Bubbles Build Thread
04-16-13, 12:28 PM
#1105
haha yupp you got me on that!
r13? insulation from home depot.. 1" metal/flashing tape. make sure u peel off the blue plastic on one side (use as outside) and the foil side on the inside... i used a Spare IR heater i had from screen printing
No FD for DGRR=( way too much to do and it finally kicked in after worknig 2 days straight and feeling helpless hahaha
04-16-13, 01:50 PM
#1106
awesome
^^ Correct, powder coated in chrome or black
haha yupp you got me on that!
absolutely!
r13? insulation from home depot.. 1" metal/flashing tape. make sure u peel off the blue plastic on one side (use as outside) and the foil side on the inside... i used a Spare IR heater i had from screen printing
No FD for DGRR=( way too much to do and it finally kicked in after worknig 2 days straight and feeling helpless hahaha
^^ Correct, powder coated in chrome or black
haha yupp you got me on that!
absolutely!
r13? insulation from home depot.. 1" metal/flashing tape. make sure u peel off the blue plastic on one side (use as outside) and the foil side on the inside... i used a Spare IR heater i had from screen printing
No FD for DGRR=( way too much to do and it finally kicked in after worknig 2 days straight and feeling helpless hahaha
Damn I was hoping to see your car there , but I know how it goes man . Still looking forward to your trophies though! no.. wait , thats a lie LMAO no way i'm getting one .
04-19-13, 03:05 AM
#1109
Will do, I will no longer post here anymore. hense why I stopped along time ago. silly for me to think people can mature.
Maybe they changed their manufacturing over the years. I have a gtc 200 in my hands and it is 100% hollow with no core of rib structure. i can flex it by squeezing it. even it it is a FAKE (which i doubt since it was bought from an authorize dealer) its been on an rx8 for years and it hasnt broke, he has not flipped 6 times and no one that drove behind him is dead.
No, because IT IS A FREAKING PLUG. I HAVE NOT MADE THE PART YET. I will test it, i will throw it, i will drive over it with my freaking truck. jesus. APR is not god. a few months back i was looking at a gtc300 off ebay, seller had it on a track car and it crack in the rear because he was driving faster then the rated MPH it could handle. did cars behind him flip and roll and "apon out" no. it simply cracked. you guys make it seem as if it BREAKS it automatically means its a fly projectile. stop watching so many damn movies. if the deck breaks its breaks, it will only become a projectile if the BRACKET holding the deck fail. which has NEVER been discussed. so how are you already claiming its going to break? unbelievable.
Lmao, that was your whole first post. EVERYTHING you said in your original post are assumptions for something YOU HAVE NEVER SEEN.
Its one thing to ask a question in curiousity, and another thing when you ask questions in the tone of attack, sarcasm, and talking down on someone, which Your original post was fine, and i made it clear i was cool with it. your second post you became a wise ***. Your whole "sakebomb clique" always make comments to me like that, grow up guys, just leave me alone if you dont like what im doing.
Maybe they changed their manufacturing over the years. I have a gtc 200 in my hands and it is 100% hollow with no core of rib structure. i can flex it by squeezing it. even it it is a FAKE (which i doubt since it was bought from an authorize dealer) its been on an rx8 for years and it hasnt broke, he has not flipped 6 times and no one that drove behind him is dead.
No, because IT IS A FREAKING PLUG. I HAVE NOT MADE THE PART YET. I will test it, i will throw it, i will drive over it with my freaking truck. jesus. APR is not god. a few months back i was looking at a gtc300 off ebay, seller had it on a track car and it crack in the rear because he was driving faster then the rated MPH it could handle. did cars behind him flip and roll and "apon out" no. it simply cracked. you guys make it seem as if it BREAKS it automatically means its a fly projectile. stop watching so many damn movies. if the deck breaks its breaks, it will only become a projectile if the BRACKET holding the deck fail. which has NEVER been discussed. so how are you already claiming its going to break? unbelievable.
