evot23

iTrader: (17)

sweet...looking good!

superdan50

iTrader: (3)

so i broke the lens plug out of the mold today. we didnt pour enough aluminum in it and so it didnt turn out quite right, due to not filling the entire mold. the good news is that it still had the stock curve that i want to achieve.

i cast the passenger side today too, and this time added more aluminum.

Laz93RX7

iTrader: (5)

looking good, keep it up. cant wait to rock a set of these.

superdan50

iTrader: (3)

i cant wait to be done!

also i will be getting the one i cast today, tomorrow. and if it comes out well i will begin polishing it this weekend.

superdan50

iTrader: (3)

the second plug turned out ok, and is usable. i will throw some pics up in a bit.

evot23

iTrader: (17)

looking forward to pics...this is gonna be good.

superdan50

iTrader: (3)

$lacker

iTrader: (9)

Cool... what's that? I was expecting something smoother

superdan50

iTrader: (3)

casting is never "smooth" (as far as i know), i will be polishing it. similar to polishing a UIM.

superdan50

iTrader: (3)

i got a chance to knock down some high spots on the lens plug. i didnt get as much done on it as i would have liked, the air compressor i was using wasnt up to the challenge. i did get some more fine tuning done on the shrouds as well, the air compressor did well there. i will be glassing after work tonight so tomorrow, or tuesday i can finish up the shroud plug. i will send it out this week to get the molds made. i want to have the lens plugs smoothed out and ready to polish by friday, so i can clean them up on saturday.

superdan50

iTrader: (3)

i got another layer of resin/glass filled in some low spots and got them closer to each other. im very close, i will wok on it more tomorrow. once they are identical i will put a layer of glass on for strength and finish them smooth. then its time to ship.

superdan50

iTrader: (3)

did more shaping on the shroud plugs tonight. i got them to sit just below the body lines (so the lens will match the body lines while over the shroud), i also i trimmed the edges back a bit so the lens will fit. tomorrow i will do some more fine shaping/filling. im on track to ship it out on monday.

kalinakona

iTrader: (5)

Pictures before you ship it out!

superdan50

iTrader: (3)

i will.

superdan50

iTrader: (3)

Jamesrterra

iTrader: (3)

sweet! its almost done!!!!!

David Hayes

iTrader: (6)

You've got some shaping and smoothing out to do Mr Dan.

evot23

iTrader: (17)

great progress

superdan50

iTrader: (3)

Why? JK. yeah, there is no smoothing done in these pics this is a rough fitment still.

superdan50

iTrader: (3)

so i have changed my mind as to the order im going to do things. i am going to work on the lens plugs this weekend once they are finished i will make a faux lens out of fiberglass. once the faux lenses are finished i will ship the plugs to my vacuum former and get those going. i will use the faux lenses to get the shroud fitment right. because of the difference in time to get the lenses and shrouds made sending the lens plugs off first means i will get them back about the same time.

Narfle

iTrader: (16)

3000gt much?

superdan50

iTrader: (3)

3000gts dont look like that. early they were popups, then 2 projectors behind a rounded lens. it is modeled on the Ferrari 360 as well as some custom shaping to fit right and follow the curves of the car.

armytim2002

Yeah I dont think that looks anything like the 3000gt. It looks great though! Cant wait to see finished product as well as how well they work illumination wise.

bally89

Im really looking forward to seeing the outcome of this - I need to go down the sleek route and am looking for an excuse to avoid the Re-A vacuum in my bank account. lol

evot23

iTrader: (17)

Avoid the vacuum, they ARE just lights after all. These are shaping up to be awesome.