help:not getting any TPS voltage
#1
covered in dust
Thread Starter
iTrader: (1)
Join Date: Apr 2005
Location: new mexico
Posts: 451
Likes: 0
Received 0 Likes
on
0 Posts
help:not getting any TPS voltage
as the title says I'm not getting any votage from my tps on my pfc commander. the 2 tps voltages are highlighted and at 0. My idle is perfect though and when i adjust the tps (even with out seeing the voltage difference) the idle DOES infact react to being adjusted. what could be the problem? And what if I were to drive with no tps voltage?
#3
covered in dust
Thread Starter
iTrader: (1)
Join Date: Apr 2005
Location: new mexico
Posts: 451
Likes: 0
Received 0 Likes
on
0 Posts
well I was having an idle problem (which ending up being something else causing it) but we tried to adjust the tps and we were getting voltage then all of a sudden nothing. if the TPS is bad will the idle still react just to the machanical motion of adjusting it?
#5
Original Gangster/Rotary!
iTrader: (213)
I'd remove the TPS and re-install it. You might have to remove the UIM/TB as an assembly in order to get it at the TPS and really inspect it. Could be you cracked the connector or the TPS itself somehow---I've seen it happen.
#7
Original Gangster/Rotary!
iTrader: (213)
I wouldnt recommend throwing new parts at the problem just yet, the TPS does not usually go bad.
Trending Topics
#8
covered in dust
Thread Starter
iTrader: (1)
Join Date: Apr 2005
Location: new mexico
Posts: 451
Likes: 0
Received 0 Likes
on
0 Posts
When you say you've taken 'it' off, do you mean removing the TPS from the housing? If you reinstalled it improperly, you'll get a voltage reading of zero. The small prongs in the housing do *not* fit into the slots on the arms of the TPS---they rest up against the backside of the 'U' shaped slots, if that makes sense.
I wouldnt recommend throwing new parts at the problem just yet, the TPS does not usually go bad.
I wouldnt recommend throwing new parts at the problem just yet, the TPS does not usually go bad.
Thread
Thread Starter
Forum
Replies
Last Post