Bubbles Build Thread
#26
exhaust had a melted bag on it so i sanded it off and sprayed the tip a low gloss black.. idk how i feel about it.. gotta look at it on the car... was inspired by the apexi noir
#29
do they really? i used por15 as my basecoat for the engine bay and was tempted to paint other things with it but i didnt think it would withstand the heat... good to know they have exhaust paint
#33
Nice to meet you today benny,
It's Jack
I have the Apexi Noir Exhaust on my car.. you should have looked at it.
I have to say the car is coming together nicely. It's definitely getting there.
I definitely can't wait till it fires up! you should just get a nice SMIC to finish the touch for staying Modified factory
It's Jack
I have the Apexi Noir Exhaust on my car.. you should have looked at it.
I have to say the car is coming together nicely. It's definitely getting there.
I definitely can't wait till it fires up! you should just get a nice SMIC to finish the touch for staying Modified factory
#35
Nice to meet you today benny,
It's Jack
I have the Apexi Noir Exhaust on my car.. you should have looked at it.
I have to say the car is coming together nicely. It's definitely getting there.
I definitely can't wait till it fires up! you should just get a nice SMIC to finish the touch for staying Modified factory
It's Jack
I have the Apexi Noir Exhaust on my car.. you should have looked at it.
I have to say the car is coming together nicely. It's definitely getting there.
I definitely can't wait till it fires up! you should just get a nice SMIC to finish the touch for staying Modified factory
damn wish i knew i would checked it out...
i have the M2 ic
boo yeahh will upload more later
not sure what rhino lining is... is that like truck bed lining?
#37
MMM round two... Crunch time for Deals gap... lets see if i can get my **** together by then..............
I guess ill Recap..
Current set up before i stripped it down...
Engine
Ported (HPB) and built By My man Dave @ KDR Rotary
RA 2mm super seals
Rx8 E-shaft
99 Spec twin turbos
greddy compression elbow
Homebrewed Intakes w greddy filters
Greddy FMIC
Koyo Radiator
Greddy? pulley kit
DP/Resonated MP/ Apexi exhaust?
Apexi PFC & commander
Fuel
550/1680 (kg parts)
Aeromotive FPR
Denso FP
-removed resistor pack
-added FP relay
Suspension/wheels
stock struts (blown) > tokicos (blown) > back to stock
Eibach springs
All super bro bushings
greddy/knock off? front strut bar
Racing hart c4 18x7.5 (Yeah i know.. temp rims)
hawk pads
drilled/ slotted rotors
SS clutch and brake lines
Interior
Innovate Digital WB gauge
Stri fp
Stri boost
personal neo ginta steering wheel
NRG quick realease hub
voodoo shift ****
Exterior
Scoote replica hood
r1 lip?
Goodies
AEM water meth
'10 plans!
Engine
Custom T4 divided Manifold from JIM @ JPR Imports
Custom DP from JPR Imports
Borg Warner s366 Turbo
Tial 44mm WG
HKS SSQV BOV (not sure what version yet)
Fuel
Maybe 850 primaries?
Suspension/wheels
Stance Coilovers
Enkei RPF1 rims 17x9 all around or 17x10 in the back
toyo r888
Interior
New Stri FP gauge (got the wrong color)
+1 Stri gauge to fill pod
Exterior
99 spec front lip
panspeed front flares
convereted 99 spec tails
Stuff to do
re spray the engine bay
remove ABS
powdercoat... everythign!
I guess ill Recap..
Current set up before i stripped it down...
Engine
Ported (HPB) and built By My man Dave @ KDR Rotary
RA 2mm super seals
Rx8 E-shaft
99 Spec twin turbos
greddy compression elbow
Homebrewed Intakes w greddy filters
Greddy FMIC
Koyo Radiator
Greddy? pulley kit
DP/Resonated MP/ Apexi exhaust?
Apexi PFC & commander
Fuel
550/1680 (kg parts)
Aeromotive FPR
Denso FP
-removed resistor pack
-added FP relay
Suspension/wheels
stock struts (blown) > tokicos (blown) > back to stock
Eibach springs
All super bro bushings
greddy/knock off? front strut bar
Racing hart c4 18x7.5 (Yeah i know.. temp rims)
hawk pads
drilled/ slotted rotors
SS clutch and brake lines
Interior
Innovate Digital WB gauge
Stri fp
Stri boost
personal neo ginta steering wheel
NRG quick realease hub
voodoo shift ****
Exterior
Scoote replica hood
r1 lip?
