comments needed to a blown rotary - toronto
#1
comments needed to a blown rotary - toronto
I got my 90's non-turbo engine blown..... need a swap now... any good suggestion (and rough price) in GTA, or shipping from somewhere else and get the job done in tor?
also, is there anything need to pay attn to if i decided on converting it to a turbo one? (like un-cutted wire, ECU, trans. incl.)
thanks in advance
also, is there anything need to pay attn to if i decided on converting it to a turbo one? (like un-cutted wire, ECU, trans. incl.)
thanks in advance
#2
Likes to swear....alot
iTrader: (3)
Joined: Dec 2002
Posts: 3,791
Likes: 3
From: Kitchener Ontario Canada
I have access to a couple used S5 N/A motors. If you want a replacement motor put in your car to get you driving for the summer than let me know. I'll install it as well for a very resonable price.
#7
Originally Posted by richmondhill
I got my 90's non-turbo engine blown..... need a swap now... any good suggestion (and rough price) in GTA, or shipping from somewhere else and get the job done in tor?
also, is there anything need to pay attn to if i decided on converting it to a turbo one? (like un-cutted wire, ECU, trans. incl.)
thanks in advance
also, is there anything need to pay attn to if i decided on converting it to a turbo one? (like un-cutted wire, ECU, trans. incl.)
thanks in advance
Trending Topics
#8
actually it is the second time to my rx-7... my engine was gone once 4 yrs ago, i got it replaced, and the rebuilt lasted for 2 yrs.... a tech looked up for me, fuel injector gone and gas got into the engine..... too bad...
#9
Retired Moderator, RIP
iTrader: (142)
Joined: Sep 2005
Posts: 25,581
Likes: 133
From: Smiths Falls.(near Ottawa!.Mapquest IT!)
Ya ..you can PM ..JOE..or..he has a contact # 519-363-6234 ..I met him Friday..He knows his stuff and will treat you right..I know he will do swaps too..and he just recent started up his business.. www.rpmperformance.ca I believe..You may want to check that out too..Best of Luck to ya ..get that car goin..There are alot of meets comin up this summer..you can make some friends,have a little fun..take care..misterstyx69
#10
Originally Posted by richmondhill
actually it is the second time to my rx-7... my engine was gone once 4 yrs ago, i got it replaced, and the rebuilt lasted for 2 yrs.... a tech looked up for me, fuel injector gone and gas got into the engine..... too bad...
You mean gas didn't get into the engine and it fried? Otherwise if the engine floods all you have to do is replace the injector deflood the engine and start it up.
I'd get a second opinion from someone else. Go to your local partsource store and by a compression guage, $29.99 remove the shrader (sp?) valve and check compression via the leading spark plug. you will have to remove 2 fuses from your fuse block on the driver side shock tower.
This way you will know wether it's infact blown.
Good luck
#12
Retired Moderator, RIP
iTrader: (142)
Joined: Sep 2005
Posts: 25,581
Likes: 133
From: Smiths Falls.(near Ottawa!.Mapquest IT!)
Sorry about that Joe..I used WHITE OUT on that spot on the computer Screen and Put the other Number in ...With Permanent Marker!..now when I come back to the page it "looks" Fixed!!!..J/K..but now that you guys have sort of touched base..No harm ..no foul!..
Thread
Thread Starter
Forum
Replies
Last Post
rx8volks
Canadian Forum
0
08-13-15 05:55 AM
rx8volks
Canadian Forum
0
08-11-15 11:30 PM