I just bought two 1200cc low impedance injectors and I have a E8 I know that the Haltech E8 can run four low impedance injectors. So will I need a resistor pack or do I set the Haltech up for low impedance injectors. Also I found High impedance injectors for my primary injectors. Can I run one set low impedance injectors and the other high impedance.

 

No resistor pack needed. You can mix and match low and high impedance on the system as long as you don't tie a low and a high together on the same driver (INJ1, 2, etc).

B

 

Do you see value in replacing the primaries with P&H injectors?

I currently have 1600s for secondaries, and am wondering if it would be worth it to find some suitable low impedance injectors to run in the primaries instead of the stock 550s. I would really like to maintain a stock idle.

I will be using a PS 1000 though; not an E8 if that matters...