Larz

The 99 spec front bumper spoiler is the cheapest I've been able to find new
so far. However, it say two holes need to be drilled for it to fit on the
US bumper. Is this for those little spikes to stick up through? Or will I
need to buy additional anchor nuts and bolts? I'm assuming it's a rather
easy operation, but I figured I'd ask before I started drilling holes in my
baby. Is there any other fitament issues? Or other than that does it go on
pretty smooth? I found it on rx7store.net for under 180, if I recall
correctly.

Sparkey

As far as I recall it fits right on too the 93 bumper at least thats what Chris at Rx7.com has always told me. You shouldnt have any problems I know it fits.

Shinobi-X

From what I hear, there is a bit of work that needs to be done in order to mount it. The thread below should clear some things up a bit.

https://www.rx7club.com/interior-exterior-audio-26/best-place-buy-99-front-lip-spoiler-334732/

MrBojangles

I just cut the little spike things off, and it fit perfect... Just used a butter knife and 10 seconds of work

showoff

i drilled the extra 2 holes in my 99spec spoiler, its not a must but it makes it fit more flush, it took exactly 5mins, any1 could do it, you cant really mess up, when u line up the 99spec spoiler to the 93front bumper you will see an extra hole on each side just mark where that hole is on your 99spec spoiler, and drill it and your done.