Interior / Exterior / Audio Talk about interior and exterior mods including audio.

Valentine-1 install

Thread Tools
 
Search this Thread
 
Old 04-20-02, 06:47 PM
  #1  
Senior Member

Thread Starter
 
Join Date: Feb 2002
Location: Seattle / Bothell
Posts: 339
Likes: 0
Received 0 Likes on 0 Posts
Valentine-1 install

Has anyone installed a valentine one and wire it into the power going to the switches in the dome? The question i have is related to that phone cord, Can I use a standard phone cord and cut into it and run 2 of the wires to power/gnd? Which ones?

Thanks!
Jeff
Old 04-20-02, 07:36 PM
  #2  
smog nazi destroyer

 
riffraff's Avatar
 
Join Date: Jul 2001
Location: california
Posts: 1,681
Likes: 0
Received 1 Like on 1 Post
you can use a regular phone cord, but i am not sure which two you want to use.. just look at the wire box that it came with, and see.. i actually have mine wired into the cig lighter.
Old 04-23-02, 07:09 AM
  #3  
Newbie
 
rza786's Avatar
 
Join Date: Jan 2002
Location: Texas
Posts: 3
Likes: 0
Received 0 Likes on 0 Posts
Take a voltmeter and check for the power wire....from there you can check for ground aswell. I have done it but do not remember the wires. I will get home and check it out today and post another reply.
Old 04-23-02, 08:24 AM
  #4  
this week i'm driving...

 
rjuge's Avatar
 
Join Date: Mar 2002
Location: New Orleans, LA
Posts: 801
Likes: 0
Received 0 Likes on 0 Posts
too much hassle. you don't need a piggy detector. Because I am the nice guy I am, I'll take it off your hands for ya. You can sell it to me... ::sobs::.

Just run it to the fuse box.
Old 04-23-02, 09:16 AM
  #5  
03 Cobra Killer

 
nocab72's Avatar
 
Join Date: Jan 2002
Location: All Over
Posts: 1,423
Likes: 0
Received 0 Likes on 0 Posts
Smilez - You'll love that V1, mine has saved my a$$ many a time already!

k
Old 04-23-02, 09:20 AM
  #6  
Senior Member

Thread Starter
 
Join Date: Feb 2002
Location: Seattle / Bothell
Posts: 339
Likes: 0
Received 0 Likes on 0 Posts
Originally posted by nocab72
Smilez - You'll love that V1, mine has saved my a$$ many a time already!

k
Thanks

Yeah, in my last car, it saved me from 3 definate tickets with quite a few other most likely and possible times, I feel naked without it, heh
Old 04-23-02, 09:22 AM
  #7  
Rotary Freak

iTrader: (3)
 
sunshine's Avatar
 
Join Date: Feb 2002
Location: MN
Posts: 1,697
Likes: 0
Received 0 Likes on 0 Posts
V1's rule!
Just run it to the fuse box...
oh wait, someone said that already.
Old 04-23-02, 09:31 AM
  #8  
Senior Member

Thread Starter
 
Join Date: Feb 2002
Location: Seattle / Bothell
Posts: 339
Likes: 0
Received 0 Likes on 0 Posts
How are you guys running the wiring so no one sees it wher you run it to the fuse box? Are you mounting it lower then running it through the dash?
Related Topics
Thread
Thread Starter
Forum
Replies
Last Post
24seven_dada
3rd Generation Specific (1993-2002)
20
11-10-18 12:03 PM
Jeff20B
1st Generation Specific (1979-1985)
73
09-16-18 07:16 PM
sinclair7seven
General Rotary Tech Support
11
09-11-15 10:15 AM
astrum
2nd Generation Specific (1986-1992)
5
09-07-15 11:41 PM
Enzo1944
New Member RX-7 Technical
2
09-06-15 08:57 AM



Quick Reply: Valentine-1 install



All times are GMT -5. The time now is 08:42 PM.