3rd gen 5spd illuminated shift knob
#55
Senior Member
iTrader: (4)
Join Date: Aug 2002
Location: long island ny
Posts: 318
Likes: 0
Received 0 Likes
on
0 Posts
Finally! About 2 more weeks untill they arrive at our doorsteps? If you could send me tracking info when it is available it will be much appreciated. Tobecontinued@optonline.net
Thanks
Bill
Thanks
Bill
#56
Full Member
Join Date: Feb 2002
Location: NEW JERSEY
Posts: 194
Likes: 0
Received 0 Likes
on
0 Posts
If you could send me some tracking info also. AlbertFerPar@aol.com
#62
DGRR 2017 4/26-4/30, 2017
iTrader: (13)
Originally Posted by tobecontinued
wait this isn't a group buy for neon shifters? damn.
BTW- any news Herblenny?
BTW- any news Herblenny?
I've already put the update.... Its in!! I'll be shipping it out to people who placed this order tomorrow.
PHIL
#63
DGRR 2017 4/26-4/30, 2017
iTrader: (13)
Update 9-21-2004:
I just sent the ***** out.. If you want tracking info, please pm me..
Otherwise, you should get the ***** in next 2-5 days..
I'll post pic on how to install.. For an FD, there is a cleaner way to do it.. Also, if you cut .5 to .75 inch off the thread, shift **** will sit much better. I've done this and few others from 1st GB have done this.
Also, this kit will come with new shift boot. Its pretty nice! and will install on the FD shift panel.
PHIL
I just sent the ***** out.. If you want tracking info, please pm me..
Otherwise, you should get the ***** in next 2-5 days..
I'll post pic on how to install.. For an FD, there is a cleaner way to do it.. Also, if you cut .5 to .75 inch off the thread, shift **** will sit much better. I've done this and few others from 1st GB have done this.
Also, this kit will come with new shift boot. Its pretty nice! and will install on the FD shift panel.
PHIL
#64
DGRR 2017 4/26-4/30, 2017
iTrader: (13)
Another issue just came up..
All the tracking number I sent you before is missing the last digit..
what I'm going to do is give that last number on this thread.. instead of me pm ing all of you..
I should have this number by end of today..
Sorry about this.. the printer at UPS apprently cut the last digit off.
PHIL
All the tracking number I sent you before is missing the last digit..
what I'm going to do is give that last number on this thread.. instead of me pm ing all of you..
I should have this number by end of today..
Sorry about this.. the printer at UPS apprently cut the last digit off.
PHIL
#65
DGRR 2017 4/26-4/30, 2017
iTrader: (13)
I just went thru with UPS personel and found all the last digits..
W. Somerville = last digit is "3"
A. gonzalez = "0"
E. Gottfried = "7"
L. Surniak = "6"
J. Crouch = "0"
R. Nasr = "5"
J. Salmond = "7"
S. Kaas = "1"
Sorry about this.. It really wasn't my fault..
PHIL
W. Somerville = last digit is "3"
A. gonzalez = "0"
E. Gottfried = "7"
L. Surniak = "6"
J. Crouch = "0"
R. Nasr = "5"
J. Salmond = "7"
S. Kaas = "1"
Sorry about this.. It really wasn't my fault..
PHIL
#67
DGRR 2017 4/26-4/30, 2017
iTrader: (13)
installation..
1. cut the harness circled, cut higher up on the wires.. pass the pointed arrow.
2. Tape the ends of the wires.
3. Now using supplied connector(red) to tap into the ashtray light wires. I have it matching the wiring as follow... Green to Blue (rx8 harness)
**Should look kind of like this**
***Make sure the **** is screwed down and than plug in the harness to the one that is attatched to the ashtray light... see pic below***
Hope this helps..
Thread
Thread Starter
Forum
Replies
Last Post
REX7&Z32TT
New Member RX-7 Technical
2
09-14-15 08:46 AM