I get so jealous when I see people that get to enjoy their RX7's all year! Screw winter!

Good evening out today to get the groceries ..

Attachment 630382
Attachment 630383

Patiently waiting for my Mazdaspeed drysump kit from 1FAASTFD3S to turn up ! Excited !

Picked up this awesome Radium AST.

Thinking about placement .

Attachment 630160
Attachment 630161

I Head out to the Nz Rotary Summer Nationals, a drag racing event for rotaries only held at Framautolite drag way Meremere. This was the first time id taken the car to an event !

Attachment 629902
Attachment 629903

A quick wash before driving out to it to the strip, found a decent park next to a Gunmetal Rx3 with very similar paint job!

Attachment 629904
Attachment 629905
Attachment 629906

Attachment 629907
Attachment 629908
Attachment 629909

Was a good day, watched an Rx3 turbo and Rx2 20b PP do really low 11's all day then finally the both ran identical times 10.90 , crowd was pleased.

Attachment 629910
Attachment 629911

Your car looks good. So does thast ast! Any 1/4mile times?
I'm assuming it's all sorted out now. Did you try another tuner?

Thanks dude ! the car got a lot of attention.

I didn't race unfortunately, the car is still not 100 %. blow off valve doesn't dump and the whistle is still there. Also the clutch master cylinders somewhere have gone & the clutch pedal likes to stick to the firewall.

Been waiting for two weeks for my shop to order a new turbo smart bov, but are always busy. So yeah I just Putt around in it slowly looking good.

Awesome. Have you tried ppre? Have heard thru Haltech there the best rotary tuner in your part of the world.

i'm in for the HKS intercooler! when you get all the other bits sorted its going to be a really nice car

BTW, years and years ago my friend had an RE-Amemyia clutch and it made a whistle too. his car went WOOOO wOOOOOO. i think its because the thing is symmetrically sided.

They built the original car and the 20bpp, I considered it all the way to the point of getting quotes for tow trucks. But its about 7hours from me and I would have liked to visit it to keep an eye on progress so I took it to someone in my city ... I may take it to them for the final tune.

Thanks Dude,

wow the clutch made that sound? that's really good to know because multiple shops are at their wits end trying to find it ! thanks for the heads up. although even if it was .... how could you fix that?

Did a quick google ! And wow these clutches make this noise because of all the holes ?

Attachment 629416


Attachment 629417

Attachment 629418

The videos are identical to my noise , personally I hate the noise ...

https://www.rx7club.com/single-turbo...evving-842017/

https://www.rx7club.com/3rd-generati...estions-24604/

After spending a lot money rebuilding this clutch with carbon Kevlar plates im not sure what I can do now tho haha

I think you should be able to confirm if that's causing the sound by temporarily taping over all the holes.
Personally, I think it has to do with some passage in the irons being blocked off. I know you're using the aftermarket LIM. But there are passages for the egr gas and for the air injection into the exhaust port. I was using a shop air blower to clean my irons 2 weeks ago, and heard the exact type of noise. Changing the angle and air speed made the pitch of the sound change also. I thought of your thread as soon as I heard it but forgot to post here.
That sound would drive me crazy

it definitely isn't a normal noise you'd hear in a car...

Would it be possible to cut off the outside edge with the holes in it and re weld a toothed section without?

Possible for sure. But financially feasible? Probably not. If you tape over the holes and confirm it is causing the sound, then maybe you could find some high temp tape or vinyl that would not melt from the heat. Have it cut to the exact shape by a sign shop and stick it on.

http://m.acehardware.com//product/in...ductId=1273881

Maybe some aluminum tape like this^ ?
And make a jig or die to cut all the circles out the same?

My Project took quite a big hit recently, to the tune of $4300 !

1FAASTFD3S ripped me off a Mazdaspeed dry sump kit.

Read About it here.

https://www.rx7club.com/bad-fugly-me.../#post11882045

Bro that is super stink. I hope you get to bottom of this.was the payment made through PayPal? Or direct into his account from your nz bank?Maybe they can look into it.youd think dealing with another forum member everything would be legit.

Yeah Dude, feeling the burn pretty hard.

It was paid thru bank transfer after he refused to use Paypal. (That is my mistake there, I should of used PayPal)
Calling the Bank customer service desk I was told to go into a branch.
When I went into the branch I was told there was absolutely nothing that could be done as it wasn't a business and the conditions of the bank wire were non refundable.
It also came with a lesson from the Bank teller why I shouldn't do it again lol

New Turbosmart race Bov ,

Looks nice , sounds good too ...

Attachment 628742

Attachment 628743

Replaced some silicone and rubber lines today with some beefy hoses.

Attachment 628496
Attachment 628497

And replaced the plastic T sections with brass pieces, dunno what kind of workshop would install these :scratch:

Attachment 628498

Re-located the Boost solenoid.

Re-located its wiring off the turbo oil feed to down behind the water pump, looks much cleaner.

Attachment 628499

Neatly hidden under the air filter.

Attachment 628500

Cool.always good working through the little things.will get a pic of the air lines I use but I have been moving away from silicone vacuum Lines to nylon tubing and push to lock fittings.not quite as flexible as silicone but do look great and super fast and fuctional for removal.

hows things progressing with getting the money back?we're you going to be building a race engine, for the need of a drysump setup?

Hey man, did you drive down Bucklands Beach road yesterday afternoon at maybe 5pm or something?

Nylon and pushlocks would be nice!

The dry sump situation is progressing, there is no real racing need for the Dry sump haha, ideally this engine would chop and change into my drift car if I ever got around to making the engine bays identical and compatible.

Hi , no this car has never been out east. Did you see something awesome?

Sort of lol. I just heard/saw a dark grey batty, similar colour to yours going past that sounded sweet. Had a really cool sounding BOV.

Sorry man wasn't me ! Maybe see Ya around !