Canadian Forum Canadian users, post event and club info here.

oops :/

Thread Tools
 
Search this Thread
 
Old 11-29-09 | 04:43 PM
  #1  
Bwek's Avatar
Thread Starter
High Comp Booster

iTrader: (4)
 
Joined: Apr 2009
Posts: 1,907
Likes: 0
From: Oakville, Ontario
oops :/



I managed to crack my rad shortly after it wasn't overheating the motor anyways....

this was after a hard drive of 15 mins of being in constant boost
Old 11-29-09 | 07:16 PM
  #2  
rotarygreg's Avatar
Full Member
 
Joined: Mar 2009
Posts: 106
Likes: 0
From: guelph, ontario
Originally Posted by Bwek
I managed to crack my rad shortly after it wasn't overheating the motor anyways....

this was after a hard drive of 15 mins of being in constant boost
thats evil! awesome man. too bad about the rad but as long as you didnt cook the engine, no biggy right?

a few years ago i was all into suzuki swift GT(i)s and we had this big weekend long meet in toronto where all the quebec guys came out. 90% of them were running turbos and some really crazy numbers as far as boost goes. they arrived at night, right off the highway, and you could see the one guys manifold glowing red right through the grill. also, if i recall correctly his bumper melted slightly after the car was sittign still for a while without air flow pulling all that heat away from the bumper. lol. nothing like a couple hours on the highway at high speed with really low gearing to make things really cherry. haha.

Last edited by rotarygreg; 11-29-09 at 07:22 PM.
Old 11-29-09 | 09:34 PM
  #3  
Bwek's Avatar
Thread Starter
High Comp Booster

iTrader: (4)
 
Joined: Apr 2009
Posts: 1,907
Likes: 0
From: Oakville, Ontario
ya i didn't really care about the rad as long as the motor was good to go lol forgot to mention i got my ebc green stuffs smoking too....

i used some plumbers goop on the side of the road with black tape to hold it in place and was good to go! lmao
Old 11-29-09 | 10:21 PM
  #4  
rotarygreg's Avatar
Full Member
 
Joined: Mar 2009
Posts: 106
Likes: 0
From: guelph, ontario
Originally Posted by Bwek
ya i didn't really care about the rad as long as the motor was good to go lol forgot to mention i got my ebc green stuffs smoking too....

i used some plumbers goop on the side of the road with black tape to hold it in place and was good to go! lmao
may i ask what you were doing/where you were doing it to cause such destruction? or are you not a liberty to say? lol.
Old 11-29-09 | 10:24 PM
  #5  
Bwek's Avatar
Thread Starter
High Comp Booster

iTrader: (4)
 
Joined: Apr 2009
Posts: 1,907
Likes: 0
From: Oakville, Ontario
Its not for from guelph maybe a 20 minute drive i'd rather not say on a forum i don't want it to turn into another forks of the credit with cops all the time

I'd be willing to show people only if they dont post where it is

All i'll say is that i have a route that starts in mississauga and it ends up in hamilton using all back roads with lots of straights and twisties it takes about 2 hrs
Old 11-29-09 | 11:29 PM
  #6  
Syritis's Avatar
Can Post Only in New Member Section
iTrader: (2)
 
Joined: Jul 2004
Posts: 930
Likes: 0
From: Calgary, Canada
i'm a little confused with the picture? is that the hot side of your turbo glowing pink?
Old 11-30-09 | 12:20 AM
  #7  
Bwek's Avatar
Thread Starter
High Comp Booster

iTrader: (4)
 
Joined: Apr 2009
Posts: 1,907
Likes: 0
From: Oakville, Ontario
yep and the downpipe behind it
Related Topics
Thread
Thread Starter
Forum
Replies
Last Post
toplessFC3Sman
2nd Generation Specific (1986-1992)
6
03-20-18 02:54 PM
Bruhman
Race Car Tech
2
12-30-02 10:34 PM




All times are GMT -5. The time now is 07:23 PM.