pulstar pulse plugs
#1
Senior Member
Thread Starter
Join Date: Aug 2008
Location: campbell river british columbia
Posts: 349
Likes: 0
Received 0 Likes
on
0 Posts
pulstar pulse plugs
hey.. i was just curious if anyone has ever tried any of these plugs in there turbo rotary i was thinking about it but woould like some input into it first..
http://www.pulstar.com/applicationguide.cfm
i see some guys run plugs that have the same thread(14mm) and a little bit shorter of a reach (19mm instead of 21.5) and i see pulstar has the same plug and was wondering if its worth a shot to use them or not..
zxrazorxz
http://www.pulstar.com/applicationguide.cfm
i see some guys run plugs that have the same thread(14mm) and a little bit shorter of a reach (19mm instead of 21.5) and i see pulstar has the same plug and was wondering if its worth a shot to use them or not..
zxrazorxz
#3
I checked out an FB for sale, and was trying to help the guy get it started. Figured it was flooded and pulled a plug to check and found he tried some aftermarket plugs also. All 4 plugs had the gap smashed shut by the apex seals.
After seeing that, I would never never never try anything buy NGK.
After putting his old plugs in it still wouldn't start.....be the apex seals don't look very good!!
After seeing that, I would never never never try anything buy NGK.
After putting his old plugs in it still wouldn't start.....be the apex seals don't look very good!!
Thread
Thread Starter
Forum
Replies
Last Post
HalifaxFD
Canadian Forum
126
05-09-16 07:06 PM