adamk858

I've got an amp and subwoofer just waiting to be hooked up, but after a look at the firewall I can't seem to find a hole to bring the wire from the battery to the trunk for the amp. Am I just missing it, or is there none on a 3rd gen rx7? If not, I'll just have to drill one... ;-)

Black97VR4

Steering wheel boot or drill one.

Oh, and an amp and sub aren't curing the stock stereo.

fastcarfreak

drill one. Although replacing the stock components in the the FD if you have the upgraded bose system is a complete pain in the ***, if you have the non upgraded stereo system, i suggest you replace all the components first. It should sound much better. I replaced all my Bose stuff, with Infinity kappa stuff, i also just recently added the infinity basslink to the car. It really sounds good. I had to make custom brackets for the rear speakers though, and i had to cut the stock front speaker boxes to mound some new speakers in the stock location.

adam

adamk858

I already replaced front speakers, did the same and did some...odd...work to the front speakers to put bigger ones in. I just wanted to get the sub in without having to drill a hole if possible...but o well.

Thanks for your help fellas.

WHOOSH

I also drilled a hole, runing 4g wire......

David88vert

I ran through the hole behind the fuse block,then into the engine compartment under the cruise control. Of course, you have to take the fender off to do it, but I already had mine off. The holes are already grommetted.