I am getting ready to install a E6k on my 93 with a 60-1 single kit, the haltech has a terminating harness and a 3 bar map. its off a 89 turbo II. Does anyone have any maps to help me get started? Are there any pointers on the install? DO you splice the stock tps and temp sensors? Please send any maps to
LPayne290@msn.com
thanks for the help:p

 

Thanks for all the help guys. I guess no one is running a E6K on a FD

 

post this info.

What fuel injectors you are running
your base fuel pressure
and just aboue anythign else you can think of

there is someone here who will have a map suitable its just a matter of waiting for them to show themselves for ya

 

There are a few folks on this board that can give you a map to get you running. We just need more info other than turbo size. Is your motor ported, what kind of exhaust, fuel injectors, and what fuel you plan on using.

There are some basic maps on my site, just go to the Haltech section and you should be able to find some good info.

PS If you d a search on Haltech you will only find my site in relation to the ECUs.

 

Here are my specifics:
550 primaries
1300 secondaries
hks FPR with psi about 36(but will adjust to maps)
-6 an lines with walbro 255
Big street port motor 2mm racing beat 1 piece seals
60-1 hifi with .81 exhaust
3inch exhaust
Apexi fmic
HKS twin power


Any maps or installation advice would be very much appreciated.
thanks for the help