Bubbles Build Thread
#929
then i got really bored with the 99 spec bumper.. trying to make some canards to make it a little more aggressive. didnt come out how i planned... well i actually didnt plan it. i was winging it as i went. I dont think the 99 spec lip will go with they style canard. i might just make a completely new lip that will attach to a "cut" 99 spec bumper -- expanding the stock openings
#935
Blah.
Thank you mother nature. Hurricane then storm back to back. you blow.
![Bubbles Build Thread-di9hd.jpg](https://www.rx7club.com/attachments/build-threads-292/757603d1683137412t-bubbles-build-thread-di9hd.jpg)
finally got around to adding a flange to the opening side. this gives it more dimension and adds rigidity. also used a round over bit to give it a nice radius. no harsh 90* angles here!
<a href="http://imgur.com/ufYdY"><img src="https://i.imgur.com/ufYdY.jpg" title="Hosted by imgur.com" alt="" /></a>
Sand, fill, repeat........ x3?
![Bubbles Build Thread-dnao1.jpg](https://www.rx7club.com/attachments/build-threads-292/757604d1683137412t-bubbles-build-thread-dnao1.jpg)
alllll most donee. hopefully this will be the last body filler layer and i can just get away with primer for the rest *fingers crossed*
hand milled a transmission spacer.. this is 3/4" thick and allows me to add more tranny fluid. approx. 0.6QT or 19oz. I'm gonna attempt to make a 1" version. Now to source some hardware!
![Bubbles Build Thread-zh6ls.jpg](https://www.rx7club.com/attachments/build-threads-292/757605d1683137412t-bubbles-build-thread-zh6ls.jpg)
Andddd Mocking up some flat door cards. final version will be carbon fiber![Smilie](https://www.rx7club.com/images/smilies/smile.gif)
Thank you mother nature. Hurricane then storm back to back. you blow.
![Bubbles Build Thread-di9hd.jpg](https://www.rx7club.com/attachments/build-threads-292/757603d1683137412t-bubbles-build-thread-di9hd.jpg)
finally got around to adding a flange to the opening side. this gives it more dimension and adds rigidity. also used a round over bit to give it a nice radius. no harsh 90* angles here!
<a href="http://imgur.com/ufYdY"><img src="https://i.imgur.com/ufYdY.jpg" title="Hosted by imgur.com" alt="" /></a>
Sand, fill, repeat........ x3?
![Bubbles Build Thread-dnao1.jpg](https://www.rx7club.com/attachments/build-threads-292/757604d1683137412t-bubbles-build-thread-dnao1.jpg)
alllll most donee. hopefully this will be the last body filler layer and i can just get away with primer for the rest *fingers crossed*
hand milled a transmission spacer.. this is 3/4" thick and allows me to add more tranny fluid. approx. 0.6QT or 19oz. I'm gonna attempt to make a 1" version. Now to source some hardware!
![Bubbles Build Thread-zh6ls.jpg](https://www.rx7club.com/attachments/build-threads-292/757605d1683137412t-bubbles-build-thread-zh6ls.jpg)
Andddd Mocking up some flat door cards. final version will be carbon fiber
![Smilie](https://www.rx7club.com/images/smilies/smile.gif)
![Bubbles Build Thread-kkywl.jpg](https://www.rx7club.com/attachments/build-threads-292/757606d1683137412t-bubbles-build-thread-kkywl.jpg)
#945
hahah thanks. get your *** back in the garage and finish!! I hope were posting from your phone while you were taking a "quick breather"!
Not much update today.. I spent most my day picking up this puppy =) a Nice old Cincinnati Vertical Mill =)
![Name: CNkn9.jpg
Views: 24
Size: 94.4 KB](https://www.rx7club.com/attachments/build-threads-292/757542d1683137398-bubbles-build-thread-cnkn9.jpg)
So with that taking up majority of my day, I started late and only worked an hour or so... so by the time finished the second prototype of the door panel it was too dark to take a picture...
more updates tomorrow!
well maybe.
tomorrows football =)
Not much update today.. I spent most my day picking up this puppy =) a Nice old Cincinnati Vertical Mill =)
![Name: CNkn9.jpg
Views: 24
Size: 94.4 KB](https://www.rx7club.com/attachments/build-threads-292/757542d1683137398-bubbles-build-thread-cnkn9.jpg)
So with that taking up majority of my day, I started late and only worked an hour or so... so by the time finished the second prototype of the door panel it was too dark to take a picture...
more updates tomorrow!
well maybe.
tomorrows football =)
#949
Weeeeeeeeeeeeeeeeeeeeeeeeeeeee
![Name: IMG_20121125_134123.jpg
Views: 119
Size: 117.0 KB](https://www.rx7club.com/attachments/build-threads-292/690539d1501528213-bubbles-build-thread-img_20121125_134123.jpg)
PS I admit, at first when i saw door panels like these I was like how hard could it be, its a flat panel........... hahah I'm learning what a PITA it actually is.. so many minor tweaks to get it exactly how I want it.... but im almost there! =)
![Name: IMG_20121125_134123.jpg
Views: 119
Size: 117.0 KB](https://www.rx7club.com/attachments/build-threads-292/690539d1501528213-bubbles-build-thread-img_20121125_134123.jpg)
PS I admit, at first when i saw door panels like these I was like how hard could it be, its a flat panel........... hahah I'm learning what a PITA it actually is.. so many minor tweaks to get it exactly how I want it.... but im almost there! =)