Got better pictures of the rims?
|
Originally Posted by 7_rocket
(Post 12071621)
Got better pictures of the rims?
|
That damn rear wiper man...... :rofl:
|
That picture rich was from back in 2007-8.... it was later removed..
|
Originally Posted by GoodfellaFD3S
That damn rear wiper man...... :rofl:
|
Originally Posted by R-R-Rx7
(Post 12071843)
That picture rich was from back in 2007-8.... it was later removed..
|
few months back i saw this online in japan.
A mazdaspeed 3 gauge pod for the fd .. while i felt that the whole piece was chunky i was like, im getting this.. I couldnt be any more wrong LOL This lil thing sold for a little over 3k usd and that didnt even include commission shipping within japan, and then international shipping https://cimg2.ibsrv.net/gimg/www.rx7...a3336b5505.jpg https://cimg3.ibsrv.net/gimg/www.rx7...a27edb415a.jpg https://cimg4.ibsrv.net/gimg/www.rx7...77a30d3fde.jpg I have my pre turbo dual EGT on the passenger airbag cover (no airbag obviously :lol:) currently with the KOSO dual Egt monitor. Switched to a 52mm gauge (digital dual egt) My AFR is in the din pocket (NGK AFX) that comes as a square box ... Hard to mount needless to say. found a 52mm gauge that hooks up to the 0-5v output of the NGK And i switched my boost control for a turbosmart eboost boost controller that comes as a gauge So long story short, i needed a 3 gauge pod ... After looking for one that looked half nice, :lol: i decided i had to make one ! Thanks to my buddy Jim Thompson, He hooked me up with a super clean 99-2002 dashboard. While i have no intention to use it as a dashboard, but rather as a test dummy for products as such (since my friggin car is half way across the globe) I figured this is a rare opportunity to get the dash; and If i Ever need a Dash, oh well i have one :) So since i can more or less fabricate fiberglass stuff, i figured let me find something that looks half decent and make it work... pretty much like what i did with the defi ZD "dash" monitor I opted for a GC8 Pod fiberglass. initially fitting as such : https://cimg3.ibsrv.net/gimg/www.rx7...db9b270470.jpg https://cimg7.ibsrv.net/gimg/www.rx7...229887a519.jpg https://cimg9.ibsrv.net/gimg/www.rx7...8af1c10f4c.jpg https://cimg0.ibsrv.net/gimg/www.rx7...8f560338ae.jpg Then some chopped up version :) https://cimg6.ibsrv.net/gimg/www.rx7...e9e0d94818.jpg |
getting for some fiberglass makin! Since the location was finally found :)
https://cimg6.ibsrv.net/gimg/www.rx7...74824a0c46.jpg https://cimg7.ibsrv.net/gimg/www.rx7...1090440727.jpg https://cimg8.ibsrv.net/gimg/www.rx7...23450d642f.jpg https://cimg9.ibsrv.net/gimg/www.rx7...21aadabb3b.jpg as of right now i have no intention to use the Border racing mickey mouse pod but its the closest thing i had to a cluster hood to see how it looks from the driver's standpoint I will make a bracket that it will be screwed on together at the speaker mount much like the mazdaspeed.. just so much better :) :) :) |
3k? OMG :)
Nice piece of work man. I so much like the ZD pod, I think this is going to come out even better! Keep us posted. |
pod is near completion. maybe another week until im done with the brackets welding iriditing etc
https://cimg8.ibsrv.net/gimg/www.rx7...8969724629.jpg https://cimg9.ibsrv.net/gimg/www.rx7...bec36810d4.jpg https://cimg0.ibsrv.net/gimg/www.rx7...f7e21e203b.jpg car just made it to the paint booth ;) https://cimg1.ibsrv.net/gimg/www.rx7...e34f87d8eb.jpg and finally back to a cleaner look ;) |
Beautiful !! White FD's are just deadly !!
One quick question , did you simply go back to OEM hood , because of look or is there anything wrong with that orgasmic AD-9 hood. (I would of painted it white) |
Originally Posted by 7krayziboi
(Post 12081134)
Beautiful !! White FD's are just deadly !!
