how about a interior pic thread of gauge pods and mounts. i want to see where you guys like to mount your gauges... im thinking of taking out the center vent and mounting 3 gauges there and 2 on the a pillar.

 

+1 for this thread.


i wanna see some pics of mounted guages

 

stock looking:

 

 

slayers94rx7 how you got the autometer in you stock cluster.Let me know how you did it.Wanna do the same thing with my gauge

 

I had originally scene it done on Max Cooper's website a few years ago.
http://www.maxcooper.com/rx7/how-to/spa_gauges/
I wanted to keep more of a stock look in the gauge cluster, so I had the oil pressure and water temp gauges replaced with the 2 aftermarket autometer gauges, volt meter and oil temp. The two gauges were removed from their housing leaving just the internal parts needed to install them. I did not want to remove any of the glass or chrome rings on the dash surrounding the gauges. If you were to keep the aftermarket gauges in their housings, you would have to remove the glass and chrome rings for each gauge u replaced.

 

 

Tri-Power Center Channel Dual Gauge Pod, Autometer A-Pillar Triple Gauge Pod, Autometer CF Gauge Cup on steering column, APEXi Commander Holder, Custom CF Glove Box; plus electronics.

 

 

when are people going to realize not to use the flash on interior pics, it accentuates the dust/shine/fading etc. You need to proved natural lighting to make it look right. Just pop the hatch and throw a shop flurecent light back there and snaps pics in manual mode

Anways nice interiors/gauges

 

 

here a couple from mine...I can't seem to find all the really good ones...except that Defi one...I have 3 60mm defi bf in franks tri-pod with mazdaspeed cluster!

 

^^ Your car is rice :-)

 

You need to get a steering wheel Nick.

 

 

Defi D's

 

Sweet E-Brake, how does it fit? loose or nice and snug?

 

haha..funny you say that...It will be here Monday Nardiiiii

 

Anyone running dual 60mm gauges in the A-Pillar? Thinking about upgrading mine from 52mm to 60mm, but worried it will get in the way of steering with a stock steering wheel.

 

60mm Apexi el guages in a flyrx7 pod that mounts in the center speaker location.

 

How were you able to paint the passenger side ac vent? AND the center vent?! I cant get that sucker to pop out?!?

LOL just noticed, type R racing floor mats... BALLER!

 

I use a hook to take off door panel and went around it slowly and pulling it off. My boy help me out. He does it all the time, Paint interior. Buying the stock floor mat was kind of hard to find in a good condition. But i'm going to buy the custom floor mat once i get some money.

 

Innovate wideband and SARD boost gauge/controller in autometer full a-pillar gauge holder

 

Nuvolari, what kind of a-pillar is that and from where did you buy it? I like it !!

 

I got it from Jason at the RX7 store . Thanks for the kind words.

What are the roads like in Malta ?