Haltech new to this can you run a e6k with stock 2nd gen leading and trailing coils?
07-17-05 | 02:42 AM
#1
Thread Starter
good to be back
iTrader: (7)
Joined: Apr 2002
Posts: 1,106
Likes: 4
From: Kingsport, TN
new to this can you run a e6k with stock 2nd gen leading and trailing coils?
i'm doing this for a friend he bought a used haltech e6k and the wiring harness. some connectors are there some are not so i'm trying to figure out someone elses mess. i need to know which wires to use to run the stock 2nd gen leading and trailing coils if possible. i see it has the stock connectors for the cas and 2 89-91 stock injectors but the other 2 are missing, just cut wires. and i notice it's using a stock connectors from a s5 tps but only using the 3 wires for the full range sensor, will this work? my computer is doing some weird **** and just turns off and on whenever it wants so i don't know if i'll be able to view your replys and i'm doing this tomorrow morning so if anybody has any advice please call me at 832-253-8494 thanx
Ryne
Ryne
07-18-05 | 10:10 PM
#2
Rotary Enthusiast
Joined: Apr 2001
Posts: 1,289
Likes: 0
From: North Hollywood, Ca USA
search function is good for these type of questions. this has been discussed a thousand times. https://www.rx7club.com/showthread.p...6k+coil+wiring
07-19-05 | 02:11 PM
#3
Locust of the apocalypse
Joined: Apr 2003
Posts: 2,553
Likes: 1
From: Directly above the center of the earth (York, PA)
Originally Posted by rexman13b
i'm doing this for a friend he bought a used haltech e6k and the wiring harness. some connectors are there some are not so i'm trying to figure out someone elses mess. i need to know which wires to use to run the stock 2nd gen leading and trailing coils if possible. i see it has the stock connectors for the cas and 2 89-91 stock injectors but the other 2 are missing, just cut wires. and i notice it's using a stock connectors from a s5 tps but only using the 3 wires for the full range sensor, will this work? my computer is doing some weird **** and just turns off and on whenever it wants so i don't know if i'll be able to view your replys and i'm doing this tomorrow morning so if anybody has any advice please call me at 832-253-8494 thanx
Ryne
Ryne
The injectors... dude was probably using the stock 89-91 primaries and aftermarket secondaries most likely 1000's or 1600's.... kept the connectors when he sold the haltech so he didn't have to buy new ones
the TPS..... You only need the full range part of the s5 TPS for the haltech, so yes, it will work.. (s4's only have a low range TPS.. therefore, you have to either buy an s5 t-body and TPS.. or rig up a bracket and use the haltech TPS like i did!!!).
