Giving back, rebuild's for free
#157
Friendly stalker
Wow I'm glad to see this is taking off. I know engines were in short supply for the first round.
It was an excellent learning experience. I learned a ton thanks to Jim.
It was an excellent learning experience. I learned a ton thanks to Jim.
#161
Jim, awesome thing you're doing here for all the young guys.
For everyone that follows CSCS time attack you will know my white RX-7. Jim's been helping me out now for 2 years with the motor in my time attack car. Jim has a ton of knowledge and experience when it comes to these motors.
Video of the motor on the dyno at the beginning of this season. Tuned by Sasha at Onpoint Dyno. Instagram
Made 365whp at 14psi on a TO4s Turbonetics turbo.
Andrew.
For everyone that follows CSCS time attack you will know my white RX-7. Jim's been helping me out now for 2 years with the motor in my time attack car. Jim has a ton of knowledge and experience when it comes to these motors.
Video of the motor on the dyno at the beginning of this season. Tuned by Sasha at Onpoint Dyno. Instagram
Made 365whp at 14psi on a TO4s Turbonetics turbo.
Andrew.
#163
Retired Moderator, RIP
iTrader: (142)
Join Date: Sep 2005
Location: Smiths Falls.(near Ottawa!.Mapquest IT!)
Posts: 25,581
Likes: 0
Received 133 Likes
on
114 Posts
Just wondering if anyone has a pricing of all parts(preferably a full total) associated with the latest list that JDK posted for the rebuild in order to give guys a rough idea of costs.
This List:
N304-11-300A 3mm apex seal- you need 6
1757-11-304 3mm apex seal spring- you need 6
N351-11-COOC 2mm apex seal-you need 6
N326-11-CO4A 2mm apex seal spring small -you need 6
N326-11-CO6C 2mm apex seal spring large -you need 6
N326-11-C20A 2mm Corner seal Stock-you need 12
NFO1-11-C24 2&3mm corner seal spring All- you need 12
1011-11-321 3mm corner seal All-you need 12
N326-11-C17 Side seal spring All- you need 12
N3Z1-11S10A Oil control ring set -2 per set All- you need 4 sets
0820-11-341 Control O-Ring- inner green All- you need 4
8341-11-343 Control O-Ring- outer black All- you need 4
N225-11-351 Control ring spring-inner blue All- you need 2
N225-11-361 Control ring spring-inner cream All- you need 2
1011-11-353A Control ring spring-outer-blue All- you need 2
1011-11-363A Control ring spring-outer-cream All- you need 2
N326-10-B71A Coolant seals- Orange All-you need 4
N326-10-B72 Coolant seals-Black All- you need 4
N3A1-10-B73 Dowel O -Rings All- you need 4
0813-10-555A Rear Stat. Gear O-ring All-you need 1
9954-10-1105 Pulley Hub bolt O-ring All-you need 1
N326-10-C15 Front cover back up ring FD-you need 1
N231-10-174 Front cover O-Ring Both FD&FC-you need-1
0839-10-455 Tension bolt seals All- you need 17
N3A1-10-502 Front cover gasket-FD FD
1668-10-556A Rear Main Seal All
0820-10-605 Front Main Seal All
N386-15-162 Water Pump housing gasket-FD FD&FC 86-95
N2Y0-10-502 Front Cover Gasket-FC 86-88 FC
N2YO-15-162 Water Pump housing Gasket FB-FC 74-85
n3ya-10-427 FD oil pan gasket 93-up
This List:
N304-11-300A 3mm apex seal- you need 6
1757-11-304 3mm apex seal spring- you need 6
N351-11-COOC 2mm apex seal-you need 6
N326-11-CO4A 2mm apex seal spring small -you need 6
N326-11-CO6C 2mm apex seal spring large -you need 6
N326-11-C20A 2mm Corner seal Stock-you need 12
NFO1-11-C24 2&3mm corner seal spring All- you need 12
1011-11-321 3mm corner seal All-you need 12
N326-11-C17 Side seal spring All- you need 12
N3Z1-11S10A Oil control ring set -2 per set All- you need 4 sets
0820-11-341 Control O-Ring- inner green All- you need 4
8341-11-343 Control O-Ring- outer black All- you need 4
N225-11-351 Control ring spring-inner blue All- you need 2
N225-11-361 Control ring spring-inner cream All- you need 2
1011-11-353A Control ring spring-outer-blue All- you need 2
1011-11-363A Control ring spring-outer-cream All- you need 2
N326-10-B71A Coolant seals- Orange All-you need 4
N326-10-B72 Coolant seals-Black All- you need 4
N3A1-10-B73 Dowel O -Rings All- you need 4
0813-10-555A Rear Stat. Gear O-ring All-you need 1
9954-10-1105 Pulley Hub bolt O-ring All-you need 1
N326-10-C15 Front cover back up ring FD-you need 1
N231-10-174 Front cover O-Ring Both FD&FC-you need-1
0839-10-455 Tension bolt seals All- you need 17
N3A1-10-502 Front cover gasket-FD FD
1668-10-556A Rear Main Seal All
0820-10-605 Front Main Seal All
N386-15-162 Water Pump housing gasket-FD FD&FC 86-95
N2Y0-10-502 Front Cover Gasket-FC 86-88 FC
N2YO-15-162 Water Pump housing Gasket FB-FC 74-85
n3ya-10-427 FD oil pan gasket 93-up
Last edited by misterstyx69; 11-11-14 at 12:49 AM.
