Interior / Exterior / Audio Talk about interior and exterior mods including audio.

Antenna Not Working

Thread Tools
 
Search this Thread
 
Old 10-27-03 | 11:53 PM
  #1  
Louis M's Avatar
Thread Starter
Rotary Enthusiast
 
Joined: Aug 2002
Posts: 1,090
Likes: 0
From: RX7 Heaven
Antenna Not Working

One day, when I turned off my stock radio, the antenna didn't go down, but the sound was made as if it was trying... is there a way to see whats up? It almost sonds like its offtrack... it is easy to fix?
Old 10-28-03 | 12:29 AM
  #2  
rockshox's Avatar
-
iTrader: (3)
 
Joined: Nov 2002
Posts: 624
Likes: 0
From: SF Bay Area
the plastic toothed cord inside the mast is probably broken. happens all the time. you can get a replacement mast from mazda which is much cheaper than replacing the whole motor assembly.
Old 10-28-03 | 07:03 AM
  #3  
Louis M's Avatar
Thread Starter
Rotary Enthusiast
 
Joined: Aug 2002
Posts: 1,090
Likes: 0
From: RX7 Heaven
thats prob a few bucks right?
Old 10-28-03 | 09:28 AM
  #4  
keynote22's Avatar
Rotary Enthusiast
 
Joined: Oct 2002
Posts: 806
Likes: 0
From: fly over state
the mast is cheap...its the work thats a pain. some have said you can thread the mast back in through the top..I had no luck with that. Plus, if you dont get all the plastic out of the housing, then you'll wreck the new mast too.

I bought a new heavy duty motor from crutchfield ($79 I think) and it bolted right up. Plus the mast was black which is cool for my red and black car

Its a real pain to replace the motor...basically you have to remove everything in the trunk (fd). I did a write up on how to do it as did a few others. Takes a long time.
Old 10-28-03 | 10:11 AM
  #5  
Radical Rotary Avantgard's Avatar
Sleeper
 
Joined: May 2002
Posts: 560
Likes: 0
From: North Dallas
Cool

I must be gifted, lucky or both.
Mine did not go down either and all I had to do is replace the mast and thread it thru the top. Was not expensive, for a change.
I can see having dificulty in working in such a small space to remove the atenna motor, that must be a B..ch.
If you hear it, then most likely the motor is good and all you got to replace is the mast. No need to remove the motor if the strip is not broken.
Also you need someone to turn the radio on and off.
It will help alot.
Related Topics
Thread
Thread Starter
Forum
Replies
Last Post
maikelc
3rd Generation Specific (1993-2002)
8
08-24-15 12:04 PM




All times are GMT -5. The time now is 09:25 AM.