Ottawa Area : TheWird is Coming!
06-19-12, 11:02 PM
#26
Works for me, I know I'm busy the weekend before and weekend after. I won't really have room for everyone to spend the night unless they someone is cool with sleeping on the floor haha Ill only have a spare bed and a pull out futon by the 7th, and a couch. Marco, shoot me a pm, your more then welcome to the spare bed as you are the tuner, dave andrew and fred, we will have to see how the day turns out, I'm hoping we can plan maybe 2 per day or whatever works best?
I'm hoping the internet will be setup for then :s
I'm hoping the internet will be setup for then :s
06-19-12, 11:06 PM
#27
Retired Moderator, RIP
Thread Starter
iTrader: (142)
Join Date: Sep 2005
Location: Smiths Falls.(near Ottawa!.Mapquest IT!)
Posts: 25,581
Likes: 0
Received 131 Likes
on
114 Posts
I do not know IF I am driveable since the whole engine/intake/fuel/exhaust was swapped out.
I am still pickin at it.BUT by next week it should be OK to test out.
I am still pickin at it.BUT by next week it should be OK to test out.
06-21-12, 02:16 PM
#28
SABBC
iTrader: (4)
Join Date: Feb 2009
Location: hootawuah, On
Posts: 255
Likes: 0
Received 0 Likes
on
0 Posts
if you live in hawksbury, Ottawa i about an hour from there. i wont need to sleep over, just let me know around what time it's gonna be my turn and i'll be there way in advance
06-22-12, 11:16 AM
#30
Retired Moderator, RIP
Thread Starter
iTrader: (142)
Join Date: Sep 2005
Location: Smiths Falls.(near Ottawa!.Mapquest IT!)
Posts: 25,581
Likes: 0
Received 131 Likes
on
114 Posts
I think that you two should get tuned at the same place.Worse case scenario Marco and I will hop in the Pontiac Montana( I call it Tony..lol) and come up.
My car may not be ok to drive.Marco would have to set a map in it..I think.
anyways Gotta go..Sun isn't melting pavement today,so that means it is "work time"!
My car may not be ok to drive.Marco would have to set a map in it..I think.
anyways Gotta go..Sun isn't melting pavement today,so that means it is "work time"!
06-22-12, 09:52 PM
#31
Full Member
Join Date: Dec 2003
Location: N/A
Posts: 88
Likes: 0
Received 0 Likes
on
0 Posts
I am up for it i think my Car is Ready lol
anyone have the Junction piping from greedy Compression Tube to Trust Intercooler ?
been looking for one :d
see attached
I am in the Aylmer/Ottawa area
anyone have the Junction piping from greedy Compression Tube to Trust Intercooler ?
been looking for one :d see attached
I am in the Aylmer/Ottawa area
06-22-12, 10:21 PM
#32
Retired Moderator, RIP
Thread Starter
iTrader: (142)
Join Date: Sep 2005
Location: Smiths Falls.(near Ottawa!.Mapquest IT!)
Posts: 25,581
Likes: 0
Received 131 Likes
on
114 Posts
does it have to be "that" pipe?
I got some IC pipe here..2.75 and 3 inch.
Get a hold of Marco( TheWird) for info.
If you can touch base with AMT-T also,that may work for you location wise..I'm pluggin away on mine here,but AMT-T and Galvatron are close to each other,so maybe you can join up with them?.
I got some IC pipe here..2.75 and 3 inch.
Get a hold of Marco( TheWird) for info.
If you can touch base with AMT-T also,that may work for you location wise..I'm pluggin away on mine here,but AMT-T and Galvatron are close to each other,so maybe you can join up with them?.
06-27-12, 08:55 AM
#34
Make It Happen!
iTrader: (11)
Join Date: Jun 2010
Location: Ontario, Canada
Posts: 522
Likes: 0
Received 0 Likes
on
0 Posts
We are a week and a half away from this. Can we start planning where we are going to get this done/ who will get tuned which day. Marco? a little input here? (you are the tuner)
correct me if i'm wrong but so far we have:
>misterstyx69
>AmT_T --> me
>galvatron10000
>BassAddicted
correct me if i'm wrong but so far we have:
>misterstyx69
>AmT_T --> me
>galvatron10000
>BassAddicted
06-29-12, 10:37 PM
#36
Full Member
Join Date: Dec 2003
Location: N/A
Posts: 88
Likes: 0
Received 0 Likes
on
0 Posts
Hey all,
Bad news somewhat lol i will have to call it quits for this .... since i cannot for the life of Me figure out why my Turbo kicks in when it wants... no vacuum leaks, vacuum chamber is fine, actuator is firmly in place. maybe when doing my silicone hose change i change a smaller diameter Hose for a bigger one somewhere for ya..