One quick question , did you simply go back to OEM hood , because of look or is there anything wrong with that orgasmic AD-9 hood. (I would of painted it white) https://cimg5.ibsrv.net/gimg/www.rx7...6246436692.jpg :) I know this is an added trim.. dont like how it sticks out more than the already sticking out hood vent,.. so i figured to give the same effect (or similar masked part) during paint second person asking me the same question.. sorry i guess i wasnt clear |
That hood is terrible. Sell it to me :egrin:
|
Originally Posted by 7_rocket
(Post 12081137)
That hood is terrible. Sell it to me :egrin:
how much do you need on top ?:) :lol: |
Slowly coming together :)
https://cimg5.ibsrv.net/gimg/www.rx7...17bacf2542.jpg https://cimg7.ibsrv.net/gimg/www.rx7...2cea6c9b6.jpeg https://cimg2.ibsrv.net/gimg/www.rx7...cc1558a7e.jpeg https://cimg6.ibsrv.net/gimg/www.rx7...17ee0ef56.jpeg https://cimg4.ibsrv.net/gimg/www.rx7...ffd4fcbf3.jpeg https://cimg9.ibsrv.net/gimg/www.rx7...44977339d.jpeg https://cimg3.ibsrv.net/gimg/www.rx7...351e779b2.jpeg https://cimg1.ibsrv.net/gimg/www.rx7...25cc3ed2e.jpeg https://cimg5.ibsrv.net/gimg/www.rx7...a345b6591.jpeg https://cimg0.ibsrv.net/gimg/www.rx7...279539f86.jpeg https://cimg2.ibsrv.net/gimg/www.rx7...181e9d4a6.jpeg |
|
Love the fabrication skills.
|
The car looks great dude. I like how you can see the blue tint on Carol's old wheels in that pic :nod:
|
New exterior updates look great! Thanks for sharing.
|
Your car is beautiful, just I read the whole thread , very interesting.
I hope to continue to update A greeting |
Originally Posted by 7krayziboi
(Post 12088410)
Love the fabrication skills.
Originally Posted by GoodfellaFD3S
(Post 12088438)
The car looks great dude. I like how you can see the blue tint on Carol's old wheels in that pic :nod:
Originally Posted by thatdon
(Post 12088872)
New exterior updates look great! Thanks for sharing.
Originally Posted by lomismrx
(Post 12088874)
Your car is beautiful, just I read the whole thread , very interesting.
I hope to continue to update A greeting |
a few updates.
didnt get to do much due to some personal issues but here's how the car came out I replaced the front canards with the genuine FEED 3 piece ones.. Replaced the rear wing . apparently this is a new(er?) odula version. looks much better than the previous version painted the hood to match the car.. needs hood pins for a better fitment New transmission (better for the street) My clutch lasted maybe 3 months of continuous use. slips like a mofo LOL. lasted more or less what i was expecting out of it. Time for a serious upgrade, Been debating between R3C or R2C from os giken. I know the R3C will be an overkill but oh well, dont do we all do that anyway LOL https://cimg5.ibsrv.net/gimg/www.rx7...a593144188.jpg https://cimg8.ibsrv.net/gimg/www.rx7...f44553f819.jpg https://cimg7.ibsrv.net/gimg/www.rx7...a8d5164ddf.jpg https://cimg6.ibsrv.net/gimg/www.rx7...b756a9d9c1.jpg https://cimg3.ibsrv.net/gimg/www.rx7...ac5e99a463.jpg https://cimg0.ibsrv.net/gimg/www.rx7...ca931d8582.jpg |
|
It's crazy how much more 'sportscar-like' your FD looks than those Nissans......
Lovin the exterior changes :nod: |
Thanks man
we definitely had loads of fun that day .. only if my clutch wasnt slipping. |
Had the chance to be a passenger in the car. At 1.7bar(!) the car goes like a rocket. Amazing torque. This car misses nothing, from look to power it is great in every aspect!
|
What mirrors?
|
Originally Posted by Carpe_Diem_7
(Post 12097713)
Had the chance to be a passenger in the car. At 1.7bar(!) the car goes like a rocket. Amazing torque. This car misses nothing, from look to power it is great in every aspect!
|
Originally Posted by 7_rocket
(Post 12097732)
What mirrors?
craftsquare mounted to the triangle |
Wow mate looks quality!
Did you buy the feed canards new or off the yahoo auctions dude? |
Originally Posted by tomCTR
(Post 12098140)
Wow mate looks quality!
