freshly rebuilt 92 Efini Type-R
10-22-12 | 09:27 PM
#1
Thread Starter
Joined: Apr 2007
Posts: 1,502
Likes: 0
From: St. Thomas
freshly rebuilt 92 Efini Type-R
I just finished my FD last week , I did a med streetport ,ep2a exhaust , its running awesome, Put it on the road today and put on 75kms so far
10-23-12 | 10:40 AM
#3
looks great,
one thing I noticed is you have the BOV on the turbo intake pipe. It really does nothing there.
Any pressurized air will go out the filter ,as there is a huge escape.
The blow off valve ( BOV) is designed to relieve pressure in a closed circuit . For example between turbo and throttle body . ( can be turbo to intercooler side or intercooler to throttle body side, that is another discussion )
Great its back on the road.
one thing I noticed is you have the BOV on the turbo intake pipe. It really does nothing there.
Any pressurized air will go out the filter ,as there is a huge escape.
The blow off valve ( BOV) is designed to relieve pressure in a closed circuit . For example between turbo and throttle body . ( can be turbo to intercooler side or intercooler to throttle body side, that is another discussion )
Great its back on the road.
10-23-12 | 01:13 PM
#5
looks great,
one thing I noticed is you have the BOV on the turbo intake pipe. It really does nothing there.
Any pressurized air will go out the filter ,as there is a huge escape.
The blow off valve ( BOV) is designed to relieve pressure in a closed circuit . For example between turbo and throttle body . ( can be turbo to intercooler side or intercooler to throttle body side, that is another discussion )
Great its back on the road.
one thing I noticed is you have the BOV on the turbo intake pipe. It really does nothing there.
Any pressurized air will go out the filter ,as there is a huge escape.
The blow off valve ( BOV) is designed to relieve pressure in a closed circuit . For example between turbo and throttle body . ( can be turbo to intercooler side or intercooler to throttle body side, that is another discussion )
Great its back on the road.
-Geoff
10-23-12 | 01:33 PM
#6
The BOV isn't attached to the intake pipe. I have the same intake and BOV. The GReddy BOV has a pipe that runs down from that position to the Y-Pipe and connects where the old CRV was piped into. I could see how it would look it's connected there, but it's merely the mounting kit.
-Geoff
-Geoff
Trending Topics
Thread
Thread Starter
Forum
Replies
Last Post
mulcryant
2nd Generation Specific (1986-1992)
10
09-09-15 06:24 PM