Sorry :S
Bad news somewhat lol i will have to call it quits for this .... since i cannot for the life of Me figure out why my Turbo kicks in when it wants... no vacuum leaks, vacuum chamber is fine, actuator is firmly in place. maybe when doing my silicone hose change i change a smaller diameter Hose for a bigger one somewhere for ya..
Sorry :S
06-30-12, 01:32 AM
#39
Make It Happen!
iTrader: (11)
Join Date: Jun 2010
Location: Ontario, Canada
Posts: 522
Likes: 0
Received 0 Likes
on
0 Posts
I will get him to PM Fred, Dave and yourself his address, I believe Fred is prepared to meet at Brent's as well.
He has a way better place for doing some pulls.
I figure we make a day of it, I'll bring some bbq stuff.
Dave and marco, Will you be coming on the sat (7) or sunday (8)?
Andrew
06-30-12, 10:59 AM
#40
Full Member
Join Date: Dec 2003
Location: N/A
Posts: 88
Likes: 0
Received 0 Likes
on
0 Posts
06-30-12, 02:30 PM
#42
SABBC
iTrader: (4)
Join Date: Feb 2009
Location: hootawuah, On
Posts: 255
Likes: 0
Received 0 Likes
on
0 Posts
I am planning on getting tuned at Brent's. "Itsfun"
I will get him to PM Fred, Dave and yourself his address, I believe Fred is prepared to meet at Brent's as well.
He has a way better place for doing some pulls.
I figure we make a day of it, I'll bring some bbq stuff.
Dave and marco, Will you be coming on the sat (7) or sunday (8)?
Andrew
I will get him to PM Fred, Dave and yourself his address, I believe Fred is prepared to meet at Brent's as well.
He has a way better place for doing some pulls.
I figure we make a day of it, I'll bring some bbq stuff.
Dave and marco, Will you be coming on the sat (7) or sunday (8)?
Andrew
i talk to andrew and i will also meet at Brent, i got
and will bring some food for a BBQ, saturday would be better, but it more up to you guys, i'm free all weekend
07-01-12, 12:34 AM
#45
Retired Moderator, RIP
Thread Starter
iTrader: (142)
Join Date: Sep 2005
Location: Smiths Falls.(near Ottawa!.Mapquest IT!)
Posts: 25,581
Likes: 0
Received 131 Likes
on
114 Posts
Update for me: Still pluggin away.
I think that you guys could get done First on Saturday and then Marco could swing by to my place on Sunday.If My car is ready on Saturday I could make it up there to watch.If not I have an extra day to work on it.
I'm doing the Two steps forward Three steps back Dance with this thing..But I got all the welding completed and just have to hang the exhaust.
Then wire the fuse block,supply the starter/alt,get power to gauges and make sure that the 12 volts isn't draining.
Funny how you think it will only take a day or two and it ends up being Weeks.
I think that you guys could get done First on Saturday and then Marco could swing by to my place on Sunday.If My car is ready on Saturday I could make it up there to watch.If not I have an extra day to work on it.
I'm doing the Two steps forward Three steps back Dance with this thing..But I got all the welding completed and just have to hang the exhaust.
Then wire the fuse block,supply the starter/alt,get power to gauges and make sure that the 12 volts isn't draining.
Funny how you think it will only take a day or two and it ends up being Weeks.
07-01-12, 08:25 AM
#46
SABBC
iTrader: (4)
Join Date: Feb 2009
Location: hootawuah, On
Posts: 255
Likes: 0
Received 0 Likes
on
0 Posts
worst case senario, come to my place friday. i finish work at 3pm, we go to fast and furious meeting on friday night, come back, go to bed, then in the morning we gonna go meet the other guys at Brent.( you can leave your car at my place, then come back pick it up when you go see Dave since i live in the middle) you know me Marco, it takes a lot to worry me. lol anyway keep that in mind, my home is always open to you ( at the same time we can do some tuning as we drive around 
)
)
07-01-12, 04:14 PM
#47
Full Member
Join Date: Dec 2003
Location: N/A
Posts: 88
Likes: 0
Received 0 Likes
on
0 Posts
worst case senario, come to my place friday. i finish work at 3pm, we go to fast and furious meeting on friday night, come back, go to bed, then in the morning we gonna go meet the other guys at Brent.( you can leave your car at my place, then come back pick it up when you go see Dave since i live in the middle) you know me Marco, it takes a lot to worry me. lol anyway keep that in mind, my home is always open to you ( at the same time we can do some tuning as we drive around )
) you speak of Merivale?