Interior / Exterior / Audio Talk about interior and exterior mods including audio.

? for those that removed the center speaker.

Thread Tools
 
Search this Thread
 
Old 02-10-03 | 05:51 AM
  #1  
Kaotic Dan's Avatar
Thread Starter
Senior Member
 
Joined: Oct 2002
Posts: 290
Likes: 0
From: NM
? for those that removed the center speaker.

I'm thinking about ordering the tri-pod center channel gauge holder tommarow, but my system is still stock. I'm worried about loseing alot of sound quality by removing the center channel speaker. Did you guys notice a big difference? Thanks.
Old 02-10-03 | 09:27 AM
  #2  
JadedX's Avatar
Senior Member
 
Joined: Aug 2002
Posts: 322
Likes: 0
From: Baltimore
u will not lose that much at all

i don't even think mine works


your good
Old 02-10-03 | 11:14 AM
  #3  
CrispyRX7's Avatar
Polishing Fiend
iTrader: (139)
 
Joined: Apr 2001
Posts: 3,393
Likes: 43
From: MD
In short. No real quality change. Reduction in volume a bit (you will loose a speaker) but no big deal.
I dunno if this migt help but what the heck:
http://reganrotaryracing.tripod.com/tripower.htm

Regards,
Crispy
Old 02-10-03 | 01:37 PM
  #4  
Dragonz818's Avatar
Senior Member
 
Joined: May 2002
Posts: 492
Likes: 0
From: NJ
Dont worry you wont even notice.
Old 02-10-03 | 02:16 PM
  #5  
RX-7-Tobi's Avatar
Full Member

 
Joined: Nov 2002
Posts: 109
Likes: 2
From: Germany
STOP!

You will lose the nice high frequencies and your sound stage will become very bad when deactivating the center speaker.

http://www.tobias-albert.de/ta_rx7/r...i_int_oem.html

rgds
Tobias
Old 02-10-03 | 04:54 PM
  #6  
puma's Avatar
canadian monster
iTrader: (2)
 
Joined: Mar 2001
Posts: 2,083
Likes: 0
From: Trois-Rivières, Qc, Can
well if you have an aftermarket radio, it doesn't even work so...

and i ain't sure about the stock R1 radio either...
Old 02-10-03 | 05:04 PM
  #7  
RX-7-Tobi's Avatar
Full Member

 
Joined: Nov 2002
Posts: 109
Likes: 2
From: Germany
As far as I know, you only have to connect the amp power switch wire with the aftermarket amp contol and everything will work as b4 because the Bose amp modules have high-power inputs.

See the wirings on my website.

Tobias
Old 02-10-03 | 05:25 PM
  #8  
ZeroBanger's Avatar
Banned. I got OWNED!!!
 
Joined: Jun 2002
Posts: 3,323
Likes: 1
From: Buckhead
The center speaker is for making a "BEEP" sound when you redline the car. Mine does not play music.
Old 02-10-03 | 07:05 PM
  #9  
Shinobi-X's Avatar
Sensory Experience
 
Joined: Apr 2002
Posts: 840
Likes: 1
From: MD
My sound systems out, so I've never even heard mine. At what RPM does the "beep" sound?
Old 02-11-03 | 12:27 AM
  #10  
Kaotic Dan's Avatar
Thread Starter
Senior Member
 
Joined: Oct 2002
Posts: 290
Likes: 0
From: NM
Thanks for the advice guys. I'm a pretty big audiophile, so I don't want to lose any sound quality. I will be upgrading everything and removing the center channel in the future, but I don't want to lose any quality in the meantime. I think i'm just going to go ahead and take it out anyways, that gauge pod is just awesome. Hey if I really don't like it I can always put it back right? Thanks again.

Tobias - Very nice site! I wish I could read the rest that isnt in english!
Old 02-11-03 | 03:57 AM
  #11  
RX-7-Tobi's Avatar
Full Member

 
Joined: Nov 2002
Posts: 109
Likes: 2
From: Germany
What do you not understand?

Use a online translator, maybe you can understand.

