Looking for a rotary tuner..
#1
Newbie
Thread Starter
Join Date: Jun 2005
Location: Toronto, Canada
Posts: 2
Likes: 0
Received 0 Likes
on
0 Posts
Looking for a rotary tuner..
Hey guys,
I was wondering if you could lend a helping hand and recommend a rotary tuner who can dyno tune a Greddy Turbo'ed RX8 w/ Microtech. Any feedback would be great!
I was wondering if you could lend a helping hand and recommend a rotary tuner who can dyno tune a Greddy Turbo'ed RX8 w/ Microtech. Any feedback would be great!
#5
Newbie
Thread Starter
Join Date: Jun 2005
Location: Toronto, Canada
Posts: 2
Likes: 0
Received 0 Likes
on
0 Posts
I am a member of the RX8 board and one of 2 tuned Greddy Turbo'ed RX8's in Toronto as far as I know.
I had tuning done by Paul at Neetronics this past August with the blue emanage that comes with the system. Because of the emanage, there are extreme limitations. With the stock greddy setup, there is no ignition timing, no control of variable intake ports.... We still managed to hit 267 whp ..on his clayton dyno at 7.8 psi.
I am currently looking to upgrade to a Microtech setup. Mazsport in Florida has modified a Microtech ecu (don't know which one) with a plug and play harness to work with the RX8. I was hoping to find a specialty rotary tuner to work on the tuning this time around.
I had tuning done by Paul at Neetronics this past August with the blue emanage that comes with the system. Because of the emanage, there are extreme limitations. With the stock greddy setup, there is no ignition timing, no control of variable intake ports.... We still managed to hit 267 whp ..on his clayton dyno at 7.8 psi.
I am currently looking to upgrade to a Microtech setup. Mazsport in Florida has modified a Microtech ecu (don't know which one) with a plug and play harness to work with the RX8. I was hoping to find a specialty rotary tuner to work on the tuning this time around.
Thread
Thread Starter
Forum
Replies
Last Post
datfast1
Old School and Other Rotary
18
06-20-19 10:53 PM
Under PSI
3rd Generation Specific (1993-2002)
19
09-23-15 11:47 PM