FD3s steering mods ?
#1
Junior Member
Thread Starter
Join Date: Feb 2009
Location: ireland
Posts: 26
Likes: 0
Received 0 Likes
on
0 Posts
FD3s steering mods ?
What are people using to get more steering lock from there FD3s ? inner and outer tie rods with spacers ? knuckle mods on the hub ?
Ive 18x9 et25 for the road and 17x9 et25 for the track for the front and want to know whats the best way to get the most/best steering mods for my car
Ive 18x9 et25 for the road and 17x9 et25 for the track for the front and want to know whats the best way to get the most/best steering mods for my car
#2
Senior Member
iTrader: (5)
Join Date: Jan 2002
Location: edmonton alberta
Posts: 345
Likes: 0
Received 0 Likes
on
0 Posts
I have done both. i have modded my steering knuckles and also have JIC inner and outer tirods with spacer.
this seems to be a happy combo. i have 17x9 with a 22 offset and i have to run 5mm spacers to keep from rubbing on frame.
this seems to be a happy combo. i have 17x9 with a 22 offset and i have to run 5mm spacers to keep from rubbing on frame.
#4
Senior Member
iTrader: (5)
Join Date: Jan 2002
Location: edmonton alberta
Posts: 345
Likes: 0
Received 0 Likes
on
0 Posts
i have shortened the knuckles by 20mm and have actually raced this car road racing and time attack. other than the steering being a bit stiffer it handles VERY well.
i have not noticed any pump steer.
i have not noticed any pump steer.
#5
Junior Member
Thread Starter
Join Date: Feb 2009
Location: ireland
Posts: 26
Likes: 0
Received 0 Likes
on
0 Posts
Ive got two hubs here now so will give it a go , also got some outer tie rods with bump steer correction so will get them all on it al the same time and see how it goes
Thread
Thread Starter
Forum
Replies
Last Post
Skeese
Adaptronic Engine Mgmt - AUS
65
03-28-17 03:30 PM
ncds_fc
2nd Generation Specific (1986-1992)
17
09-10-15 03:52 AM