Tobias
Old 02-11-03 | 08:26 PM
  #12  
crazysuprakid's Avatar
Rotary Enthusiast

 
Joined: Nov 2002
Posts: 888
Likes: 0
From: Grapevine,TX
it beeps at 7500 rpms.
Old 02-12-03 | 02:27 AM
  #13  
RX-7-Tobi's Avatar
Full Member

 
Joined: Nov 2002
Posts: 109
Likes: 2
From: Germany
Yes. But the center speaker doesn't make the beep! Comes from inside the speedometer gauge.
Old 02-13-03 | 02:53 AM
  #14  
rynberg's Avatar
Lives on the Forum
 
Joined: Dec 2001
Posts: 14,716
Likes: 8
From: San Lorenzo, California
Originally posted by Kaotic Dan
Thanks for the advice guys. I'm a pretty big audiophile, so I don't want to lose any sound quality. I will be upgrading everything and removing the center channel in the future, but I don't want to lose any quality in the meantime. I think i'm just going to go ahead and take it out anyways, that gauge pod is just awesome. Hey if I really don't like it I can always put it back right? Thanks again.
When you remove the grille and see the center speaker, you will lose your concerns about effecting the sound quality.....

The only point of the center channel speaker is to subjectively raise the soundstage. This is the only change to the sound I have noticed and only because I was listening for it.
Old 02-13-03 | 09:48 AM
  #15  
RX-7-Tobi's Avatar
Full Member

 
Joined: Nov 2002
Posts: 109
Likes: 2
From: Germany
Hey, whatz up with your ears?!?
Yes, the center is not the best. But better than nothing, right? It's the smallest speaker in the rex and so the main actor for the freqs from 5kHz and over.
And soundstage will get very unbalanced when removing the lil guy.

rgds
Tobias
Old 02-18-03 | 12:46 AM
  #16  
Flybye's Avatar
It's never fast enough...
 
Joined: Feb 2001
Posts: 3,760
Likes: 3
From: Miami - Given 1st place as the POOREST city in the US as per the federal government
I plan to remove the center speaker. And what do I plan to do thereafter? Just install a pair of tweeters and an amp within the same frequency range.

The center speaker is a beautiful location for the guage pod, but I'm a sound nut, too. You WILL notice the differance in sound quality when you remove that speaker.
Old 02-18-03 | 02:25 PM
  #17  
RX-7-Tobi's Avatar
Full Member

 
Joined: Nov 2002
Posts: 109
Likes: 2
From: Germany
Hi Flybye.

> You WILL notice the differance in sound quality when you remove that speaker

You're my man. ;-)

You can e.g. mount the tweeters in the trinagles where the mirror is outside. The best way to get at least that good sound stage as with the center you need a headunit with DSP for time delay. Around 1 ms for the left system and you will get a better sound stage than b4.
If not, just do it only with balance. But that's not the same like time delay + balance.

rgds
Tobias
Old 02-18-03 | 02:32 PM
  #18  
djantlive's Avatar
Rotary Enthusiast
 
Joined: Feb 2001
Posts: 1,213
Likes: 0
For those that debate over the usefulness of the center speaker, just put a jacket or something to muffle the center spkr and you know. It's that simple!

I think it balances the L and R channels.
Old 02-18-03 | 05:57 PM
  #19  
7-sins's Avatar
thats not paint....
 
Joined: May 2001
Posts: 2,231
Likes: 2
From: Manassas, VA
I wouldn't mind keeping mine but it was making some crackling at high RPMS and it wasn't putting out sound. It does sound better with it in but it doesnt sound bad w/o out either. Oh yeah dont cut the wires there is a clip you just have to tear off some of that foam stuff to find it.

Chris
Old 02-18-03 | 06:13 PM
  #20  
Senior Member

 
Joined: Nov 2002
Posts: 573
Likes: 2
From: LA
i didn't notice any loss! it's like it wasn't even ever there
Related Topics
Thread
Thread Starter
Forum
Replies
Last Post
risingsunroof82
1st Generation Specific (1979-1985)
8
09-07-15 01:11 PM



Quick Reply: ? for those that removed the center speaker.



All times are GMT -5. The time now is 06:26 AM.