering I bought the car with the intention of putting a V8 in it...
and the fact that the car has a few other weird issues.
Nice FD! I wonder how quick the integra moved with the v6 swap,,,,,mad props for originality!
Welcome. Nice fd not feeling the wheels but to each their own.
I think I have seen you at some meets in Arlington, at least the integra. Also I think I've seen that FD before too... Lol
07-03-12, 11:19 PM
#16
Clueless
Welcome! I'm in the same boat...trying to learn. I just got here to the forum about 2 days ago - don't know where my introduction post went but, eh. Anyway, I'm in Houston and am pretty darned jealous that you were able to pick up an FD like that. That's what I'm trying to find now, without having to sell my house to get one. Good luck getting her built!
Thread
Thread Starter
Forum
Replies
Last Post
datfast1
Old School and Other Rotary
18
06-20-19 10:53 PM
Under PSI
3rd Generation Specific (1993-2002)
19
09-23-15 11:47 PM
