JTP knuckles
10-16-13 | 10:44 AM
#26
can you post pics of the knuckles if you don't mind?
also if you have a newer rubber tie rod boot you can slip it towards the inner ball joint which will give you throw before the boot max's out..
also if you have a newer rubber tie rod boot you can slip it towards the inner ball joint which will give you throw before the boot max's out..
10-22-13 | 03:04 PM
#27
11-22-13 | 10:19 PM
#28
Just by this thread I would go with JTPs knuckles, he is obviously easy to get a hold of and very stand up guy. 100$ now could save so much trouble later
I just realized how old the OP is.. haha my bad
I just realized how old the OP is.. haha my bad
05-17-14 | 02:06 AM
#31
Alignment
First I had to recenter the rack making sure from center it's 1 1/2 turns left and right. Then remove/reinstall steering wheel so it's straight and adjust tie rods. In order to get a 0 toe angle I cut off 1/4 from each end of the inner tie rod.
Before tie rod cut (toe maxed out)
After
First I had to recenter the rack making sure from center it's 1 1/2 turns left and right. Then remove/reinstall steering wheel so it's straight and adjust tie rods. In order to get a 0 toe angle I cut off 1/4 from each end of the inner tie rod.
Before tie rod cut (toe maxed out)
After
