eo2am

iTrader: (9)

Hey Im back from Afgh, and I want to start driving my fd, But I have this problem the car runs ok, but it stalls under boost at 6psi.

Im running a PS1000
LS2 coils, single turbo.

Also anybody in the Oxnard area that can tune? I can drop the car off if you have a shop.

C. Ludwig

iTrader: (27)

Does it lean out or load up? Sounds like you have an issue with the transition to the secondary injectors. A good tuner will fix that up. Unfortunately, not familiar with anyone in CA anymore.

eo2am

iTrader: (9)

It feels like igintion cut.

I can go with the guy that I got it from but hes normally to busy. So I'm up to having any one else doing right now.

C. Ludwig

iTrader: (27)

Does it just shut off or does it break up? Want to send me your map? ludwigmotorsports@insightbb.com

eo2am

iTrader: (9)

Its not break up the car runs clear under no load and lower boost if I slowly go in to boost and hit 6psi at 6000 or 3000rpm it just cuts off.

Its been a while since I played with the car and its still packed in the garage. So I could send you the map but it might be a few days.

C. Ludwig

iTrader: (27)

Ok. Do you have overboost protection enabled? It will act exactly like that when you hit boost cut. Easy to check and change in the software.

eo2am

iTrader: (9)

Huh? Dont know, I think I had that set to cut at 21 psi. But I'll have to reconnect to find out.