(3) 10" spare tire well enclsoure
#1
Rotary Enthusiast
Thread Starter
Join Date: Apr 2002
Location: pembroke, ma
Posts: 990
Likes: 0
Received 0 Likes
on
0 Posts
(3) 10" spare tire well enclsoure
Just seeing if anyone would be interested in these. This is a rough copy as some of the lines still havent been smoothed out yet. But as you can see it takes up minimal trunk space and sits tightly inside the spare tire well and will hold (3) 10" subs with a recessed lip. Enclosure is extremely light due to it being 90% fiberglass. If you interested, let me know.
Sorry my hatch area is such a mess there is a ton of wood glue like **** all over it, it came that way when i got it and I havent cleaned it up yet.
Sorry my hatch area is such a mess there is a ton of wood glue like **** all over it, it came that way when i got it and I havent cleaned it up yet.
Trending Topics
#8
Rotary Enthusiast
Thread Starter
Join Date: Apr 2002
Location: pembroke, ma
Posts: 990
Likes: 0
Received 0 Likes
on
0 Posts
Well I will work with the people interested to set up a price that is fair. Its an entire fiberglass enclosure with the exception of one small side where the terminal connector will be, and the trim rings. What are you guys willing to pay? I can also set this up for (2) 12's, (2) 10's, (2)8's, (3)8's, or (1) 15", (1)12", (1) 10". Just let me know.
#9
Rotary Enthusiast
Thread Starter
Join Date: Apr 2002
Location: pembroke, ma
Posts: 990
Likes: 0
Received 0 Likes
on
0 Posts
the other thing to determine the price is whether you want unloaded or loaded boxes. i can get any sub you want, I carry everything from alpine, audiobahn, jl audio, matts, kicker, xtant, powerbase, cutting edge audio, clarion, pioneer, kenwood, mtx, etc. etc. etc. just to give you an idea of what I can get. Im more expensive then ebay but you get a receipt from me as I am an authorized dealer of those products
#13
Rotary Enthusiast
Thread Starter
Join Date: Apr 2002
Location: pembroke, ma
Posts: 990
Likes: 0
Received 0 Likes
on
0 Posts
I can do the (2) 12", after measuring it out there can either be two rasied edges (subs slanted down) or one raised edge in the middle subs facing outward and up.
#15
Rotary Enthusiast
Thread Starter
Join Date: Apr 2002
Location: pembroke, ma
Posts: 990
Likes: 0
Received 0 Likes
on
0 Posts
Im also developing other boxes for the fd that will retain the spare tire well, a fiberglass one in the left hand corner of the car angled slightly and a wooden box with partial fiberglass for under the strut bar, but they wont be ready for a while. I was just on the supraforums looking at a stealthbox that nazar is making and he is charging $350 shipped per box, that price is for unloaded enclosures. Is that price fair to all of you because of the labor involved by making these each by hand (NO MASS PRODUCING)
#21
Rotary Enthusiast
Thread Starter
Join Date: Apr 2002
Location: pembroke, ma
Posts: 990
Likes: 0
Received 0 Likes
on
0 Posts
ok, then $350 shipped it is. to those who want sub enclosures I will need payment up front before I work on the project. i can do about one a day because I also work full time. Then I will final sand, so ship date from initial order is about 3 days so expect them in about a week. I need to know what you are planning on putting in these enclosures, so i will need cutout diameter of the sub or subs. Email all orders to teamafx@hotmail.com and I will respond with the paypal id for the payment. I am paypal verified and have a 100% satisfaction feedback. Thanks!
#23
Rotary Enthusiast
Thread Starter
Join Date: Apr 2002
Location: pembroke, ma
Posts: 990
Likes: 0
Received 0 Likes
on
0 Posts
well the fiberglass materials and time is the same pretty much whether its 1 sub or 3 subs. If we do a flat topped box with the single 12" then I can do it for $300