i have a bride zeta III seat from my s13 that i want to put in my fd. however i heard someplace that the zeta III will not fit in the fd. does anyone know if this is true? thanks.

 

Well, if you HAVE the seat already, why don't you take out a tape measure and SEE if it will fit?

 

it won't fit because the shoulders on the zeta 3 are too wide and hits the door panel of the FD. I've tried fitting it using the bride rails and they didn't fit

 

thanks

does anyone know if the artis III will fit in the fd?

 

the artis will not fit either, because one shoulder is too wide.

the only one that will fit is the EXAS

 

How about ZETA II?

Thanks

 

thanks for the info 1FooknTiteFD

 

I have jsut recently got a pair of bride buckets (the no-inclinable type) that came off the MR-S special edition. i took some measurements and got a steel fabricator to custom made the bracket for me so i can bolt the bucket onto the factory rail. i've taken the position of the seat to the center of the rail... as the result the shoulder hits the panel, so i have gone back to the fabricator to make me another one now with the 4 anchors move 20mm toward the center console side, i will post some pics next time i got it right. the point is, i believe any seat can be mounted onto FD as long as you can get a bracket made up, for my case, i have to do it twice to get it right.