Lmao, that was your whole first post. EVERYTHING you said in your original post are assumptions for something YOU HAVE NEVER SEEN.
Its one thing to ask a question in curiousity, and another thing when you ask questions in the tone of attack, sarcasm, and talking down on someone, which Your original post was fine, and i made it clear i was cool with it. your second post you became a wise ***. Your whole "sakebomb clique" always make comments to me like that, grow up guys, just leave me alone if you dont like what im doing.
I done my own and im not a tec guru I been using drifting and time attacks my makes good laptimes and never broke off...so keep doing what u know best
04-30-13, 10:51 PM
#1110
Thanks guys, i appreciate the encouragement! some more front yard driveway engineering to come in a few!
sooo an update. new deadline... May 10. yup, im fucked again. Springfest in VA if anyone wants to come! ill be vendoringgg hopefully have a few more t-shirt designs out......
SO. i bought another 7... friend of a friends house caught on fire, something fell on to the 7, caught fire. Fire was luckily put out once it reached the dash. aka engine bay is SAFE. its my parts car. well i really bought it for the spare motor (my 2nd back up engine) some pics
sooo an update. new deadline... May 10. yup, im fucked again. Springfest in VA if anyone wants to come! ill be vendoringgg hopefully have a few more t-shirt designs out......
SO. i bought another 7... friend of a friends house caught on fire, something fell on to the 7, caught fire. Fire was luckily put out once it reached the dash. aka engine bay is SAFE. its my parts car. well i really bought it for the spare motor (my 2nd back up engine) some pics
04-30-13, 11:09 PM
#1111
Oh and to add to the list of things that need to be done, i lost my power fc. dont ask how, i dont know. after 2 days and 8hours searching my house high and low, i;ve given up. what a PITa.
This car is never running nor will there ever be a big "unveil" so now im just whoring pics.
dont mind the rear fenders. they dont match. i know. im redoing them tomorrow...
this fender shape is all kinds of wrong. idk what happened
THIS is what it should look like.
weird. didnt know i was running camber.....
still need a bigger spacer............
EXACTLY. soooo off. fml.
YESSSSSSSSSSS
99 spec bumper is going to look like *** with my kit... havent had time to make the front bumper.....
I *think* this is at its proper height...
This car is never running nor will there ever be a big "unveil" so now im just whoring pics.
dont mind the rear fenders. they dont match. i know. im redoing them tomorrow...
this fender shape is all kinds of wrong. idk what happened
THIS is what it should look like.
weird. didnt know i was running camber.....
still need a bigger spacer............
EXACTLY. soooo off. fml.
YESSSSSSSSSSS
99 spec bumper is going to look like *** with my kit... havent had time to make the front bumper.....
I *think* this is at its proper height...
04-30-13, 11:46 PM
#1113
Yup. about the right height. will sit between 13"-14" high
roof line to leading edge of spoiler. my crooked eyes tell me thats pretty damn close to the height of the roof line. (begins to worry if cargo box will interfere/hit spoiler)
MY WING IS BIGGER THAN YOURS
NOTE, there are NO load bearing test done on these WOOD wing stays. they are for MOCK UP PURPOSES only. However, the gorilla tape is a final product and has been wind tested at 13mph winds.
roof line to leading edge of spoiler. my crooked eyes tell me thats pretty damn close to the height of the roof line. (begins to worry if cargo box will interfere/hit spoiler)
MY WING IS BIGGER THAN YOURS
NOTE, there are NO load bearing test done on these WOOD wing stays. they are for MOCK UP PURPOSES only. However, the gorilla tape is a final product and has been wind tested at 13mph winds.
05-13-13, 04:34 PM
#1120
Got it, hopefully the car will be done, but its no longer priority. I need to get Bubble Tech stuff going..
Gracias
hahaha dang. Thanks, glad to help fuel some ideas!
