Seafoam in canada
#5
Retired Moderator, RIP
iTrader: (142)
Joined: Sep 2005
Posts: 25,581
Likes: 133
From: Smiths Falls.(near Ottawa!.Mapquest IT!)
NAPA in Smiths Falls..It's So Small..(HOW small is it?)..it's so small They couldn't fit a 1/64 Model scale replica Nascar in thier "picture Window"!...(but Kevin Comes through..Napa..Who'd a Thunk it?)
#6
Thread Starter
1/1 scale Hot Wheels
iTrader: (1)
Joined: Feb 2006
Posts: 1,660
Likes: 5
From: winnipeg, Manitoba
found a NAPA at lunch today and picked up bottle .... half into the '79 and half into the '89
will report back on what happens later after a few redlines down the 401 tonight and tomorrow.
will report back on what happens later after a few redlines down the 401 tonight and tomorrow.
Trending Topics
#8
Thread Starter
1/1 scale Hot Wheels
iTrader: (1)
Joined: Feb 2006
Posts: 1,660
Likes: 5
From: winnipeg, Manitoba
Originally Posted by ourxseven
found a NAPA at lunch today and picked up bottle .... half into the '79 and half into the '89
will report back on what happens later after a few redlines down the 401 tonight and tomorrow.
will report back on what happens later after a few redlines down the 401 tonight and tomorrow.
well ..... my recent warm start problems in the '89 vert are gone . coincidence ?, or possibly helped the injectors ? .... no change noticed to the idle ( still smooth) or pull above 5K (good and strong) though.
too soon to tell about the '79 .... i should have drove it BEFORE I took the '89 out. will try next week.
#9
Rotoholic Moderookie
iTrader: (4)
Joined: May 2002
Posts: 5,962
Likes: 33
From: Ottawa, Soviet Canuckistan
I ran one bottle per tank through 3 tanks on my trip to Pine Plains, NY and though the effect was noticable to me, it was very minimal on my car. I'm thinking that with a newly rebuilt carb there wasn't much gunk in there to clean, and my engine's internals are probably about as good as they're gonna get for a comp test showing 7.2kg/cm2 all around, lol. (it may be low, but at least all rotor faces are exactly equal. 7.2@300rpm rear rotor and 6.9@250rpm front rotor.. time for a rebuild but at least she won't just up and kak on me).
Jon
Jon
Thread
Thread Starter
Forum
Replies
Last Post
distr0
Canadian Forum
3
10-07-15 09:17 AM
23Racer
Race Car Tech
1
09-21-15 11:48 AM