planning on doing the infinity 8, so curious to see this thread progress.
also, cost on these things has come way down. |
Originally Posted by wutangben
(Post 11875802)
planning on doing the infinity 8, so curious to see this thread progress.
also, cost on these things has come way down. EB Turbo |
probably the 8h
|
Originally Posted by wutangben
(Post 11879816)
probably the 8h
EB Turbo |
Originally Posted by EB Turbo
(Post 11880196)
Unless you are running a 4 Rotor you will want the Infinity 6. If you use the 8h you will loose 2 low side drivers and 2 digital inputs. For 2 and 3 rotor engines those functions are worth more than the 2 injector/coil outputs of the 8h.
EB Turbo thanks |
Originally Posted by wutangben
(Post 11880206)
running a 2 rotor with sequential twins, so the 6 is what I want?
thanks EB Turbo |
I should clarify, going to run simplified sequential
|
Originally Posted by EB Turbo
(Post 11835693)
I am giving my honest opinion because i dont want to hide shortcomings. There is a short and a long answer. Short answer, yes. Long answer, no. They do run rotaries 13b and 20b, omp does work, afm is supported, multiple trigger patterns for fc cas, fd 12-1, 36-1, fd wasted spark and direct fire, trailing ignition does work, 2nd stage and a 3rd staged injection work.
EB Turbo Idel |
Originally Posted by MSTHTD1
(Post 11909351)
EB Turbo has the Long answer changed? I am looking for an ECU to run my 20B (Single turbo, no OMP, street with occasional track duty FD on E85.) I'm replacing a PS2000 to upgrade to either an Infinity or Haltech Elite, but as I understand it both ECU's are still in there infancy stages... Please advise regarding your Long answer quote above.
Idel I think that quote was taken a little out of context. The Infinity will run and has been running 2 and 3 rotor engines for a while now. The area that was lacking was the FD PnP and Sequential turbo support. I do offer a PnP kit for the FD now. Having the I/O available to run the sequential turbos has not been sorted out yet. The kits I have completed have been single turbo. In your case it isn't an issue. EB Turbo |
Anyone run one of these on an N/A fc? Guessing no...
I emailed AEM back in April and they said my CAS wasn't supported. Any advice on what would work? |
Originally Posted by parid
(Post 11926703)
Anyone run one of these on an N/A fc? Guessing no...
I emailed AEM back in April and they said my CAS wasn't supported. Any advice on what would work? EB Turbo |
All times are GMT -5. The time now is 06:31 PM. |
© 2024 MH Sub I, LLC dba Internet Brands