Coolest table ever!
Most expensive table ever?

Sweet table! I've ran a set of those in the past, great errr..coffee table legs :)

When I powder coated the center sections, I had put the wrong ones on the rear cause them to be about .5-1" further out then normal. I've changed them out now and they fit much better now. The wheel specs are 18x12, +18 offset.

I'm an Oak man.

I was doing some searching and came across this really nice FD with a set of racing harts deep dish, 18's I believe, thing is just so sweet looking I had to post it.

http://www.hartwheels.co.jp/download...p_0306_rx7.jpg

Put these badboys on and the streets are yours.
http://www.fikse.com/images/profil5.jpg

Man. Have i got some DEEP dish for ya...i dunno about actually using these on your car though...

http://memimage.cardomain.net/member...6_103_full.jpg

http://memimage.cardomain.net/member...6_104_full.jpg
http://memimage.cardomain.net/member...6_108_full.jpg

http://memimage.cardomain.net/member...6_109_full.jpg

http://memimage.cardomain.net/member...6_110_full.jpg

My CCW wheels 20x11.5. Going on a wide body 3rd gen

Wow that's a big ass wheel!!!

omg bling!! thats gonna be crazy sexy though

Gotta see those 20's on the car!

Not 20's, but deep... 18x10front - 18x12 rear... Checkem' Out...

20s, eh? That better be a HUGE widebody kit, something like the RE 2002 GT kit lol. Cuz otherwise, that car is gonna look funky w/ so much rim :p:

What kind of Volk bronze rim was that on the second post by rotorboy?

<--------See Avatar:D

http://img114.exs.cx/img114/4223/picture0230nj6np.jpg

:eek: fuckin awsome!

guys - im bookmarking this thread. any info on the white fd
on the first page

*what kit?
*front end?
*wheels?

also that black fd on the first page , 3d pic of the black fd
that offset is nuts?? whats you guys opinion- on a crazy offset
like that?

-j

I think the white fd has a border kit

Lumil73.. Is your car photochopped in your sig? The way rear wheel meets the fender looks kinda funky to me.

Good enough for me.....
Lets see some pics of those wheels on your car!

yes!!

I lowered it with MS paint. Just wanted to see what it's going to look like when I install the suspension.

http://img29.exs.cx/img29/4585/frontkit3lb.jpg

is that pic also chopped

you are correct they are fugly :D

Can you guys start posting your offsets while you post these pix up?

yep!:D

http://www.burningroad.com/wendell/i...allenges01.jpg

http://www.burningroad.com/wendell/i...allenges02.jpg

Volk Challenges, custom metallic black.
19 x 9.5 -3 front, 19 x 10.5 -9 rear

*** FC3S ***

Those are nice!!

Mine

Those are nice!

wow those are for an FC???

thats crazy pics would be awesome man

post pics plz :drool:

why dont they make some nice 5 spoke 17's or 18's to fit on a first gen? i want lip!

I want those VOLK Gram Lites from that first black FD on my FC. That would be sweet with a widebody kit.

Do mine count? I have a 8...;)

http://memimage.cardomain.net/member...13_34_full.jpg

http://memimage.cardomain.net/member...13_36_full.jpg

http://memimage.cardomain.net/member...13_35_full.jpg

http://memimage.cardomain.net/member...13_37_full.jpg

Thread with fitment pictures. You probably have to scroll down.

http://www.burningroad.com/wendell/i...allenges02.jpg

No way these will fit on a regular FD.. Man.. they are DEEP!!! what's the offset on these things..

thats what i have currently. not too bad especially for the price. anything looked better then the tarnished chrome stock wheels i had on there. i will be selling these wheels some time in the real near future. unless somone wants to trade their stock wheels plus a little extra cash! :)
rear:
http://www.MyPhotosHub.com/is.php?i=...g=IMGA0010.JPG
rear lip:
http://www.MyPhotosHub.com/is.php?i=...g=IMGA0011.JPG
front lip:
http://www.MyPhotosHub.com/is.php?i=...g=IMGA0013.JPG
direct view:
http://www.MyPhotosHub.com/is.php?i=...g=IMGA0015.JPG

18x8.5 front, 18x9.5 rear, +40 offset.

I think the ADRs are hot. Lots of people don't like them becuase they think they are cheap....But the good thing is that when you ding one...Toss it and buy another one! Try doing that with a special order Volk wheel...I waited 7 months to get my Gramlites...I wish I could have the piece of mind that when/if I do ding them I can get easy access to them.

Oh man those rims are basically calling out my name. I can't wait till the semester is over and I'll get them, with my new single turbo. Hurray!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!

OMG how much does that thing cost?

yeah they are nice considering the price range. they are a little heavy for comfort but i'm not complaining. I had some brown-like tarnished chrome stockies on the car when i first got it, so I just bought the ADR's for pure cosmetic reasons. but I ordered them from Vision Autosport in Hacienda Heights out in So. Cal. James there got me all four with tires for around $1,200! :O took about 4 days to get them. hahaha. But of course i've been shopping with him since day one. anyone else would probably pay about $500 or so more.

[QUOTE=c00lduke]https://www.pbase.com/c00lduke/image/29937302.jpg
https://www.pbase.com/c00lduke/image/35429716.jpg

Sorry for the blury pic. But I'm pretty sure they are "deep" :)[/Q

WHAAT THAT HELL!!!!

HUGE

I just got these on about a month ago.. Blitz 18x10.
http://homepage.mac.com/herblennyfeb...147D4C11D9.jpg
http://homepage.mac.com/herblennyfeb...627D4C11D9.jpg

y havent i seen any ADVAN super RG's?

... Think about it. How expensive are Yokohama ADVANs? Now, factor that with the rarity factor and the fact that Makin Industries is JUST now starting to offer them to us.

simply amazing, i love it :)

what kind of rims are those? i know its blitz but what model?

those are blitz technospeed rob. :)

Thank you..

RX7 Rage is correct.. they are Blitz Technospeed.. I like them but pretty damnheavy since they are 2 piece rims.

http://homepage.mac.com/herblennyfeb...9E7D4C11D9.jpg

Congrats Phil! Looks great! :bigthumb: How heavy are we talking about (w/ sizes for reference)? My SSR GT3s are 3 peice wheels, and the 8.5s are 22 lbs I believe, and the 10s are 25.6 lbs! :eek:

Too bad SSR is bankrupt and are folding. I hear they're not even going to try to salvage the company, although it's likely their assets will eventually be snatched up by another company. SSR had the deepest dish wheels. IMHO, it doesn't count as "dish" if the spokes curve inward to provide the illusion of dish. Those kinds of wheels, when spinning, don't look deep at all. To me, dish is the area you clearly see above the face of the rim. Modern sports car offsets don't allow for very much dish. FD offsets are nearly the same as a Honda Prelude, for instance. Not that's a bad thing at all though, considering that most high performance cars are moving in that direction - even Porsche, which used to be the kind of deep dish.

Back to SSR, how deep the dish on a certain size and offset rim is a combination of the spoke design and the back cut of the face. SSR had many flat face centers and offered some radically shaved mounting surfaces in the rear. You'd have to be really careful about caliper clearance, but if you measured it right, no one beat SSR. My Volks have 125mm (5") of dish in the rear, but the same size and offset rim from SSR had 152mm - 6"!

I couldn't afford the SSR's I wanted though, and now they're gone. =(