Still flooding
12-01-05, 04:33 PM
#1
Canadian Boost
Thread Starter
iTrader: (3)
Join Date: Nov 2005
Location: Ottawa, Canada
Posts: 868
Likes: 0
Received 0 Likes
on
0 Posts
Still flooding
My engine is still flooding. It's not as bad as before,but now the leading plugs get wet with fuel (there not soaked AND no i'm giving it gas when i start it). So i'm guessing it's those two seals and o-ring that are causing the problem. Any advice on further steps ?
12-01-05, 04:53 PM
#2
GrapefruitRacing?
Join Date: Apr 2003
Location: PartSource
Posts: 2,155
Likes: 0
Received 0 Likes
on
0 Posts
Well, if it's only fuel and not coolant, then you might wanna make sure your getting spark.
I'd come check it out tonight after work but I have no clue where you live and I'm also not gonna take the bus
You know your getting fuel so...
Take the leading plug wires off, use some known working plugs and ground them to the engine or chassis. Then get a friend to turn the engine over and see if you get a strong spark.
I'd come check it out tonight after work but I have no clue where you live and I'm also not gonna take the bus
You know your getting fuel so...
Take the leading plug wires off, use some known working plugs and ground them to the engine or chassis. Then get a friend to turn the engine over and see if you get a strong spark.
Last edited by RXciting; 12-01-05 at 04:55 PM.
Thread
Thread Starter
Forum
Replies
Last Post
Jeff20B
1st Generation Specific (1979-1985)
73
09-16-18 07:16 PM
FbFuninthesun
New Member RX-7 Technical
3
10-06-15 08:03 AM
PinkRacer
2nd Generation Specific (1986-1992)
43
10-01-15 09:13 AM
Adaptronic 1280s Hot Start 3 Rotor 20b RX7
Monsterbox
Adaptronic Engine Mgmt - AUS
5
09-11-15 03:29 PM