Thanks Everyone!
#51
Crash Auto?Fix Auto.
iTrader: (3)
Aaron,
The motor in my car is seized. I tried to bump start it with my drill but the engine in the drill's not got enough ***** to spin it over. I'm thinking I need to re wind the engine for more torque to spin the motor over and crack the seals loose. Will that work? Or should I power the I use several hamsters and wheels to generate some juice for the drill engine????
The motor in my car is seized. I tried to bump start it with my drill but the engine in the drill's not got enough ***** to spin it over. I'm thinking I need to re wind the engine for more torque to spin the motor over and crack the seals loose. Will that work? Or should I power the I use several hamsters and wheels to generate some juice for the drill engine????
#54
Rotary Dynamics
iTrader: (5)
Join Date: Aug 2005
Location: Stoney Creek,Ontario
Posts: 610
Likes: 0
Received 0 Likes
on
0 Posts
If the hamsters aren't moving fast enough, let them drink some NOS (energy drink).
Then once the engine un-seizes, you should really switch over to spraying NOS instead of water/alcohol! +100 hp for sure.
Then once the engine un-seizes, you should really switch over to spraying NOS instead of water/alcohol! +100 hp for sure.
#55
Rotoholic Moderookie
iTrader: (4)
Some ATF aughta do it
I just brought my car out of storage. I've topped up the blinker fluid but I'm thinking of going with new Muffler Bearings when I install my new 8" cherry bomb. I had to cut the bumper a bit to make it fit, the plastic sits right on the muffler, but what's the worst that can happen?
On that note, anyone know a good place to get JDM muffler bearings ? I hear they're like totally way better than the regular ones. I need them for drifting, so keep that in mind.
Doug down at Rx7Heaven recommends that I get my valves and lifters replaced in my 12a. He must know what he's talking about, so I'm going to have him do the work. He says it should only cost about $2k, but it's worth it for the number of miles per hour my car will gain.
I wonder if CP Racing would do it cheaper?
Jon
I just brought my car out of storage. I've topped up the blinker fluid but I'm thinking of going with new Muffler Bearings when I install my new 8" cherry bomb. I had to cut the bumper a bit to make it fit, the plastic sits right on the muffler, but what's the worst that can happen?
On that note, anyone know a good place to get JDM muffler bearings ? I hear they're like totally way better than the regular ones. I need them for drifting, so keep that in mind.
Doug down at Rx7Heaven recommends that I get my valves and lifters replaced in my 12a. He must know what he's talking about, so I'm going to have him do the work. He says it should only cost about $2k, but it's worth it for the number of miles per hour my car will gain.
I wonder if CP Racing would do it cheaper?
Jon