Haltech datalog problem...E6X
11-12-06 | 01:48 AM
#1
datalog problem...E6X
I don't understand datalog ......
Wish data log was like E6K setup...
Can anyone help me understanding datalog procedure...
Like rpm,coolant,air temp,.....
AND what the hell is >>>>>>>>> (NULL)
AN also with E6K i can datalog wideband with volts....
now its Mv.....does anyone have a chart to transfer Mv into airfuel ratio....
With E6K i can datalog an see bar an range to add or remove fuel....\
also ...rpm,coolant,airtemp,battery,boost,....
Dont get me wrong car is working fine...no problem what so ever...just need to fine tune an don't know **** about E6X datalog page....
Right now i'm running ..fuel setting from E6K...LIL TO RICH ..just need to understand datalog b4 i start to remove fuel from MAPS....
THX Marvin......
Wish data log was like E6K setup...
Can anyone help me understanding datalog procedure...
Like rpm,coolant,air temp,.....
AND what the hell is >>>>>>>>> (NULL)
AN also with E6K i can datalog wideband with volts....
now its Mv.....does anyone have a chart to transfer Mv into airfuel ratio....
With E6K i can datalog an see bar an range to add or remove fuel....\
also ...rpm,coolant,airtemp,battery,boost,....
Dont get me wrong car is working fine...no problem what so ever...just need to fine tune an don't know **** about E6X datalog page....
Right now i'm running ..fuel setting from E6K...LIL TO RICH ..just need to understand datalog b4 i start to remove fuel from MAPS....
THX Marvin......
11-12-06 | 01:28 PM
#2
Originally Posted by streetRx7
I don't understand datalog ......
Wish data log was like E6K setup...
Can anyone help me understanding datalog procedure...
Like rpm,coolant,air temp,.....
AND what the hell is >>>>>>>>> (NULL)
AN also with E6K i can datalog wideband with volts....
now its Mv.....does anyone have a chart to transfer Mv into airfuel ratio....
With E6K i can datalog an see bar an range to add or remove fuel....\
also ...rpm,coolant,airtemp,battery,boost,....
Dont get me wrong car is working fine...no problem what so ever...just need to fine tune an don't know **** about E6X datalog page....
Right now i'm running ..fuel setting from E6K...LIL TO RICH ..just need to understand datalog b4 i start to remove fuel from MAPS....
THX Marvin......
Wish data log was like E6K setup...
Can anyone help me understanding datalog procedure...
Like rpm,coolant,air temp,.....
AND what the hell is >>>>>>>>> (NULL)
AN also with E6K i can datalog wideband with volts....
now its Mv.....does anyone have a chart to transfer Mv into airfuel ratio....
With E6K i can datalog an see bar an range to add or remove fuel....\
also ...rpm,coolant,airtemp,battery,boost,....
Dont get me wrong car is working fine...no problem what so ever...just need to fine tune an don't know **** about E6X datalog page....
Right now i'm running ..fuel setting from E6K...LIL TO RICH ..just need to understand datalog b4 i start to remove fuel from MAPS....
THX Marvin......
Thread
Thread Starter
Forum
Replies
Last Post
crai6m4ck
3rd Generation Specific (1993-2002)
9
09-24-02 08:43 AM
twokrx7
Power FC Forum
18
05-08-02 08:30 PM
RichJ
Engine Management Forum
1
11-14-01 09:00 AM