Did you buy the feed canards new or off the yahoo auctions dude? Thanks |
Pics of the engine bay please
|
THis is an old picture, havent taken one lately , hasnt changed much (except the blow off that its visible) minor changes overall
https://cimg8.ibsrv.net/gimg/www.rx7...28b89a5be4.jpg thats from the post above.. https://cimg0.ibsrv.net/gimg/www.rx7...d0a77cf5f3.png
Originally Posted by 7_rocket
(Post 12102489)
Pics of the engine bay please
|
What street tires are you using?
|
Tires are nt 05 245 fronts 285 rears
|
Literally, nothing on this car I don't like. It Looks amazing!
|
Originally Posted by Barry_Beef
(Post 12118676)
Literally, nothing on this car I don't like. It Looks amazing!
|
Feed wing would really make this pop..:suspect::suspect::suspect::suspect::suspect: :suspect::suspect::suspect:
|
Loving the wing on her now actually.nice build!
|
Originally Posted by Hayes204
(Post 12274617)
Loving the wing on her now actually.nice build!
|
Such a beautiful build! Love it. You given me a lot of ideas and inspiration Costa!
Greetings from Greece! |
Originally Posted by R-R-Rx7
(Post 12276442)
thanks!! I have been doing some work on the car so i guess i ll be posting updates soon
|
Originally Posted by brad89au
(Post 12287532)
"Soon" huh? :)
soon! :) |
Originally Posted by Yannis
(Post 12287186)
Such a beautiful build! Love it. You given me a lot of ideas and inspiration Costa!
Greetings from Greece! |
Originally Posted by R-R-Rx7
(Post 12287947)
:fingersx:
soon! :) |
Originally Posted by 7_rocket
(Post 12288001)
What a shitty update.. Get on it
|
I did replace the turbo last year with one of the EFR EWG series and oh boy i love the new setup at 30psi... made a new 3.5" downpipe but not much else really in there..
BUT! There are some interior updates. I will be Installing the Bathurst R carbon look Mazdaspeed interior pieces . fresh carpet, Get rid of the roll cage and for now go back to the OEM seats. I have been wanting to simplify my interior without losing the function of my current setup https://cimg7.ibsrv.net/gimg/www.rx7...e3c03865d0.jpg The Setup above consists of : @speaker location gauge pod (Genuine , but slightly modded Mazdaspeed 3 gauge pod) : 60mm turbosmart boost control dual EGT gauge NGK AFX wideband gauge (hooked up to the NGK AFX itself) @steering column defi ZD displaying : OIL/WATER TEMP OIL press fuel Press EGT (yes 3rd EGT) boost @ the gauge shiftlight and warning light TIME (:suitdance) and whatever the commander shows . Its Nice, Its functional but I feel i am getting too old for this. So i decided to simplify this setup and actually run a boost by gear setup properly because i cant use 30psi everywhere at the track. I came across this boost control https://cimg7.ibsrv.net/gimg/www.rx7...7b9b7c1d85.png which will display everything i need to see (2 egts , wideband fuel press and many others) Run boost by gear, boost by speed etc and the best part of all, since a few of my friends have been warning me about the safety features that the power fc is lacking, and i am not willing to change to a different ECU again, it comes with all the safety features. Great Success (Borat voice) cleaning the interior is as i said before one of my main objectives so i got creative and designed something that should be useful Rmagic style Commander holder that bolts on to the Din pocket https://cimg1.ibsrv.net/gimg/www.rx7...39da328de7.jpg https://cimg2.ibsrv.net/gimg/www.rx7...0b351825ab.jpg So this is a Din pocket that clips in. At somehow early stages of the design . Din pocket includes Plex Tuning flush mount commander holder Serial connector integrated for the datalogic. Usb flange mount for phone charging https://cimg7.ibsrv.net/gimg/www.rx7...ca22df46b.jpeg https://cimg8.ibsrv.net/gimg/www.rx7...475dda7af.jpeg https://cimg0.ibsrv.net/gimg/www.rx7...6e2cdc16e.jpeg https://cimg1.ibsrv.net/gimg/www.rx7...a31d21628.jpeg https://cimg9.ibsrv.net/gimg/www.rx7...a915e080c.jpeg Prototype fits well. needs some minor adjustments but i should be able to finish everything in the next few days. I will be going back to Cyprus soon to wire this beauty and try it out |
About time sir. Well done
|
Very cool.. but looks like the Plex gets a lot of it's function from OBD II interface. How are you getting it to work with the PFC?
P |
All times are GMT -5. The time now is 06:59 PM. |
© 2024 MH Sub I, LLC dba Internet Brands