Goodies
AEM water meth
'10 plans!
Engine
Custom T4 divided Manifold from JIM @ JPR Imports
Custom DP from JPR Imports
Borg Warner s366 Turbo
Tial 44mm WG
HKS SSQV BOV (not sure what version yet)
Fuel
Maybe 850 primaries?
Suspension/wheels
Stance Coilovers
Enkei RPF1 rims 17x9 all around or 17x10 in the back
toyo r888
Interior
New Stri FP gauge (got the wrong color)
+1 Stri gauge to fill pod
Exterior
99 spec front lip
panspeed front flares
convereted 99 spec tails
Stuff to do
re spray the engine bay
remove ABS
powdercoat... everythign!
#39
oh my goodies, my goodies, oh no not my goodies!
lol nothing much tho... some stuff to delet abs, oil filters idmitsu 99 spec lip, some chassis paint and vinyl paint
does any one know what this is? looks like some adhesive rubber along the edge of the lip to protect it? but its falling off... does anyone use this???
lol nothing much tho... some stuff to delet abs, oil filters idmitsu 99 spec lip, some chassis paint and vinyl paint
does any one know what this is? looks like some adhesive rubber along the edge of the lip to protect it? but its falling off... does anyone use this???
#44
Thanks, i like the gold but i might be going a different route so that may changed in the future...
hhahha nope, moms house.. but she owns 3 real estates and rents one out... i mostly am the only one living at that house, but shes cool with it
hhahha nope, moms house.. but she owns 3 real estates and rents one out... i mostly am the only one living at that house, but shes cool with it
#46
moreeeeee gooodies
ACT 6puck sprung
birthday present that i got from the girl friend that is yettttt to be installed...
finally got to use my vibrating tumbler!!! this thing is wickedddddd- for those who dont know you toss your bolts into it and add some abrasive (im using cork) and leave it for 24+ hours and it will clean all your bolts! only a few hours in and those bolts are looking better!!
getting the hang of the 2 stage candy color powder coating... not the BEST quality but hey, for my first time and attempting 2 coats, hell it will suffice until next year when i strip it and redo everything again lol.. the color is pretty dope, looks similar to the hks purple
ACT 6puck sprung
birthday present that i got from the girl friend that is yettttt to be installed...
finally got to use my vibrating tumbler!!! this thing is wickedddddd- for those who dont know you toss your bolts into it and add some abrasive (im using cork) and leave it for 24+ hours and it will clean all your bolts! only a few hours in and those bolts are looking better!!
getting the hang of the 2 stage candy color powder coating... not the BEST quality but hey, for my first time and attempting 2 coats, hell it will suffice until next year when i strip it and redo everything again lol.. the color is pretty dope, looks similar to the hks purple
#47
and for the grand finaleeeeeeeeeeeeee!!!!!! my sexyyyyyyyyyyyyyy *** manifold. PROPS TO JIM @ JPR IMPORTS in South Jersey! welds on this thing is SEX. T4 divided, med runners, vband for tial 44mm wg..
:
:
#48
Teaserrrrrrrr =)
Borg Warner S366 .91 divided
Flywheel and fenders are in the MPV (aka parts wagon), vband clamps should be coming today for the 4" exhaust im getting made also picking up one of the mufflers today andddd tial 44 is on order!
Borg Warner S366 .91 divided
Flywheel and fenders are in the MPV (aka parts wagon), vband clamps should be coming today for the 4" exhaust im getting made also picking up one of the mufflers today andddd tial 44 is on order!
#49
Joined: Mar 2001
Posts: 30,575
Likes: 563
From: FL-->NJ/NYC again!
Your build is coming along, will be interested in seeing the car at DGRR
A few random things:
The rubber strip on the 99 lip can be taken off, it's just there to save you from the first few scrapes.
You're going to like those Hella horns, they are LOUD
Did you get used R888s? I'd be very careful with those suckers on the street in anything that's not warm dry weather.
A few random things:
The rubber strip on the 99 lip can be taken off, it's just there to save you from the first few scrapes.
You're going to like those Hella horns, they are LOUD
Did you get used R888s? I'd be very careful with those suckers on the street in anything that's not warm dry weather.