#164
Just wondering if anyone has a pricing of all parts(preferably a full total) associated with the latest list that JDK posted for the rebuild in order to give guys a rough idea of costs.
This List:
N304-11-300A 3mm apex seal- you need 6
1757-11-304 3mm apex seal spring- you need 6
N351-11-COOC 2mm apex seal-you need 6
N326-11-CO4A 2mm apex seal spring small -you need 6
N326-11-CO6C 2mm apex seal spring large -you need 6
N326-11-C20A 2mm Corner seal Stock-you need 12
NFO1-11-C24 2&3mm corner seal spring All- you need 12
1011-11-321 3mm corner seal All-you need 12
N326-11-C17 Side seal spring All- you need 12
N3Z1-11S10A Oil control ring set -2 per set All- you need 4 sets
0820-11-341 Control O-Ring- inner green All- you need 4
8341-11-343 Control O-Ring- outer black All- you need 4
N225-11-351 Control ring spring-inner blue All- you need 2
N225-11-361 Control ring spring-inner cream All- you need 2
1011-11-353A Control ring spring-outer-blue All- you need 2
1011-11-363A Control ring spring-outer-cream All- you need 2
N326-10-B71A Coolant seals- Orange All-you need 4
N326-10-B72 Coolant seals-Black All- you need 4
N3A1-10-B73 Dowel O -Rings All- you need 4
0813-10-555A Rear Stat. Gear O-ring All-you need 1
9954-10-1105 Pulley Hub bolt O-ring All-you need 1
N326-10-C15 Front cover back up ring FD-you need 1
N231-10-174 Front cover O-Ring Both FD&FC-you need-1
0839-10-455 Tension bolt seals All- you need 17
N3A1-10-502 Front cover gasket-FD FD
1668-10-556A Rear Main Seal All
0820-10-605 Front Main Seal All
N386-15-162 Water Pump housing gasket-FD FD&FC 86-95
N2Y0-10-502 Front Cover Gasket-FC 86-88 FC
N2YO-15-162 Water Pump housing Gasket FB-FC 74-85
n3ya-10-427 FD oil pan gasket 93-up
This List:
N304-11-300A 3mm apex seal- you need 6
1757-11-304 3mm apex seal spring- you need 6
N351-11-COOC 2mm apex seal-you need 6
N326-11-CO4A 2mm apex seal spring small -you need 6
N326-11-CO6C 2mm apex seal spring large -you need 6
N326-11-C20A 2mm Corner seal Stock-you need 12
NFO1-11-C24 2&3mm corner seal spring All- you need 12
1011-11-321 3mm corner seal All-you need 12
N326-11-C17 Side seal spring All- you need 12
N3Z1-11S10A Oil control ring set -2 per set All- you need 4 sets
0820-11-341 Control O-Ring- inner green All- you need 4
8341-11-343 Control O-Ring- outer black All- you need 4
N225-11-351 Control ring spring-inner blue All- you need 2
N225-11-361 Control ring spring-inner cream All- you need 2
1011-11-353A Control ring spring-outer-blue All- you need 2
1011-11-363A Control ring spring-outer-cream All- you need 2
N326-10-B71A Coolant seals- Orange All-you need 4
N326-10-B72 Coolant seals-Black All- you need 4
N3A1-10-B73 Dowel O -Rings All- you need 4
0813-10-555A Rear Stat. Gear O-ring All-you need 1
9954-10-1105 Pulley Hub bolt O-ring All-you need 1
N326-10-C15 Front cover back up ring FD-you need 1
N231-10-174 Front cover O-Ring Both FD&FC-you need-1
0839-10-455 Tension bolt seals All- you need 17
N3A1-10-502 Front cover gasket-FD FD
1668-10-556A Rear Main Seal All
0820-10-605 Front Main Seal All
N386-15-162 Water Pump housing gasket-FD FD&FC 86-95
N2Y0-10-502 Front Cover Gasket-FC 86-88 FC
N2YO-15-162 Water Pump housing Gasket FB-FC 74-85
n3ya-10-427 FD oil pan gasket 93-up
#165
I will be offering to do a few sessions for 2015 with one being arranged now:
ScottyR has decided to pull his engine and do a 3 step engine rebuild session, time will be determined in a week or so but most likely late January early February. If you have interest in attending “All” three sessions, please post here....again please don’t post if your not willing to attend all three dates.
New attendees will have preference.
1: open and inspect- 1-2 hours
2: clean and spec- 1-2 hours
3: build- 3-4 hours
ScottyR has decided to pull his engine and do a 3 step engine rebuild session, time will be determined in a week or so but most likely late January early February. If you have interest in attending “All” three sessions, please post here....again please don’t post if your not willing to attend all three dates.
New attendees will have preference.
1: open and inspect- 1-2 hours
2: clean and spec- 1-2 hours
3: build- 3-4 hours
#172
Rotary Freak
I'd like to attend.