Sooo i failed to have the 7 ready for another meet (springfest in VA) and between trying to get the car running and "starting up" Bubble tech, it really isnt working well. So The 7 is going to take the back burner, its been draining me of money (like all the damn money pits) that i should be investing in the company.. so with that said, the progress on the 7 will slow down, but hopefully ill have some new parts whipped up for it
sooo to try catching up to date... this is somewhat in order....
New Headlightsssss
I redid the VMIC but i dont think i ever posted pics... Radiator now sits like the HKS style VMIC, reason i did this was to add clearance. now if i bottom out my fans hit rather then the radiator piping. not great, but better. Its probably really hard to see the brackets i made since i powder coated them gloss black....
Gutted the HVAC ducts/plastics....... i already had the heater core in, and i didnt want to disconnect the coolant lines and redo them so i just hacked up all the plastic....Note- i will be making my own "heater" plumbing/unit since im getting rid of the stock dash, with this junk gone i can push the dash up more giving my passenger more leg room, plus i want to relocated my electronics behind/under the dash
This damn spoiler has been a BITCH to sand.. so much sanding to get its shape
Side skirt mock up, Side skirts are currently at the painters, just got cleared, need to pick em up!
Driver side rear fender redone. original one was SOOOOOO off. NOTE:if you attempt your own body kit, do not do it in the winter, on a slanted driveway, and with a car thats slanted (dr side had flat tires) butttt it was a fun learning experience.. next one will be spot on.
Gracias
Sooo i failed to have the 7 ready for another meet (springfest in VA) and between trying to get the car running and "starting up" Bubble tech, it really isnt working well. So The 7 is going to take the back burner, its been draining me of money (like all the damn money pits) that i should be investing in the company.. so with that said, the progress on the 7 will slow down, but hopefully ill have some new parts whipped up for it
sooo to try catching up to date... this is somewhat in order....
New Headlightsssss
I redid the VMIC but i dont think i ever posted pics... Radiator now sits like the HKS style VMIC, reason i did this was to add clearance. now if i bottom out my fans hit rather then the radiator piping. not great, but better. Its probably really hard to see the brackets i made since i powder coated them gloss black....
Gutted the HVAC ducts/plastics....... i already had the heater core in, and i didnt want to disconnect the coolant lines and redo them so i just hacked up all the plastic....Note- i will be making my own "heater" plumbing/unit since im getting rid of the stock dash, with this junk gone i can push the dash up more giving my passenger more leg room, plus i want to relocated my electronics behind/under the dash
This damn spoiler has been a BITCH to sand.. so much sanding to get its shape
Side skirt mock up, Side skirts are currently at the painters, just got cleared, need to pick em up!
Driver side rear fender redone. original one was SOOOOOO off. NOTE:if you attempt your own body kit, do not do it in the winter, on a slanted driveway, and with a car thats slanted (dr side had flat tires) butttt it was a fun learning experience.. next one will be spot on.
05-13-13, 04:35 PM
#1121
rebuilt, and upgraded alternator
not relevant but i dropped my dslr. bye bye sigma lens =(
wing primered... gonna sand, primer again, then wet sand... maybe some body work if i find more flaws =(
Chillin on the brackets i made... even though you cant see them.... nor are they bolted on yet aka held by c-clamps
For those who follow bubble tech apparel, 2 new designs should be released tonight!
Another tip, do not apply decals in the wind. freaking wind blew the decal onto the glass before i could align it. bummer. ill have to recut another one... and probably a bit smaller....
MMMMMMMMMMM and prototype floor pansssssssss
not relevant but i dropped my dslr. bye bye sigma lens =(
wing primered... gonna sand, primer again, then wet sand... maybe some body work if i find more flaws =(
Chillin on the brackets i made... even though you cant see them.... nor are they bolted on yet aka held by c-clamps
For those who follow bubble tech apparel, 2 new designs should be released tonight!
Another tip, do not apply decals in the wind. freaking wind blew the decal onto the glass before i could align it. bummer. ill have to recut another one... and probably a bit smaller....
MMMMMMMMMMM and prototype floor pansssssssss
